Search results

  1. ky_kneedragger

    shorty's or long tubes

    i put a set of comp cam 278's in my oo gt,i bought a typhoon intake,and i have upper plenum and t/b.i've basicly got everything comp recommends except for headers! i cant decide which kind to go with,i've always liked l/t's but my pockets are gettin' empty so thought of going with shorty's. any...
  2. ky_kneedragger

    Head Questions part 2

    after i got looking at it and thinking bout the money i have wasted so far!!!! i'm gonna do some cutting on the pistons and make room for the valves, the car ran too good and started great for it to have been out of time. i done some cutting on a 5.0 i had b/c i was worried about valve clearance...
  3. ky_kneedragger

    Head Questions part 2

    also would i have to get adjustable cam gears to degree the cams??
  4. ky_kneedragger

    Head Questions part 2

    well the guy i got them from said he ran these in stock heads and bottom end.i have comp cams springs,i was in the process of putting these in..too late no i guess,but uh i think maybe the last time i timed it that it was maybe still out b/c i figure that the noise i heard b4 was the valves...
  5. ky_kneedragger

    New sound started coming from the motor tonight, has me worried...

    how many miles are on it? my car made what sounds like the same noises and i later found that my timing chain had worn through the guides and into the tensioners!!! it costed me 131.00 at a Ford dealership with my discount.my car has around 65,000 on it..
  6. ky_kneedragger

    Head Questions part 2

    Well i finally pulled the head from my '00 gt and thought i had a bent valve,turns out it had a small piece of metal holding it open!!! It all started when i bought a set of comp cams ( #xe278ah ) i dove into it all without much research and have had problems ever since. when i pulled the timing...
  7. ky_kneedragger

    What is needed to block off EGR?

    so by deleting the egr,it would have more power and or run better???
  8. ky_kneedragger

    4.6 dohc heads???

    well i passed on those heads and found some different 2v heads 5.4 from a f-150 around 00-01 ( i think ) they have the stock cams with the pressed on gears and they also have P I on the front of them. the cast # i got off of them are RF-2L1E-6090-C20B.
  9. ky_kneedragger

    Head Questions.

    well i counted the valve cover bolts and they had 13 like my stock heads,but the cast number is RF-2L1E-6090-C20B. did the romeo heads have pressed on cam gears??? my windsor cams did. if they are romeo what would i need to run them besides the covers?
  10. ky_kneedragger

    Head Questions.

    they may be but doesn't romeo or windsor heads come pi? and on the front of the heads behind the timing cover they have pi stamped in them
  11. ky_kneedragger

    Head Questions.

    what do you mean by " the inferior spark plug thread design."?
  12. ky_kneedragger

    Head Questions.

    i also got thinking about compression as well,any idea to find out the combustion chamber on these heads by using the cast numers? the cast is RF-2L1E-6090-C20B
  13. ky_kneedragger

    Head Questions.

    do you remember what the cast #'s were??
  14. ky_kneedragger

    Head Questions.

    Hey Guys, I have a 2000 GT with a warped valve, (long story) Anyway i found a set of heads at a pick a part today. They are RF-2L1E-6090-C20B. Will these fit with no problems on my engine? They are in great shape. They are on a truck 5.4. Anything I should look for? Combustion chambers...
  15. ky_kneedragger

    4.6 dohc heads???

    i found a set of heads from a 94 4.6 and the part # on the head is RF-F2LE-6C084-CB. they have everything but the cam covers.i was wondering if the timing cover would fit my '00 windsor motor????
  16. ky_kneedragger

    need some advice

    very good times....very very good....lol
  17. ky_kneedragger

    need some advice

    well i bent a valve in my 00 gt and i have trying to figure out what to do.should i have this head fixed,or buy a diff set,or maybe buy a complete motor to just swap into my car then later build the **** outta my factory 4.6? i dont have a lot of cash to blow on it right now,but i would like...
  18. ky_kneedragger

    2000 gt engine noise

    well i like it pretty good. i think i went a lil too big,but its go big or go home right???lol. mine starts pulling hard around 3200 rpms and under that it wont fall out of a tree..lol but i got a 125 shot to help with that.
  19. ky_kneedragger

    lightning maf????

    ok man,thanks for the help
  20. ky_kneedragger

    2000 gt engine noise

    FIXED IT!!!!
Top Bottom
Back
Forums
Menu