Search results

  1. triggz

    Best Nitrous Kit? Leaning Toward NX

    I highly recommend the NX wet kit (NOT the plate kit). The direct port and plate systems have potential and in theory are superior, but in the real world you end up with difficult tuning issues and more parts to fail/leak. The Zex/Venom are over-glorified wet kits clamped down inside shiny boxes...
  2. triggz

    What do you think of the new gauge panel?

    honestly, super-gaudy. i would giggle even if it ran 10s... why not get/make one like this?
  3. triggz

    I NEED TIRES

    Sumitomo HTR ZII's cannot be beaten. Under $100 for factory size and even 275/40/17s..
  4. triggz

    Pin connections for cig lighter?

    Anyone know which pin is what? I'm re-wiring the cig lighter in my car onto another circuit.. The factory connector seems dead (checked fuses) the connector is shaped like this: [] [] ..[] 1 2 ..3 I think #1 is +12, and #3 is the ground.. #2 looks like it goes to a small metal...
  5. triggz

    to many cranks to start

    I saw a '98 with the same problem, I believe they replaced the orings and seals around the pump and various things like that and it fixed it.
  6. triggz

    Why is it important for a gauges ground lead to be near the sending unit?

    On all the Autometer instructions for their gauges, it specifies that the ground wire on the gauge should be a "good engine ground near the sender". Why does it matter? Won't grounding it to a chassis ground or the neg battery terminal be just the same? I'm redoing all of my accessory...
  7. triggz

    Magic Eraser FTMFW! *pics!*

    WHOA. My jaw dropped when I saw that pic. My seats look just like yours do prior to cleaning.. I think I have some of those things laying around too so I'll be doing that today. I wonder how well it would work on a convertible top?
  8. triggz

    saleen body kit

    saleen is the worst quality ever i would look into ABC's replicas. see if they are made from different molds.
  9. triggz

    Rear Brake Calipers GT vs Cobra

    I have also heard people say that the larger rotors will fit a stock GT. Although the pads must be worn down or cobra pads used to compensate for the thicker rotor (I believe its vented).
  10. triggz

    Paint/prep help and how to install S281 Spoiler (99+)

    Thats a very interesting company.. So they make their OWN mold of the saleen wing, or what? Does it lack the official saleen stamp on the inside? I love the 3piece wing, but it fits like 3 pieces if sh_t.
  11. triggz

    Did anyone elses saleen brake light fade pink? (warning: saleen rant)

    In less than a year my brake light in my 3-piece saleen wing faded from a vibrant red to pale, washed out pink. It was so horribly ugly I sprayed it with transparent black spraypaint to just make it match the body, which looks pretty good too. <rant> It pisses me off so bad with how much I...
  12. triggz

    Anybody polished/painted a nitrous bottle?

    I'm sick of the way my bottle looks, its the plain white NX bottle and the sticker is all messed up, blah it just looks nasty. How hard is it to polish one to a chrome-like finish? What about paint, what kind/how much would you use? Any ideas on making it look nicer are appreciated :SNSign:
  13. triggz

    Wires for amp signal on non-mach stereo?

    Does anyone have a diagram or chart for which wires are the +/- speaker inputs for the rear speakers in the main wire loom in the back? We are adding a ~1000w amp/sub, already have a hi/lo impedence converter with rca outs so all we need is to find what wires to tap off of. TIA
  14. triggz

    Brake problem??

    You always should pump the pedal 20 or so times after a pad change to run the caliper pistons out so that the pads are placed correctly against the rotors. There is slack between the pads/rotor and the lack of resistance to build line pressure causes the pedal to go to the floor... If you...
  15. triggz

    Where can i order OEM brake pads from??

    Randy Stinchcomb at ************ has the hookup edit: ugh, modular depot dot com
  16. triggz

    anyone with a saleen 3 piece wing?

    Yeah mine always puddles on the drivers side. Does your wing sit crooked? Mine as well as a friends both side kind of sideways on the car.. the driver side of the brakelight is higher than the passenger side.
  17. triggz

    thinkin about a 4.6? 96-98

    Very comparable to the 99-04's, there are only a few minor differences. Just about everything for 99+ will work on them. Biggest con you will notice is parts are much more expensive compared to the 5.0. There are simple kits which make bolting on the PI heads a very simple task. I dont know...
  18. triggz

    VALVE BODY KIT

    a ford service technician named mike did my jmod :shock: +1 for jmod though, its excellent.
  19. triggz

    oil out the tailpipes

    if oil and coolant are both gone out the exhaust, sounds like head gaskets (or possible cracked heads/block). could be repairable. what kind of abuse has the engine seen? nitrous? SC?