Search results

  1. Daniel50

    How Many Passes on a Set of ET Streets

    my et streets lasted less than 50 passes. but i alwasy believe in a good burnout before each pass on them. 2nd gear burnout held until i can see smoke.
  2. Daniel50

    Need your opinion on a shortblock upgrade

    are you looking to upgrade the block itself or the internals in the block? if you looking into upgrading the block i'd suggest the ford R block or the rare A block. if you got the money of course the dart block. if you want just the internals id go with chp or dss for a complete block. or how...
  3. Daniel50

    going to the track with this setup

    yeah i got about 50 track passes under my belt plus road racing experience and a ton of street track practice lol
  4. Daniel50

    going to the track with this setup

    time to take my 94gt to the track. had the car for about a month now. bought it all stock. this will be the setup -Moroso Drag Springs -KYB AGX Shocks (Front will be set to super soft 1) -3.73 Gears -BFG Drag Radials -King Cobra Clutch -Longtubes/ O-R X pipe/ 2.5 catback -BBK CAI -Mac...
  5. Daniel50

    GT-40's on the cheap???

    a good cam, the ported gt-40's, and intake with the supporting mods will put your around 270 to the wheels. so yes its defiently worth it
  6. Daniel50

    Heads/Cam for a 95 gt, any ideas?

    after picking up a set of gt-40's and then paying to get them ported and a valve job you will be close to the same price if not more than the afr's and the afr's will still outperform them and are aluminum so you save yourself a good 40-50lbs of the front of the car. i would go with the afr's it...
  7. Daniel50

    People with KYB AGX's, What settings work the best for you?

    i have moroso drag springs and set the front at 1 for drag racing. just got the fronts. seems to work good for launching
  8. Daniel50

    my 94gt vs 05 cobalt ss! who won?

    we went from a stop and from a roll. my 94 gt is pretty stock. mods in signature. his had a corsa cat back and cold air intake and dyno'd 232 to the wheels! crazy when they rated at only 205 to the flywheel. well i had him all the way until 4th gear and he pulls next to me. passes me around 100...
  9. Daniel50

    how to set timing

    how do i do it. where is the spout located
  10. Daniel50

    mostly stock....what timing?

    mine is a Gt i didnt realize they had that issue like that. stock timing on my fox was 10 degrees right? correct me if im wrong. whats stock on my sn95? and is bumping timing not reccomended?
  11. Daniel50

    mostly stock....what timing?

    well i just finished with a few upgrades on my newly aquired 94. BBK Cold Air Intake, Mac Longtubes, and a Maganflow X Pipe. and a fresh tune up. Now what should i set my timing to? i did 14 degress on my 91 when i had it and always thought i could use a little more. i guess the best way to go...
  12. Daniel50

    Mac Long tubes

    Just ordered a set of mac longtubes and the matching shorty off road H pipe. Had a few questions 1. What else do i need? MIL Eliminators? O2 Extensions? 2. What kind of power gains on a basically bine stock gt? 3. What Cat-back sounds the best with this in your opionion?
  13. Daniel50

    safe enough? car security

    Well i just finished with some more car security. Let me know what else i can do that i havnt done yet. that isnt stupid. like take the tires off your car or pull out your distrubutor. I have a kill switch in a hidden place :nice: plus i have a great car alarm, and THE CLUB! :D and of course...
  14. Daniel50

    Any 306 running in the 11's N/A

    so stock? cuz a high flow air filter is a power adder! jk. takes high compression motor with a big h/c/i and great traction
  15. Daniel50

    would a .035 gap and 10 degree timing kill my car?

    yes i went with autolite 24's and i will be getting a custom chip burned. but not for a while.
  16. Daniel50

    would a .035 gap and 10 degree timing kill my car?

    I am getting my car tuned for nitrous is a few weeks and want to know will a .035 gap and 10 degree timing make a huge difference in power from my .052 gap and 14 degree timing a have now off the bottle? the .035 gap and 10 degree timing was recomeneded to me by my tuner for my 100 shot.
  17. Daniel50

    started porting my e7s :D

    the new thumper? we will have foxfan heads and he'll put thumper out of business! lol jk. good luck!
  18. Daniel50

    my tuner suggests .032 gap?

    bringing my car in for some dyno tuning and this is what he told me to do before i come down. -One step colder plug gapped at .032 -Hook up my bottle warmer -Install my 30lb injecotrs and mass air -Turn timing to 10 degrees -Change oil does that gap sound right to you guys...
  19. Daniel50

    who traps 104+ with BASIC bolt ons?

    this thread is so confusing cuz i orignally posted this months ago and since then my signature has been updated with more mods. thats why i have the mods that i was asking about. and i have 30lb injectors cuz i have a custom chip and a dyno tune.
  20. Daniel50

    Nitto 555r Drag Radial

    lol they must be some crap tires if nobody has anything good to say about them! oh well i already ordered them and ill see how i like them. anything is better than a bald set off 225 winston winners that came with the car when i bought it last year.
Top Bottom
Back
Forums
Menu