Search results

  1. P

    what would it take for a 94 cobra to beat an ls1

    Yeah for about 200 miles before you blow it up :rlaugh: . You could build it right with a forged block, FMU, Meth Injection, and full suspension for about 15K and then you would have a beast!!!!! Anyways what we are all trying to say is it can easily be done with a good dose of cash money...
  2. P

    what would it take for a 94 cobra to beat an ls1

    My 02 Z28 M6 in factory stock form with 16K on the clock ran a 12.99@109 with a horrible 2.01 60' on the stock goodyears hunting for traction through first and most of second. The dyno at this point was 315/333 With a lid and catback and better tires I ran a 12.68@110 with a 1.94 on better...
  3. P

    Please! Need Help With My 306 setup 500+ H.P

    Haha no torque...the tires were spinning the first time by and it still hit the shock towers up front. The second time by I was only 3/4 throttle so I didnt spin them and got it to hook to 4k then I got out of it! The car on the street with those tires and the gears usually pulls the fronts...
  4. P

    Please! Need Help With My 306 setup 500+ H.P

    Nothing right now. I will be working on it this coming week so I will take some pics then. PM me if I forget!!!
  5. P

    Please! Need Help With My 306 setup 500+ H.P

    4" K&N Filter, and yes the hood is functional and cut round. The filter fits right up into the scoop and is almost flush with the underside of the scoop. I wanted a tall cleaner and a scoop so it worked out well. When I get the bodywork done it will all be one color with a few graphics...
  6. P

    Please! Need Help With My 306 setup 500+ H.P

    Talked to DSS!!! Awesome that they emailed me back and I got to talk to the salesman that sold me all the stuff back in 2000! Ok cam has too steep of a ramp to get more than 6100 with my springs and even with the 140 seat pressure they only see 6400 because its a street cam. Ok sounds good...
  7. P

    Please! Need Help With My 306 setup 500+ H.P

    They were crane energizer lifters. The rockers are Harland Sharp's newer design in 2000 and they eliminated the oil hole at the tope because it was allowing oil to leak by th eat of the valve causing buring oil (so I was told) but they did say if I drilled them they would quiet down but burn...
  8. P

    Please! Need Help With My 306 setup 500+ H.P

    I am waiting for DSS to respond to my email...good luck to me. NOBODY has the same combo as this!!!!! I need a suggestion on carb, jets and valve springs!!! Please if you have any input let me know!!!! Thanks
  9. P

    Please! Need Help With My 306 setup 500+ H.P

    The block was race prepped (Bored, magnafluxed, oil passages bored, deck plane, etc) but yes it is a stock 302W roller block with the DSS main stud girdle system.
  10. P

    Please! Need Help With My 306 setup 500+ H.P

    Hehehehe I wanted to see what the stock T-5 will take for a beating then Im going auto & stall. I launched at 4500 and waited for the bang after I broke in the motor and clutch and nothing...it doesnt even whine. This was a stock car I got from Texas in late 98 with 45K to be stripped an built...
  11. P

    Please! Need Help With My 306 setup 500+ H.P

    BTW car is running a Currie 9" with a locker, alum driveshaft, stock T-5 and 4.10's. It has the headers I listed, off road shorty H pipe and 2 chamber flows and a Ford Motorsport HD Clutch. I have Mickey thompson tires on centerline rims 10" or 11" I forget and stock rims on the front. The...
  12. P

    Please! Need Help With My 306 setup 500+ H.P

    Hey…thanks for reading my post…hopefully someone that knows more than I can help. This motor is in my 86 hatch and was raced for about 6 months before I put it away after getting aggravated and ran out of time to play with my toys. My father and I built this car and motor over three years of...
View older results
Top Bottom
Back
Forums
Menu