Search results

  1. Labora

    The small Stuff (Cam and Clutch install question)

    I am going to be putting a clutch kit and cam kit on my motor here pretty soon. (Stock 95 Cobra motor) I was wondering if there was any small stuff I should get before hand? Cam Kit: Crane 2031 cam Crane Cams 444226 - Crane CompuCam Camshaft and Spring Kits - summitracing.com Rather not do a...
  2. Labora

    New Carpet, Steering Wheel, Clock Spring..PICS!!

    Black carpet > Tan. :)
  3. Labora

    Power steering pulley tool, how to install pulley.

    There is a tool to push it back on. (Don't recall if it is the same one as the puller or not.) If yours is like mine tighten it up till you think you are done, tighten it some more THEN see if the belt lines up correctly. :rlaugh:
  4. Labora

    goin crazy tryin to compress my rear brake pistons on my 95 cobra?

    I would highly suggest getting a shop manual for your car, it covers this job. Also using a C clamp can damage the piston, hopefully yours are all right.
  5. Labora

    odd situation, runing lean

    I was kind of thinking that his math was possibly off one way or another also.
  6. Labora

    Subframe/ Clutch ?

    I liked my thru the floor subframes, but most people don't like that extra trouble. I'd do Full lengths weld in at a bare minimum if it was me probably pick up some MM or have a chassis guy build some similar.
  7. Labora

    Howling from the rear.....

    Check your rear end gear level asap.
  8. Labora

    Spark Plug Wire Holders

    Looks cool might have to order a set, do they clear the driver side AC lines fine??
  9. Labora

    Project Phoenix (94 Cobra)

    I ALMOST bought a 95 GT roller, since I have all the parts to a Cobra anyhow glad I didn't... Awesome I liked my 4.10s but 3.73s are pretty good for road course/autox too so I will have to see how they work out. :) I will be sure to check and see if it has a chip or not. And that thing came...
  10. Labora

    Project Phoenix (94 Cobra)

    Thanks for checking out the post man. :) I am liking the interior now, I will probably end up removing the pass airbag for a black one too even thou it looks awesome the way it is. (I need to sell the air bags in a set not 1 of each color. :( ) Thinking of switching to a 99-04 center console...
  11. Labora

    Do I need 24lbs injectors? 95 GT

    I'm about to order a crane 2031 myself. It is designed for the 93-95 Cobra (Gt40 stuff) with our funky computer in mind...
  12. Labora

    Project Phoenix (94 Cobra)

    Put most of the interior back together had to clean my black carpet power sprayer and vacuum did wonders it had alot of glass/trash on it..... (Yah I need new floor mats) Looks way better then the tan IMO. Removed the rear seat belts and put in my Rear Seat Delete. Finished the trunk...
  13. Labora

    Project Phoenix (94 Cobra)

    The 94 is a roller, I am going to drop my 95 motor/tranny into it.
  14. Labora

    Project Phoenix (94 Cobra)

    Update today and more work tomorrow. I threw a new fuel pump in the car, I've had a new 255 Walbaro setting around forever decided to ditch the external pump to make things less complicated. Also painted my old gas cover black red cover wasn't my style.... Also had to spend some time in...
  15. Labora

    Project Phoenix (94 Cobra)

    (If You want some back story on this project check out this thread.) RICEKILLER.COM FORUMS Super short version is my 95 is totaled and I'm using the parts from it for this 94 which is a roller and was also previously owned by somebody here on stangnet. :D Started some work clay bared the...
  16. Labora

    94-95 t-5 trans harness

    The backup light is what I was forgetting. :nice: I may, I currently have 2 engine harness and 2 fuse box harness. All for 1 car not going to sell till I get this 94 running. (should be a tech thread soonish)
  17. Labora

    94-95 t-5 trans harness

    I thought the "trans harness" was all one big harness that also has the injectors, oil pressure sender, etc among other things. What is even different for autos? I think the only plug for a t5 is for speedo which should be the same as a auto anyhow? (or is there another I'm forgetting) I...
  18. Labora

    Bent Axle Tube Rear end trash?

    I will take the cover off today and take a look, gotta try and bleed some break pressure and see if the whole thing will rotate or not...
  19. Labora

    Bent Axle Tube Rear end trash?

    Bent Axle Tube = Rear end trash? I have a rear end from my 95 that the axle tube is bent on due to a wreck (pass side) is the rear end/gear set more then likely trashed? Should I have it checked out before hauling it off to the junkyard or not bother? (I haven't even pulled the cover off to...
  20. Labora

    Initial startup problem.

    FYI my Coolant Temp sensor was doing this @ around 65k miles on the clock.... If yours is stock I'd still switch it out.
Top Bottom
Back
Forums
Menu