Search results

  1. 340.29m/s

    Recalibrating Speedo After Gears.

    D'oh, I knew that... I'm just an idiot. Anyway, I still say get the programmer.
  2. 340.29m/s

    Recalibrating Speedo After Gears.

    You can get the Ford Racing Speed Cal from www.gefracing.com for $88. This is not going to change shift point, but it will correct the speedo so you shift at the same time you do now. If you were going to get a chip reflash... you have to actually buy the chip. You cant just reflash the...
  3. 340.29m/s

    Questions About Timing Adj

    Rebel :p
  4. 340.29m/s

    Chip VS. Tuner

    I know that the predator allows you to bump up the timing and fuel at set increments. (ie. 2% from 2k-4k RPM) etc... I believe the chip can do everything the tuner can but much more in depth. (ie, set exact a/f ratios and such) The chip would have to be dyno tuned to make changes whereas...
  5. 340.29m/s

    Ford 4.10's/FRPP4.10's Difference?

    Ok, I realize I have been posting a lot of n00b questions lately... but atleast they are somewhat different from the usual. My question is how much different are a set of Ford OEM 4.10's (say, from an explorer) and the FRPP 4.10's? Are they actually the same or are the FRPP's dramatically...
  6. 340.29m/s

    you O/R h-pipe and prochamber owners

    Seems that everyone with O/R H pipes are also using flows. Has anyone ever heard a MAC O/R H with Magnapacks or Borla Stingers? I guess I gotta head over to the mustang exhaust site and see if I can find a clip.
  7. 340.29m/s

    Mac Hpipe is LOUD!!!!!!!!!!!

    It is aluminized/un-coated though, correct? Is it going to rust out on me within a year or can I atleast expect a good 3-4 years out of it?
  8. 340.29m/s

    Mac Hpipe is LOUD!!!!!!!!!!!

    Wow, I just realized how much cheaper the Mac H is than the MRT! Is the Mac stuff not built as well, or why is it reliatively cheap? Also, has anyone ever heard a Mac H with either Magnapacks or Borla Stingers? I don't mind it being loud but I absolutely MUST have a good tone.
  9. 340.29m/s

    FRPP Speed Recalibrator?

    Sweet, Can't really complain with FRPP products that are cheaper than the aftermarket stuff :nice:
  10. 340.29m/s

    FRPP Speed Recalibrator?

    Any idea why no one ever talks about them?
  11. 340.29m/s

    FRPP Speed Recalibrator?

    I am sure this is a n00b question, but I just noticed a Ford Racing speedcal on the gefracing.com site but have only ever heard of the Speedcal and Abbott (?) The website says specifically that it does not work for some Ford products, is this the case with the Mustang? BTW, it is only 88...
  12. 340.29m/s

    Anyone have Moser 28-spline axles?

    According to the mach1registry.com the forged 28 spline axles are about 25% stronger than the stock axles. Apparently there have been atleast a couple guys that have been running 4.10's and forged 28 splines and they snapped the axles in just a few runs. (There is also more power in the...
  13. 340.29m/s

    4.6 vs 5.0

    Long live the 4.6 DOHC 4V!
  14. 340.29m/s

    How hard is it to steal a 99-2004 stang

    :stupid:
  15. 340.29m/s

    Mach 1 Dynoed @ 340.84 RWHP ! + Videos !

    Damn, if only I had $2000 sitting around... I assume that quite a bit of low end torque was lost though, I've always heard that LT's and Xpipes both lose torque down low. (High Flow cats probably hurt low-end torque also) I still bet with a set of 4.10/4.30's it would be tons of fun to...
  16. 340.29m/s

    Weight Reduction

    My point exactly, I wasn't trying to be sarcastic....Most people over look this easy way of reducing weight.
  17. 340.29m/s

    Weight Reduction

    Depending on how much you weigh, you could drop off 20 lbs or so there... :shrug:
  18. 340.29m/s

    Shaker system

    Mine was surprisingly easy to do... It was like it shoulda come that way from the factory! :jester:
  19. 340.29m/s

    Got me a Stang!!!!

    I had a 1991 300zx NA before I got the new Mach.... I had tons of fun with it. I am going to assume you did not have the TT model, in which case you did a good switch. If my 300zx would have been TT, I would still be cruising around in it.... but no such luck.
  20. 340.29m/s

    Best H Pipe Fit?

    MRT makes catted and non catted H pipes. Pretty expensive though. http://mustangracing.mrt-direct.com/hpipe.php
Top Bottom
Back
Forums
Menu