Got me a Stang!!!!

[JakeDaSnake]

I just traded my 1990 300zx for a 1996 Mustang GT!!!!!!!! I love this car!!! and the best part about it is it doesn't ride like a go-kart! anyway I was just lookin around at some mods for the motor... whats the best intake I can put on it?? and are Steeda underdrive pullies any good???

Later
Jake

 

[Makalani_96GT]

steeda udp's rule

 

[jeff1414]

I just traded my 1990 300zx for a 1996 Mustang GT!!!!!!!! I love this car!!! and the best part about it is it doesn't ride like a go-kart! anyway I was just lookin around at some mods for the motor... whats the best intake I can put on it?? and are Steeda underdrive pullies any good???

Later
Jake

I would do A pi headswap then you will be up with the 99+ gts and the
Steeda underdrive pullies are a good mod!! Welcome to moding the stang

 

[mpcv2000]

Are Steeda underdrive pullies any good???

Later
Jake

Congrats on the new ride !

Pullies are way better then Cold Air , at least you'll gain something...

 

[FallenPhoenix]

I would have kept the 300ZX I love those cars

Congrats on the new stang, headswap should be your first goal

 

[AirWolf87]

congrats on the Stang... i was in ur position 3 months ago.....as you read more and more about stangnet, there are 4 mods that everyone swears by.....PI head/Intake manifold swap, Steeda U/D pullies, Tri-ax short shifter and Ford Racing Gears.

 

[jrc_03_gt]

Congrats you will be hooked . LOL! Get GEARS! get ford racing gears and go with 4.10's. Its the best sotp feeling for the buck. I paid $139 at gefracing.com. for the gears. My stang is a rocket now out of the hole.

 

[JakeDaSnake]

Hey, thanks guys, but I dont know if I wanna get 4.10's I do a good bit a highway driving and its my everyday car... whats it gonna rev. goin about 80 with 4.10's in 5th gear??? seems like it would work it to hard...

Later
Jake

 

[340.29m/s]

I had a 1991 300zx NA before I got the new Mach.... I had tons of fun with it.

I am going to assume you did not have the TT model, in which case you did a good switch.

If my 300zx would have been TT, I would still be cruising around in it.... but no such luck.

 

[jrc_03_gt]

http://www.tchracing.com/tech/gearcalc.php

this is a caculator for you. I tack 3000 RPM'S in 5th gear at 90 MPH. I have an 03 gt.

 

[Ryan02Stang]

Great to hear! I would start with exhaust, longtubes if you can afford it...if not get an X pipe and catback. Pullies, plenum and throttle body, shifter are all great mods to start out with.

 

[decoy562]

I would do A pi headswap then you will be up with the 99+ gts and the
Steeda underdrive pullies are a good mod!! Welcome to moding the stang

PI heads would be great for your car

 

[JakeDaSnake]

were can I get the PI heads and how much would they run me??? Im thinkin around 600-700 a head cause its a OHC motor... but its already got the exhuast work done, runnin 2 high flow cats, stock H pipe and 2 Dynamax bullit mufflers...

Later
Jake

 

[stangchef]

Ditch the stock mid pipe....You can get heads,intake and PI cams..for around 700-800 used....ford wants a ridiculous amout of money for new ones....Pullies are a good mod almost everyone here preaches steeda.(so will quietly say I picked up 10rwhp with MAC on the dyno and it was 50 degrees warmer than the last dyno without them).....as far as CAI I run a UPR and like it alot especially when you hear it after stomping on the gas. If you do the swap dont forget to include a dyno tune, a hypertech and if it were me the upgraded computer from ford racing.....I am only a few more paychecks away from doin mine!!!!!!! YEAH!!!!