Search results

  1. MT1083

    Help- GT going 13" Rotors

    The kit I bought came with rotors, calipers, pads, ss lines w/ banjo bolts. That should be all you need. You don't need the ss lines but I did it for looks and because they should have a better feel anyway. If you need any OEM parts, pm me because there is a dealer I know that sells everything...
  2. MT1083

    Are there different types of Bilstein strut/shocks for Mustang GT's?

    I bought mine off of ebay too. I asked the guy what the part numbers were before I bought them and they matched up to what MM sold. FRONT V36-4138-H1 REAR BE5-6418-H0
  3. MT1083

    ATTN: Vert Owners! Vert top leaking, two possible places... NEED HELP! (Pics, DUW)

    I'll take a look at mine tonight and if you still need a pic, I'll email you one. Just let me know.
  4. MT1083

    Suspension help please

    I bought Bilstein struts and shocks for around $469 on ebay a couple of months ago. Just do a search on Bilstein and you find a dealer named tec deals or something like that.
  5. MT1083

    Where to get a new AC vent cover?

    there is a Ford dealership in Tousley, MN that sells at 10% over cost. You can call steve at 1-800-328-9552
  6. MT1083

    Rear end squeaks like hell!!

    I've been told that if you install control arms, then quad shocks are no longer needed.
  7. MT1083

    struts & shocks ?

    I was told to go with Bilstein with my 1.25" drop. I wrote maximum motorsports and they helped me out with everything and answered all my questions. I didn't buy the struts and shocks from them though because I found them much cheaper at another place. I bought their c/c plates with the springs...
  8. MT1083

    Which side is bank one?

    :rlaugh: it never fails that every project or thing I have to do is a pain in the but too. You are not alone. haha
  9. MT1083

    kenne bell on daily driver

    The KB is great for a daily driver. You are not in boost unless you want to be. Would you rather be in high rpm's for fun or would you rather have a little more fun down low? I've never driven a centri's car, but I'm sure it would be fine too, just depends on your driving habits.
  10. MT1083

    Which side is bank one?

    bank 1= passenger side bank 2= driver side
  11. MT1083

    Control Arm?

    You can get new stock replacement parts for 10% over Ford's cost if you are interested. Just pm me if you want the dealer's number. Or you can talk to Randy Stinchcomb on here...he can get cheap parts as well.
  12. MT1083

    Engine Builder

    Mph
  13. MT1083

    Control Arm?

    Yeah look at your control arm (A-arm) and see if it looks bent.
  14. MT1083

    Catless Convertible?

    I've never heard of that before.
  15. MT1083

    problem with upr control arms

    found the problem. They are supposed to send new sleeves so that you can punch out the smaller ones and use the bigger sleeves. Apparently they supply all the sleeves normally but they only sent me 2. I need 6 more in order to finish. So in case any of you run into that problem, now you know...
  16. MT1083

    Shock Help Quick!

    I looked at the top and there is a place for a torx wrench. Thanks for the help!
  17. MT1083

    problem with upr control arms

    I'm doing all of my rear suspension right now and I've run into another problem. I was told by upr to reuse my factory lca bolts and nuts. One problems though...they won't fit into the holes of the bushings. The hole in the bushing is too small in diameter. Anyone run into this?
  18. MT1083

    Shock Help Quick!

    I'm installing my Bilstein shocks now and the top nut won't torque down because the rod that is threads onto keeps spinning. The dust cover is already on and I don't see any way to tighten the top nut without the dust cover already on. How do I keep the rod from spinning so that I can torque...
  19. MT1083

    Air in brake lines

    Did you bleed the master cylinder? If you didn't, give that a try. :nice:
  20. MT1083

    Bassani Exhaust

    when I bought mine www.houstonperformance.com had the best prices at the time.
Top Bottom
Back
Forums
Menu