Search results

  1. Boostedpimp

    Best way to install a new rear end housing

    damn I always wanted a set of those steeda lower control arms... maybe one day
  2. Boostedpimp

    AEROMOTIVE 340LPH STEALTH FUEL PUMP

    Yup that was a big name back in the MM&FF days
  3. Boostedpimp

    AEROMOTIVE 340LPH STEALTH FUEL PUMP

    Yup
  4. Boostedpimp

    AEROMOTIVE 340LPH STEALTH FUEL PUMP

    The prime period is part of the ECM's logic, past the prime the ECM just needs to see a PIP signal to initiate the pump. PIP signal then passes through the TFI. Not sure how you have yours wired up but I've had a ECU in the past constantly run the pump and it turned out to be leaking caps on...
  5. Boostedpimp

    Build Thread Mustang5L5's Build Thread -

    Yeah pretty much common sense here but I was going to say if the factory deadening was lifting or cracking at all. Take the time to remove it first but sounds like you've got a solid plan
  6. Boostedpimp

    Build Thread Mustang5L5's Build Thread -

    Did you remove all the factory deadening first before laying down the kilamat?
  7. Boostedpimp

    Drivetrain Searching for a clutch

    Depends on power level so you may want to list the modifications to the car
  8. Boostedpimp

    Engine Are open air intakes bad?

    My 24lb injectors are blue
  9. Boostedpimp

    Progress Thread Project Leroy

    Post a pic of those seats please.......... and you'll love the mm grip box. I have it on a 91 coupe of mine and it just completely transformed the car.
  10. Boostedpimp

    Progress Thread Progress Thread kinda stalled- looking to get it back going again!

    i've seen on facebook groups that someone used the fancy aftermarket hex fender bolts to secure their cover and it looks slick
  11. Boostedpimp

    Would tou run this clutch/flywheel

    I'd run it
  12. Boostedpimp

    Fuel The fuel pump doesn't stop priming and I can hear a hissing noise on the lower intake area (passenger side).

    I've had the issue with the fuel pump running constantly and it ended up being a burnt trace in the ECU just like mentioned above
  13. Boostedpimp

    T5z vs tkx , cost and value.

    If it were my money I would just skip right to the tkx and start enjoying it. From a value aspect having a tkx trans would probably be a solid selling point as well when the time came.
  14. Boostedpimp

    Hey whats up! More 2.3 power needed

    Oh, I haven't been there in a long time but live a town away
  15. Boostedpimp

    Fox Seats

    If it were me, I would sell those seats and try to find a clean set of factory seats. They may have changed them but a while back with in the first few months they released the seats I seen a pair in a car at a local show and was not impressed. They just looked off
  16. Boostedpimp

    Suspension Front LCA rebuild **FAIL**

    I fix this issue by installing coilovers in the front of each fox I own :)
  17. Boostedpimp

    Engine Are open air intakes bad?

    What do you have? I believe I had a 70mm from a sn95 and eventually swapped that to a prom 75 bullet and it fit fine with that anderson pipe. You could call Anderson they are good and have been into the fox game since the beginning.
  18. Boostedpimp

    Hey whats up! More 2.3 power needed

    Was that out in Jackson area?
  19. Boostedpimp

    Engine Are open air intakes bad?

    If your going to drop that kind of coin on a cold air intake I would suggest this one. I've used it on a prior foxbody and it worked great. I did not require a larger whole in the fender apron like the other larger 4" ones do. I use the 4" ones now on both my current cars but for a car that is...
  20. Boostedpimp

    Progress Thread Project Leroy

    nooooo, just make sure you have a 2.5" or more hood... you'll have the only fox around that actually needs a cowl hood
Top Bottom
Back
Forums
Menu