Search results

  1. Killercanary

    Update on my life!

    Great to hear you are doing well and staying out of trouble. :) Congrats on the expected new addition. Mna, how much does that house weigh with all of that tile??? :) It looks great BTW. I just moved into a new home and recently finished painting a ton of the interior walls myself... it...
  2. Killercanary

    Looking for input on an important decision with my '95 'vert... LONG

    As many of you know I bought a PTK turbo kit for my car a number of years go. It was a top notch kit complete with a swain coated hot side, a turbosmart e-boost controller, and a T64e turbo. I then got busy and built my 331ci dart block as the foundation for this. Since then I added better...
  3. Killercanary

    Really need help with the focus...

    How many miles are on it? My SVT has been taking longer to start than normal. I know they recommend a timing belt change at 100K miles, mine has 109K on it now. I called about a month ago and was quoted $500 to replace it. OUCH! I know it requires a special tool to hold the cam gears but I'm...
  4. Killercanary

    HELP! Hood pin question.......

    From what I think you are asking, cutting a hole in the underside of your hood is the solution. I had to do this when I installed my hood locks. The hood is double walled and the screws are meant to only go through one wall of the hood, so the underside one normally needs to be cut.
  5. Killercanary

    They Found Noah's Ark

    The best part is Crunked was actually a great guy from the board here playing around with another user name. The site was slow and he decided to spice it up a little. LOL! Obviously it made an impact as that was over 5 years ago and we're still talking about it. It was fun once I knew who it...
  6. Killercanary

    They Found Noah's Ark

    Oh, I found it!!! Its in the deleted threads though so I can't link it here. I'll copy and paste some of the lines. I highlighted and bolded the E cam quote from Crunked-A-Stang. LOL! Good times! This continued on for a few pages before it was locked and deleted and Crunked was banned.
  7. Killercanary

    They Found Noah's Ark

    That dude was a dick! LOL! :) Man that brought back some memories! A bunch of us still make references to that once in a while. I can't believe its been that long, and yet many of us are still here and...
  8. Killercanary

    No More Cap n Rotor

    LOL! If you think that is hard you should be me... my turbo kit has been sitting in a corner in my garage since 2005 along with a T64e and a T76 that I have for it. Someday it'll be on the car... LOL!
  9. Killercanary

    No More Cap n Rotor

    I have the AEM EMS and the LS1 coils... I just need the EPM now and time to figure out how to make it work. Your combo is killer Chris!
  10. Killercanary

    vibration after clutch install

    Did you replace the pilot bearing? Were you carefully not to knick it/knock it out? Back when I first started working on cars I couldn't get the tranny to go all the way in on my 1st clutch install. About 1/8" was sticking out of the bellhousing so I did the unthinkable and sucked it the rest...
  11. Killercanary

    tell me what c/c plates you use and why

    I have steeda 4 bolt's on my '95 and MM on my '94. If I was starting from scratch and wanted function over looks I'd run the MM's. I run them on my '94 autocross car with Koni SA sports and a MM coil-over kit with 10" 425lb springs and I have absolutely no noise from them. I run Strange...
  12. Killercanary

    95 mustang gt stock vs 2000 pontiac gtp vs 2004 stock celica n/a 4 cyl

    Done! :D http://www.stangnet.com/mustang-forums/800828-read-me-first-stangnets-terms-service-aka-rules.html
  13. Killercanary

    READ ME FIRST... Stangnet's Terms of Service AKA "The Rules"

    General Rules: * Street Racing threads are not permitted on StangNet.com and will be deleted by moderators. * While debating and discussion is fine, we will not tolerate rudeness, insulting posts, personal attacks or purposeless inflammatory posts. Our decision is final in these matters...
  14. Killercanary

    Blew stuff up at the track

    That sucks. I hope its only a head gasket because with that much power on tap, there can be far worse things that can happen. Its nice to see you back on here though!
  15. Killercanary

    95 mustang gt stock vs 2000 pontiac gtp vs 2004 stock celica n/a 4 cyl

    Thus the reason I didn't lock it Kurt. This is a new member though and I wanted him to know of the rules before this thread went in the wrong direction. I also know where these kind of threads go when posters are not reminded of the rules. BTW- I hate internet racers. :) LOL!
  16. Killercanary

    95 mustang gt stock vs 2000 pontiac gtp vs 2004 stock celica n/a 4 cyl

    When they are run at the track the timing boards will tell you the answer. :) As a reminder, there are no street racing threads allowed here.
  17. Killercanary

    New race shoes for the Cobra

    Well, I need longer wheels studs before I can mount them on the Cobra BUT... I do have 3" studs on the '95 up front so here is a few pics: Ryan- that is a hard one to answer. This kind of racing isn't like drag racing where you can compare times from one outing to the...
  18. Killercanary

    New race shoes for the Cobra

    The only way I continue this habit is to keep my eyes and ears open for deals. I buy a lot of stuff used, or when I find specials. Its still an expensive hobby, but I have friends who's yearly golf and county club fees way outweigh the little bit I spend on my cars.
  19. Killercanary

    New race shoes for the Cobra

    Thanks all! 94GTfreak- Thanks, I can't wait to see them on the car too!!! yukisho- I've seen way too many pics that people have put up here and elsewhere get used by random people to sell stuff. A buddy of mine had his car pictured in a major mustang suppliers catalog and after finding...
  20. Killercanary

    New race shoes for the Cobra

    I have wanted a set of these wheels for a LONG time, especially since I got into autocross and luckily I grabbed a set today, complete with a set Hoosier Koni cup tires. I'll have to wait a few days before I can get pics of them on the car, but for now here's a little taste. These are my new...
View older results
Top Bottom
Back
Forums
Menu