Search results

  1. steeda46

    tuning chip..??

    I have a custom tuned SCT chip with 4 tunes ranging from 87 octane, two 93 octane tunes, and a 107 octane tune. It's alittle more expensive than a programmer but I am very happy with my decision to go this direction.
  2. steeda46

    P1151 Engine Code

    The car idles great and runs awesome at full throttle. The only time I can tell something is wrong is when I'm cruising at a constant speed it feels like the engine has a small amount of hesitation to it - almost like it has bad gas. I'm not running cats so my car always has a slight fuel...
  3. steeda46

    P1151 Engine Code

    Can anyone give me more details on this code and what might be causing it... P1151 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Lean - Bank No. 2.
  4. steeda46

    I need help with taking out one weel lock...

    I had this happen switching from stock to Drag Radials... lost the damn key! I took mine to the local Ford dealer, they had 4 different boxes of keys to choose from and took it right off for me at no charge. I think I was there for less than 10 minutes.
  5. steeda46

    Changing Cams

    Has anyone used this cam - CompCams 102100?
  6. steeda46

    Guage pod clusters

    Get E Up 98 - Thanks for the help, have you installed your yet? Also, Do you know if they come in different colors? tomustang - If you have a copy of the latest FF&MM they have an article about the new Roush Mustang. This is where I first saw one installed.
  7. steeda46

    Guage pod clusters

    Does anyone know where to get a gauge pod cluster like this.... I want to add several gauges and I don't like the typical A piller and/or dash pods and I thought this was pretty neet. I found this one from Roush, but I wanted to see if anyone else had a version similar to this one.
  8. steeda46

    Are heads from VT any good?

    If P/P the stock heads vs. purchasing aftermarket heads are relatively the same. Is there any disadvantage to P/P the stock heads? It seems to be more cost affective! Also, can you someone recommend a good cam to run with the fresh heads? I'm probably going to stay N/A and my car is not a...
  9. steeda46

    Are heads from VT any good?

    Is it a better deal to purchase aftermarket heads or get the stock heads P/P? (Cost and horsepower gain) I found a place here in GA that can PP your stock heads for $750.00. How much can you gain from a PP job on a NA engine?
  10. steeda46

    Port/Polish Stock '00 Heads

    Has anyone ported and polished their stock heads? If so, what kind of gains did you see. Also, I was thinking about replacing the stock cams while I had the heads off. Any suggestions on cams?
  11. steeda46

    Money and power

    JLstang351, Thanks for the site. Do you know a rough number on hp gains with a couple port and polish job?
  12. steeda46

    Money and power

    JLstang351, Thanks for the info, Yes I would love to get his number. I'm thinking about having the work done over then next few months.
  13. steeda46

    Suspension suggestion

    I'm debating going with Steeda UCA's or MM torque arm and pan hard bar. Here is my current set up... Rear- Steeda LCA, Steeda sport springs, Steeda adj sway bar, Tokico Shocks Front - Steeda sport springs, Steeda S/T brace, MM CC Plates, Tokico struts Higgins subframe connectors. My car...
  14. steeda46

    Money and power

    I have roughly $1,500 to spend on my motor... - Can you port/polish stock heads or is it worth the cost to purchase aftermarket heads and cams? http://www.foxlakeracing.com/index.php?src=gendocs&link=Fox%20Lake%20Modular%20Motor%20Heads - Is there something else that would give HP for...
  15. steeda46

    4.6L SOHC Intake Manifolds Suck

    Excuse my ignorance but what is a PI (I know what PI stands for...) intake manifold? http://www.gefracing.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=G&Product_Code=M9424P46&Category_Code=46INTAKE
  16. steeda46

    4.6L SOHC Intake Manifolds Suck

    Excuse my ignorance but what exactly is a PI (I know what PI stands for...)intake manifold? http://www.gefracing.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=G&Product_Code=M9424P46&Category_Code=46INTAKE
  17. steeda46

    Fox Lake Modular Heads

    I'm interested in the getting the Fox Lake Stage 1 Ported '99-up Modular Heads. Is anyone running these heads, if so what do I need and what can I expect for total cost?
  18. steeda46

    Muffler removal question

    I tried to disconnecting my mufflers from the exhaust pipes to install turndowns. I'm having difficulty getting the mufflers disconnected from the pipes, does anyone have any tips?
  19. steeda46

    Burn out techniques...

    I run my RPM's up to around 2500 +/- then drop the clutch and use my left foot to hold the break (one smooth motion). If you play with the throttle you could hold you car in one spot for hours...
  20. steeda46

    Dynomax Mufflers

    Can someone tell me the difference between the ultra flo mufflers and the ultra flo welded?
Top Bottom
Back
Forums
Menu