Search results

  1. dvs bullet

    Mass air conversion question

    I bought the same kit, it's not a hard job to do. jrichker is exactly right, it's plugs in you justhave to move some of the wire around.
  2. dvs bullet

    How to identify fox body fenders?

    I've heard that, but I'm running pony's on my 87, no probs. I'd be interested to hear as well
  3. dvs bullet

    T5 Fluid

    from What I've heard it isn't good for the trans. the material on the synchro collars are only compatable with certain fluids, I'd do what srothfuss said
  4. dvs bullet

    Ouch ! That hurt....

    oooooooooouuuuuuuuuuuuuuuuuuccccccchhhhhhhhh!!!!!!!!!!!!!!!! good luck, hopefull they will pay for it
  5. dvs bullet

    Your invited - Erinwood Mustang Show>>

    same here :(
  6. dvs bullet

    Taryn's new car....

    congrats on the new buy, looks in good shape ( great shell for a v8 if you change your mind later) :nice:
  7. dvs bullet

    u guys use por-15?

    I had some surface rust on my floors, after cleaning up them I put a coat on. I wasn't looking for perfection either. Just a word of advice, use gloves cause when that stuff gets on your skin it won't come off :(
  8. dvs bullet

    Hardcore Track Launching

    question, what tranny are you running? If you are running a straight t5 then I don't think that your rear end is the only thing to worry about, with that kind of torque
  9. dvs bullet

    Rough Idle, terrible cold starts

    that is a good site, it got me out of some issues thanks again jrichker
  10. dvs bullet

    Fog light button modification

    sorry, re reading that post I realize that he was saying the same thing, my bad. I thought that they were sayin that once you take the stopper block out of an lx switch you can use it, which is true if you put in the gt switch guts to make it active ( which I have done ). sorry for the confusion...
  11. dvs bullet

    Rough Idle, terrible cold starts

    If you are running rich at an idle, then your prblems are somewhere other than the tps sensor, I still suspect a leak some where check you pcv and see if it is plugged, also you could have a leak on the inside of the engine. just some thoughts
  12. dvs bullet

    Damn my interior stinks

    mine had a leaky sunroof for a long time before I got it so mine, smells like a sweaty gym sock :nonono: the only thing that I found that pushes back the smell is power out from turtle wax It's afoam that you spay in and vacuum out. It works for me for a while but I need a new carpet badly, for...
  13. dvs bullet

    oil gauge tubing length sender to A pillar??

    got the exact same set up in my car, the six foot length is perfect I used the stainless steel braided line too :nice:
  14. dvs bullet

    Fog light button modification

    the lx switch is a fake, there is nothing in the fog light portion of the switch. the gt switch has got the parts of the switch inside to make it function. the wiring for fogs and everything else is there except the fogs and a working switch on an lx so they didn't have to make two harnesses for...
  15. dvs bullet

    Fog light button modification

    No, the exterior of the switch is there, but there are no internal guts in an lx switch, ( no contact points ) :nice:
  16. dvs bullet

    T-Moss or M.Yount,or exhaust guru's come in

    so run open headers or nothing at all you need back pressure for torque period
  17. dvs bullet

    T-Moss or M.Yount,or exhaust guru's come in

    smaller pipes create more pressure, more pressure equals higher velocity ( speed of gases) this speed coming from one tube on a header creates a venturi affect pulling remaining gases in other tubes out ( like a carberator ). What some people don't get is that ther is a certain point that you...
  18. dvs bullet

    Fog light button modification

    Sorry not true, the fog switch is there but it does have any of the internal guts in the switch, you have to get a gt switch.
  19. dvs bullet

    How do you clean the maf?

    I just used brake cleaner and a piece of kleenex that I rolled up so you don't put too much pressure on it and it doen't leave any cotton behind, my car improved dramatically
  20. dvs bullet

    Can I identify the factory gear on my 89 GT from the door tag?

    I found the gt registry has alot of great info on these topics, they have a whole interactive vin tag reader
Top Bottom
Back
Forums
Menu