Search results

  1. Aryan15

    Who else is deployed?

    In relation to your thread, did anyone see the show on Discovery about the green berets deployed in Afganistan? I saw it last night and it was amazing. :flag:
  2. Aryan15

    Ventilation issues

    The vacuum servos are usually the problem or broken lines.
  3. Aryan15

    Gear Kit

    I would do the axle seals also.
  4. Aryan15

    got me a free Ranger

    I recommend the 4.0L pushrod motor. I have one with a 5-speed and its an impressive performing motor, gets good gas mileage, and has lasted a long time with 200K+.
  5. Aryan15

    HOW TO: Port and polish heads at home in under a day....

    He ported the intake using acid. Kind of a cool idea because of the consistancy and depth of penetration where its difficult to get the grinder.
  6. Aryan15

    HOW TO: Port and polish heads at home in under a day....

    I know a guy that ported his intake successfully with acid. But didn't involve doing it with it attached to the engine.
  7. Aryan15

    What is your favorite war movie(s)?

    Braveheart, Last of the Mohicans, The Patriot, Das Boot
  8. Aryan15

    need advice where to store motor for upcoming project

    As long as it stays dry, any storage shed. You can buy those giant zip lock bags for the componants you have and just WD40 the block and wrap it in plastic.
  9. Aryan15

    Got a question about selling a vehicle...

    Ask for a cashiers check
  10. Aryan15

    Bolt AND EZ-Out snapped in block.

    I would get a carbide drill and drill the ez out and bolt using plenty of lube and patience down the center trying not to violate the threads. I did the same thing and was able to pick the remainder of the bolt out.
  11. Aryan15

    Bolt AND EZ-Out snapped in block.

    Is the timing cover off? Did it break off even with the block?
  12. Aryan15

    Crank bolt removal- help!

    I used a chain wrench on the balancer.
  13. Aryan15

    Car keeps goin through dizzy caps

    Put the di-electric grease on the top, pointer, and the sparkplug terminals.
  14. Aryan15

    Best place to purchase AFR heads?

    I live 30 min away from AFR. Just thought I would share that:nice:
  15. Aryan15

    Anyone know how to fix the Map Light?

    I used JB Weld.
  16. Aryan15

    Anyone know how to fix the Map Light?

    You have to drill out the plastic rivets, pull the spring perch off, and put a spacer or different spring to close the switch. The spring loses its ability to close the switch. Then glue it back together. I've done two so far. Good luck.
  17. Aryan15

    Cylinder Balance test w/code reader problem......

    Just mash the throttle wide open for a sec.
  18. Aryan15

    Smoke problem: change valve stem seals with heads on car?

    Make sure you smack the valve retainer with a socket and hammer. It breaks the keepers loose so you're not chirping air when you compress the spring.
  19. Aryan15

    Water coming from valve covers?

    I call the mixture baby *****.
  20. Aryan15

    Inner Tie Rod Removal??? Help!!!

    The rivet is supposed to keep the inner tie rod from coming loose.
Top Bottom
Back
Forums
Menu