Search results

  1. 2

    How big of a tire can I fit on my 10 holes?

    I have 275/50's on my 10 holes.All I can say is do it if you like but i'm kickin myself for doing it. It hooks well but I had to beat the inner fenders out and had to roll the fender. It still rubs so take my advise if you will but I won't buy this size again until I get wider wheels.
  2. 2

    Rubber vs Poly vs Solid Motor Mounts

    You need to put the matching solid mount on the trans. If you don't there's gonna be some give and the trans is gonna flex and can possibly bust. You always should match your components. Solid, solid, poly poly or rubber rubber that way everything is the same.
  3. 2

    Rubber vs Poly vs Solid Motor Mounts

    I have a 331 with a rather large cam and have no issues with my solid mounts. It has a lil vibration at idle as you would expect with a lopey cam but once you start moving they are actually quite streetable. Not to mention I only paid 60 bucks for engine and trans solid mounts
  4. 2

    Will 91-93 mustang header and exhaust fit on 95 mustang?

    My friend has Flow Tech long tubes that were made for 79-93 cars. I would think you will be ok.
  5. 2

    AOD Problem

    U have a tranny cooler??? Check all your fluids and make sure the TV cable is set right. I don't know much about AOD's other than I have one. I have a shift kit and a big cooler and very rarely have any issues so far.
  6. 2

    130 amp from other ford models work on ours

    I bought one for a 94/95 from Autozone with a lifetime warranty for 140 bucks. Works great and it pretty much just plugs and plays other than a 8 gauge wire to the starter solenoid.
  7. 2

    Who has summit univ. Rad. (HELP)

    Buy you an AFCO 80111FN Aluminum Radiator - 19in. x 27 1/2in. Ford (Lightweight) $185.95 80111N Aluminum Radiator - 19in. x 27 1/2in. (Lightweight) $185.95 Either one will do ya and they are inexpensive. I have one on my stock engine with a 14 inch electric fan and it's never come close...
  8. 2

    331 stroker what exactly is it

    I just ordered a kit from Coast High Performance. They are super nice kit's a are very affordable. A 331 for under900 bucks. Just make sure your cylinders are in good enough shape to order a .30 kit. If your cylinder walls are super bad you may have to go more and more overbore.
  9. 2

    Oil pan to fit Coast High main girdle 331 stroker

    Jerry D it's scary how our combo's are. Mine is almost identical to the T. Have you dynoed or had any better runs than a 13???
  10. 2

    Oil pan to fit Coast High main girdle 331 stroker

    As title says. I need a oil pan to fit my 331 with Coast High performance Main Girdle. Thanks
  11. 2

    Injector Size

    how bout the comp cams 282. Dude at AFR said it was a killer cam and would be perfect.
  12. 2

    Injector Size

    Beasly B shoot me an e-mail or something so I can get those injectors and mass air
  13. 2

    Injector Size

    Any recommendations on a cam there GREEN. I just don't want to upgrade the AFR Springs at this point plus I have an AUTO AOD so i'm a little weary about driveability. Thanks bud
  14. 2

    Injector Size

    where are u at in Va. I'd like to take a look at your c&l and the 30's...
  15. 2

    Injector Size

    Building a 331 with AFR 185's. Should I use 24 or 30 lb injectors. Will be a nitrous car but it's a wet kit. Thanks for any input. Also will probly run a TFS 1 cam, which rockers ??? 1.7 or 1.6 Thanks Fellas
  16. 2

    Help! Fuel Pump issue

    check your relay. If i'm not mistaken it's under your driver seat on your model. If it's not there check the pass side fenerwell. Worse comes to worse some how your fuel pump shut off switch got tripped. It's in the trunk
  17. 2

    Fuel pressure gauge with NX kit

    #1 LX you the man. Thanks a bunch
  18. 2

    Fuel pressure gauge with NX kit

    ttt
  19. 2

    Fuel pressure gauge with NX kit

    I have a NX kit on my car and I want to add a Fuel Press Reg and Gauge. What do I need to make this happen??? I have the shrader valve all the way out since the NX kit eliminates it. I know I need some type of T but I don't know what the threads are on the Stock fuel rail. I think the fuel line...
  20. 2

    widest tire size on ten hole 15's?

    You guys will probly laugh but I have some Mickey T's 275/50's on my ten holes. Hooks great though hehe. Just awaiting some drag lites.
Top Bottom
Back
Forums
Menu