Search results

  1. StangPro

    Best plenum and tb

    Amaxing how many lemmings all refer the one test that actually only proves that they (all tested) perform the same. All major brnads will perform the same. Buy based on price and look. Everything MAC makes is garbage and should be avoided. Accufab and Dragon have the best quality...
  2. StangPro

    how do you change the clutch cable on an 01+ GT mustang?

    Disconnect it at the clutch quadrant, unbolt the bracket in the engine compartment, and disconnect it from the trans. Pull it out. Put new one in. Should take about 10 minutes.
  3. StangPro

    best tranny oil??

    Tremec doens't recommend a lot of things that actually fix their problems. The TTC band-aids and retarded recommendations don't help anything.
  4. StangPro

    best tranny oil??

    Since there are few other sites with as much tech as we have, you'd think everyone would look there first by default. For the lazy amongst you, here: http://www.stangpro.com/html/tutorials/other/transfluid.htm
  5. StangPro

    best tranny oil??

    Royal Purple Syncromax without a doubt is the best we've used. Red Line D4xxx (can't remember exact name) is good too. You'll need to buy 4 qts. Fill volume is just over 3qts.
  6. StangPro

    fuel Filter question

    If you have a schrader valve, use it. If not, pull the fuse and let it die. The newer cars don't hav valves and have to do it that way.
  7. StangPro

    Eibach Pro-Damper Kit

    No issues doens't mean they're good. They lag quite a bit which in a performance application is baaaaddd.
  8. StangPro

    Eibach Pro-Damper Kit

    Bilstein's and Tokico's are good. European Koni's are good, but the US built parts, as sad as it is to say, have some quality issues too. The Eibachs are built in Mexico by ZF Sachs and have many,many quality issues. The last set we tested wasn't suitable to put on a lawnmower.
  9. StangPro

    Eibach Pro-Damper Kit

    Eiback dampers are low quality garbage that should be avoided. Go with one of the quality brands.
  10. StangPro

    Cold Air Intake HELP!!!!

    You can get DeMolet systems custom painted now, so it could be nice and shiny and make good power too. Do the math. $40 for a 1-2 hp drop in junk k&n $150 for 8+hp with a JLT or DeMolet. We got 8 with just the meter forward on a stock Bullitt, and more on our '04 GT that already had a...
  11. StangPro

    4.6 Tunable Induction

    The system is awesome. We run this exact setup on our '04 GT and it got 26hp at the wheels from it. I'd stick with the stock meter though as at your mod level any aftermarket meter will most likely lose power. Check out our site for testing info on the CAI and plenum/TB
  12. StangPro

    which CAI

    Here's the pic of the DSG painted GT system. It looks hot with the Dragon plenum and TB...
  13. StangPro

    Strange whining sound after installin control arms.

    How was the condition of the spring isolators? It sounds like you have driveline noise being transmitted inside the car, which is rare with the Steeda arms. Check your spring isolators, and the grommets that close the e-brake cables to the body to make sure they are seated correctly. It's...
  14. StangPro

    Fuel Filter Location

    Another thing to note is that on newer Ford's there isn't a shreader valve to bleed the pressure. If you don't have one, the procedure is to run the car with the fuel pump relay out until it dies. Not good for the engine, but it's the only way to do it.
  15. StangPro

    Air Filter/induction changes

    This was done by HRTI on a '03 or '04 Cobra: http://www.stangpro.com/html/articles/coldairshootout.htm As for the 2v, here's our test done at Livernois Motorsports on our in-house project '04GT auto. We added the DeMolet full length kit which uses a Green USA filter which flows better than a...
  16. StangPro

    Air Filter/induction changes

    A drop-in gets you nothing, while a JLT or DeMolet can get you up to 10hp. This is one of the biggest areas of bad info people spew here. I've got a lot of data on 99-04 GT's but we don't have access to an older one to get you exact numbers on those though.
  17. StangPro

    Air in brake lines

    If you just did stainless lines, and did them right bleeding the master (which is near impossible on the car) is a waste. Take a soft faced hammer and whack the snot out of each caliper as you're bleeding it. The fronts are notorious for getting air pockets that have to be whacked out.
  18. StangPro

    Is The Bullitt Suspension A Noticeable Difference Over Stock 02?

    Eibach dampers are junk are have quality issues. The Bullitt setup is one of the best handling kits out there for the money. You may want more of a drop, so you can substitute other springs then sell the Bullitt springs on Ebay or something
  19. StangPro

    Plasma booster

    If they made one that was fast and lasted the 150k a car would I'd have one (or two) :D
  20. StangPro

    Plasma booster

    This is pretty far from reality. Everyone wants the best compromise they can get. Gas prices will be $3 a gallon soon, then higher. Where do you want your money going? To other mods or into the tank? If you build and tune for power and economy then you win both ways. A lot of our...
Top Bottom
Back
Forums
Menu