Search results

  1. SMOKEDYA

    Compression Ratio

    thanks rick
  2. SMOKEDYA

    cam help please.

    ok
  3. SMOKEDYA

    cam help please.

    As i can see its ported to the upper lower gasket, or should i say extrude honed? I'm going to port the lower to heads as well just not sure when?Yes i'm adding a 76mm turbo to it also and have a ed curtis cam for that.For now i wanna run N/A with my set us i'm asking about.Then when i pull the...
  4. SMOKEDYA

    Compression Ratio

    91 5.0 stock pistons with AFR 185 58CC heads. What would the CR be? peace john:cool:
  5. SMOKEDYA

    cam help please.

    The intake has been ported to the gaskets. peace john:cool:
  6. SMOKEDYA

    cam help please.

    So a 91 5.0 stock block,AFR 185 58CC heads,1.6 crane gold rollor rockers,4r70w trans,3.55 gears,OEM ported 93 cobra intake,24# or 60# injectors,75mm accufab tb...... so what cam and MAF? peace john
  7. SMOKEDYA

    HAPPY NEW YEAR!!!!!!!!!!!!!!!!!!!!!!!!

    Happy early new year from the west coast! Peace John
  8. SMOKEDYA

    Are 19lb injectors enough?

    I had close to the same set up as you except i didnt have the compression as you........I had ported GT40P heads and ported OEM 93 cobra intake and cam and laid out 301/318 to the wheels and had 19's. The dumb ass shop owner here decide to put in 24's and a new MAF for whatever reason,the guy i...
  9. SMOKEDYA

    351

    My 351 cost me $4500 for all new everything minus block and internals. Be very very careful of the pistons they are cast and DON'T. like boost.... 94's start roller blocks. 69-74 are the strongest blocks.look by where the starter mounts and the year is stamped there on the block,OR see if there...
  10. SMOKEDYA

    3G swap help

    With the orange/black hooked up also is that causing It to get warm? Also what do those wires go to?
  11. SMOKEDYA

    3G swap help

    I just installed my 3G tonight on my fox.I have a 91 SSP car,and after i installed my 3G and only running it for a few minutes (probably about 10 minutes max)the alt is warm.I ran the orange/black wires to the back of the alt and then ran a 4ga from the back of the alt (same as orange/black...
  12. SMOKEDYA

    West Coast Members of the Old School, check in!

    That will never happen OH yeah this place is dead for NW section,views yes but posts no. SS still rules.....we just had a meet and a drive till 4 AM friday night on SS,what did stangnet have? peace john:p
  13. SMOKEDYA

    8.8 rebuild

    Thanks for your input,but i think you missunderstood me. Thanks.So are you saying i will need to reset the backlash and so forth once i install extra discs? Thanks nik :nice: peace john:p
  14. SMOKEDYA

    8.8 rebuild

    Going to rebuild the possi in my 8.8.As long as i keep the shims on the correct side when i take it out and then reinstall them in the same spot,i should be ok correct?Also whats the ticket to making the possi tighter?I had my old one done at a shop and if i remember correctly they installed...
  15. SMOKEDYA

    Hot wire help

    :nice: just making sure peace john:p
  16. SMOKEDYA

    Hot wire help

    I'm asking this cause i'm installing a fast XFI stand alone and they want me to wire a single wire off the fast dizzy to a wire thats hot all the time when the ignition is on as well as when your cranking it.It would be safe to say i could use the Red/green wire? peace john:p
  17. SMOKEDYA

    Auto trans question

    If i'm reading correctly i want to stay around 160-170 degrees and not go no more then 190 for strip use?I have the controller for the trans also.ANother thing, my cooler is stock (as far as i know) and it also routes threww the radiator..Should i get an aftermarket cooler instead of the stock...
  18. SMOKEDYA

    AHAHAHAHAHAH Subframe Connectors @ $349.99??

    Why are threw floor SFC more them normal ones? The SFC's i welded in the guy got a steal then! I did his for $50. peace john:p
  19. SMOKEDYA

    Hot wire help

    On a fox body,I need a wire that is hot at all times ONLY when the ignition is on BUT is ALSO hot when cranking....peace john:p