Search results

  1. 68GEETEE

    HELPPPP!!!!! Power brake booster on a 67 .HELP ! Cant stopppp!!!!

    San Antonio Brake and Clutch, San Antonio Texas
  2. 68GEETEE

    Got my headers finally.

    I would have thought the drivers side is harder to fit. I think it will be on mine as I have both power steering and manual trans to contend with. Glad you got yours done. What size exhaust will you be running to the rear?
  3. 68GEETEE

    Power Valve on the Holley

    not sure if this helps but........ http://community-2.webtv.net/MATTGRU/HolleyPowerValve/
  4. 68GEETEE

    Argh this is getting old... more ping problems...

    What is your total advance at 3500 rpm with the vacuum advance? IF you are over 40btdc, you are most likely gonna detonate, even with 91 octane. You may need to get the timing under 40 total advance to get rid of the ping.
  5. 68GEETEE

    69 Doors needed

    try www.car-part.com
  6. 68GEETEE

    Suprises under the valve covers - 4v windsor heads?? (links to pics)

    They came on the 4bbl carb equipped engines. My '68 has them.
  7. 68GEETEE

    Part stores in McAllen or Laredo,TX

    Full Service Auto Parts in San Antonio handles Motorcraft and should have the plugs in stock. If not, try the local Ford Dealer in your area.
  8. 68GEETEE

    289 oil pump shaft

    Best way is to drop the pan and retrieve your parts, then install them before you put the pan back on. . A month ago this happened to me, and I left the pan off..............glad I did because I dropped the oil pump shaft again!! Good luck!
  9. 68GEETEE

    Decoding the DSO Code

    http://www.mustangdecoder.com/cgi-bin/decoder.pl
  10. 68GEETEE

    my 65's suspention

    I am wondering if your leaf spring is broken, or maybe a shackle is loose.
  11. 68GEETEE

    centerlink Question

    Mustang Mania in Houston 1-888-302-3703 or try www.car-part.com
  12. 68GEETEE

    Rearend

    If no one has swapped out the original rear end, then you would have a 8". . 9" rear usually was only found on the V8 Kcode 289 equipped Mustangs.
  13. 68GEETEE

    Timing Question

    Idle timing is usually somwhere from 10-16 btdc. Total advance at full throttle should be around 38. I would think your engine is going to ping like crazy if you have it set at 25 at idle. http://www.gofastforless.com/ignition/advance.htm
  14. 68GEETEE

    Took out plugs and ran compression test... have some questions

    http://www.mityvac.com/compression.html http://www.geocities.com/dsmgrrrl/FAQs/leakdown.htm I think your leak is valve guides and seals. I agree with D Hearne about the pinging, I think you need to see how much total timing advance you have, I have a feeling you are over 40btdc...
  15. 68GEETEE

    where can you buy rear shock plates???

    www.car-part.com
  16. 68GEETEE

    Tooks pics of my 64.5 with my parents 67 convert

    Nice Stangs!
  17. 68GEETEE

    Igniton question

    maybe some of your plugs arent firing due to oil fouling? Did you check to see if spark is jumping out of the wire when you pull it off the plug?
  18. 68GEETEE

    need help with sway bar link kit

    I have a '68 Mustang with a 1" sway bar. I just got a link kit with the poly bushings and I noticed that the new inner sleeve / spacer is about an inch longer than the spacer currently on the vehicle. The bolt in the new kit is also longer than what I have now. So do I use the new...
  19. 68GEETEE

    My 69 won't start when it's hot

    Several things: Your starter may be breaking down from the hot exhaust pipe and hot engine, try replacing it. Also check your cables, My starter cable got too close to the engine block and was breaking down when hot. A hot cable doesnt conduct very well. Also check your fuel line, it...
  20. 68GEETEE

    Need advice on purchasing 65 GT Fastback

    A big plus is that you are familiar with the car, and you probably will want to undo some of the stuff he did, but either way, 6K for a fastback that needs work but is in driving condition is about right.
Top Bottom
Back
Forums
Menu