Search results

  1. M

    Center dash removal

    Check this link: it sounds like a cluster****: need help!!! removal questions - WWW.S197FORUM.COM
  2. M

    cabin air filter

    Just adding a note for this how to thread on replacing the cabin air filter since I just did mine. The two screws did not release when unscrewed so I had to pinch the plastic pins together to remove them. For the one behind the battery I used some needle nose pliers. Also, the pin that fits at...
  3. M

    Did your handling suffer from 20 inch rims?

    Well, the OEM 17 x 8 wheel is 21 lbs. and I think the tire is somewhere around 27 lbs. Let me know if you find 20's anywhere near that weight. For instance, I like the Steeda Spyder wheels in 20 x 9.5 chrome, but they are 30 lbs. each.
  4. M

    Aluminum Driveshaft and Cold Air Intake

    Here is some info if you get a bad shaft...no pun intended: Choosing a one piece driveshaft and troubleshooting vibrations - WWW.S197FORUM.COM
  5. M

    Aluminum Driveshaft and Cold Air Intake

    Also , do a search on other forums and you will find more problems with aluminum drive shafts vibrating than you can shake a stick at.
  6. M

    Getting an annoying vibration from the center console

    Here is the whole list: S197 Ford Mustang Technical Service Bulletins - Ford Mustang | StangNet.com 06-4-1 is the one you are looking for.
  7. M

    Getting an annoying vibration from the center console

    There is a TSB on this problem, but I don't remember the cause or fix. Try searching the sticky for TSB's.
  8. M

    09 shelby gt-500

    My local rapist..err dealer, is selling one for $102,000.:(
  9. M

    Stock GT Fog Light wiring to run aftermarket fogs

    No, but with the Roush front fascia, they supply a plug-in pigtail for extra lights. You might call them and ask if you can buy it separate.
  10. M

    Chin Spoiler help needed

    lets see it painted! Aggressive or classic?
  11. M

    Your answers to Higher Octane Gas

    :nonono: Think of the poor moths that gave their manhood up.
  12. M

    Roush blower price reduced

    Yes, nothing wrong with the centrifugals especially cost-wise, but I'm looking for low end grunt and street fun. Racing will be few and far between. I can't tell from their site but it appears to be non-intercooled and these engines already create alot of heat so that is a concern.
  13. M

    Roush blower price reduced

    Roush just knocked off over $900 off their standard M90 blower; now only 4999! Anyone have this blower and opinions? I know there are more powerful units but it seems like a good deal to get to 435 h.p. safely with warranty intact. Any dyno graphs from those that have used them? Thx.
  14. M

    New to this board

    Welcome, an wow, serious mods going on there. What is up with the front fascia, spolier, lower grill area? Is that a CDC agressive chin spoiler with the lower grill removed?
  15. M

    aluminum d.s vibration?

    Mr Q: have a link to someone that makes a carbon fiber d.s.? Spydershaft is one of the many people have had problems with, even after adjusting the pinion angle,( only seems to be a high speed problem for the most part). Seems the d.s is just too long on these cars; probably why Ford used the 2...
  16. M

    aluminum d.s vibration?

    I have read in other forums that everyone with a one piece aluminum drive shaft has a vibration problem between 80 and 120 m.p.h. Anybody here with the problem/solutions/vendor recommendations?
  17. M

    My New Baby

    Lower it and put a hawt girl in the passenger seat.
  18. M

    Thinking About Joining The 3V World! Opinions Wanted

    Oops, one more negative than positive, so I'll fix now: They are fun as hell to drive, look cool, and have a million aftermarket parts for interior, exterior, engine, suspension, brakes,......... Add a blower and you can go from a safe 400 h.p to 800 h.p depending on how brave you are. Oh...
  19. M

    Thinking About Joining The 3V World! Opinions Wanted

    I have different opinions than some, but here are my pro's and cons: I have an 08 which has: 1) upgraded heads so the spark plugs don't break when you try to change them. 2) better weatherstripping that won't scratch tint if you decide to install it. 3)Shaker 500 is the only factory unit I...
  20. M

    WOW IM MAD!!!!!!

    Yes, chips behind the fender flare from road debris is almost impossible, but Ford managed to accomplish this feat with their thin-arse paint. Actually, I thinkl the problem is a very soft clear coat, but the paint has to be very thin also to allow that type of damage.:notnice: on paint...
Top Bottom
Back
Forums
Menu