Search results

  1. AnthonyR23

    Computer Pin Out for A9L

    It's been awhile since I have posted on here, it has been a few years since I put a new 347 rebuild in my car and haven't had it running right ever since, I changed so many things including mass air conversion, so it is difficult to narrow down what the problem is, I have had it running at...
  2. AnthonyR23

    Somewhere to take for tune?

    Hey, so I have been trying to get my mustang tuned up.. the issue I have is that.. it can sometimes run too lean, then too rich.. but I don't want to waste money putting on the road.. and I can't really drive unlicensed up and down the street.. until I know it is running smooth, I don't know...
  3. AnthonyR23

    Accufab TB Question - TB to Oil Neck Filler?

    okay so if I drill a hole in the side of my anderson pipe, and have a line running to my oil filler neck, are you saying I should have a pcv valve there? Is it supposed to be fresh air from the intake going into the filler neck or other way around, the intake pulling air or vapour from the...
  4. AnthonyR23

    Accufab TB Question - TB to Oil Neck Filler?

    Is there any other option, like leaving it open to fresh air, or putting a breather cap on.
  5. AnthonyR23

    Accufab TB Question - TB to Oil Neck Filler?

    Please if someone could help that would be great! :shrug:
  6. AnthonyR23

    Please help! Anyone! MSD Installation question.

    Hi, I got a pro msd distributor part 8579 as well as a 6a ignition box and a new blaster coil 8227. I had to order a new steel gear cause this one came with a cast gear. Just a little confused about the lack of tfi module, but have to admit I'm not positive about this upgrade and what I'm...
  7. AnthonyR23

    Accufab TB Question - TB to Oil Neck Filler?

    Hey, I am still running EGR and emissions components.. on my new accufab tb there is no vacuum stem that has the hose that runs to the oil filler neck like the original throttle body. One suggestion was that I just put a vacuum stem on my anderson ford power pipe right before the throttle body...
  8. AnthonyR23

    Desired AFR tuning question - moates quarterhorse

    Never mind.. found in bin editor.. if you click settings at the top, then click fuel settings you can change your desired afr, and still leave the fuel type to gasoline. So that works. Sweet!
  9. AnthonyR23

    Desired AFR tuning question - moates quarterhorse

    Hi, just wondering if anyone that uses tuning software with bin editor has changed the A/F ratio scaler from gasoline to say e30 since e30's target afr is 12.92 rather than the 14.64 for gasoline. or even 340.. which I think would be around 12.4 ish. not positive though. I have a...
  10. AnthonyR23

    PCV System Question - Oil Filler - Vacuum Line.

    Hey so I bought a race version throttle body that does not have the line off the side that hooks up to the side of the oil filler tube. I am still running EGR valve and emission controls.. just wondering if this line that usually goes into the intake track can just be hooked up to any vacuum...
  11. AnthonyR23

    Intermittent Spark - Coil to Distributor

    Sry about last post, just really frustrated.. gonna take a break from it for a few weeks, hopefully I can return some of these parts, as the old ones are probably fine.... I actually used to like working on my mustang, making changes and noticing the difference, but since this new engine, I...
  12. AnthonyR23

    Intermittent Spark - Coil to Distributor

    So today, I stopped at part source, picked up a pickup/ pip/ hall effect or whatever it's called.. pulled the distributor, took it apart, including pulling the gear, and spacer thing. Put it all back together. cranked engine to 10 degrees, pulled a plug to make sure air was coming out.. and it...
  13. AnthonyR23

    Intermittent Spark - Coil to Distributor

    same problem with spout removed.. so does that pretty much point to the pip sensor.. and anyone know what type of things you would experience while driving if the pip sensor was on its way out? Cause had some stalling and rich conditions, I guess if all cylinders weren't firing that would do it.
  14. AnthonyR23

    Intermittent Spark - Coil to Distributor

    ???
  15. AnthonyR23

    Intermittent Spark - Coil to Distributor

    Okay.. well I didn't know that.. so that helps.. So I know that, throwing money at it isn't always the best, but I'm not sure what else it could be, if the cap and rotor, wires, plugs are good, tfi module is good, as well as the coil. So I guess, since I have gone this far, a re-manufactured...
  16. AnthonyR23

    Intermittent Spark - Coil to Distributor

    So should I be referring to the no spark list... number 2 on the checklist? I am getting spark but not consistent from coil to distributor with timing light, and the coil is good, old one probably was too, wasted money on this part. Was hoping it would fix the problem. But same thing. Shouldn't...
  17. AnthonyR23

    Intermittent Spark - Coil to Distributor

    I agree it is probably very useful for most situations. but I think my situation could be slightly different. So following the checklist.. step one is to check for a bright fat blue spark. I replaced my cap and rotor, wires are new, I just replaced the tfi module and ignition coil. So I...
  18. AnthonyR23

    Intermittent Spark - Coil to Distributor

    So, I didn't get this message till I got home, I picked up a new coil from canadian tire and just installed it, tried to start it and same thing. Probably shouldn't just throw money at it. I am getting pretty frustrated. Would failed pip cause the intermittent spark? It's rainy and crappy out...
  19. AnthonyR23

    Intermittent Spark - Coil to Distributor

    Still Can't Start... Checked engine off trouble codes... 21 - ECT out of range 24 - IAT out of range 81 - AIRD 82 - AIRD 96 - Fuel pump circuit monitor 24 seems like a new one, from what I remember... not sure what that is?
  20. AnthonyR23

    Intermittent Spark - Coil to Distributor

    Hi, so I replaced some parts over the winter, including accufab tb, powerpipe, and pmas meter. I was having issues in the late summer last year with the car stalling when hot. So I assumed it was the TFI module, and replaced that aswell as the parts above. Cranks but doesn't start. I...
Top Bottom
Back
Forums
Menu