Search results

  1. a885.0

    Holy $45,000 fox batman

    bentley429 i saw that sn95 at the miller race car show sounded real nasty, and like you said he doesnt open the hood at all.
  2. a885.0

    speed density cams

    check my sig the first combo was with speed density and a crower cam. Made pretty good power for bone stock heads.
  3. a885.0

    Those with C&L MAF...opinions wanted.

    I also have a c&l 76mm with the mods in my sig and no problems here
  4. a885.0

    installed coil overs have a ?

    they are adjusted now to about stock ride height i will go alittle more and see what happens.
  5. a885.0

    installed coil overs have a ?

    I installed a set of granatelli drag coil overs along with lakewood 90/10 struts everything is fine except when i hit a bump in the road, the coil overs make a clicking noise. I was wondering if any of you have ran across this and have any solutions. I called granatelli and they told me there...
  6. a885.0

    header steering shaft clearance

    my brother had to get the flaming river low profile steering shaft when he put the bbk 13/4" long tubes on clears just fine now.
  7. a885.0

    Year and Mileage

    88 notch with about 82,000
  8. a885.0

    horsepower gains with cam and intake

    I made 244rwhp and 291rwtq with bolt ons a crower cam and edelbrock intake check my sig. for the list.
  9. a885.0

    FRPP 347

    Deff. subframes my brother's car didnt have them when we put the motor in and with full drag suspension the car would twist like crazy getting on it in first and second gear. He is also running draglites with MT E/T streets so it hooks up pretty good. For the suspension it is his choice, it...
  10. a885.0

    FRPP 347

    we just put one in my brothers 84GT nice engine for the price, the car made 382rwhp and 353rwtq and it runs pretty damn strong, this is with a mighty demon 750 card, 13/4 headers,mac 3" pro-chamber,and mac 3"pro dumps also a 5 speed with 4.10s. We got an awsome deal on it from one of the local...
  11. a885.0

    caster/camber plates

    Thanks alot guys iam goin to call up MM today :nice:
  12. a885.0

    caster/camber plates

    I just switched over to a front coil-over set up and was wondering which aftermarket caster/camber plates i should go with, i also read that i should go with a 4 bolt style instead of a 3 but i dont see many 4 bolt ones at all. Thanks
  13. a885.0

    Who's making 400+ rwhp with a blower? Fuel system questions

    your currant fuel system is deff. enough for your power,it will support up to about 500rwhp
  14. a885.0

    C&L or Pro-M

    i have a c&l 76mm no problems here, but if i ever upgrade iam goin to go with a sct meter
  15. a885.0

    ARP Head bolt part #

    those heads are drilled for 1/2 studs and the 302 block is 7/16 thread so you have to get 7/16 studs and use a bushing that goes in the head iam not sure of the part number, i would just call AFR they are pretty good there and will give you a part #
  16. a885.0

    speed density cam?

    i have the crower 15511 cam with speed density and the mods in my sig. i have bone stock heads and i put down 244 horse and 291 torque at the wheels and the car runs awsome i am also doin afr 165 cc heads and 24# injectors this winter, i think this cam is smog legal too. Adam
  17. a885.0

    New 86 GT Speed Density What CAN\CANT Do

    Iam also trying to stay with SD for as long as i can i did all the mods in the sig along with a crower cam that works awsome with SD, i didnt have the money for heads at the time i did the cam but this winter iam goin to buy AFR 165's with the 58 cc chambers and hopefully make around 300 at the...
  18. a885.0

    Powertrax lock right posi/diff/locker

    i just put one in my car with 31 spline moser axels it is a good deal and you dont have to take out the ring gear you could finish the installation in one night
  19. a885.0

    Daily driver with a spool?

    i just put in a powertrax locker with 31 spline moser axels and it is very streetable you might want to look into one of these i got mine from mustangs unlimited for $430
  20. a885.0

    canfield head question

    The cam i have is pretty mild it has 218 224 duration at .50 lift, how would i measure the piston to valve clearance??
View older results
Top Bottom
Back
Forums
Menu