Search results

  1. B

    is it normal?

    The guy I bought the heads from said he replaced the springs when he had the heads worked and he was running an E cam
  2. B

    is it normal?

    I have checked my timing with a timing light and withe the lead on number 1 wire I show to be 14degrees advance but My idle didn't seem to go up when I moved the dist.
  3. B

    is it normal?

    I set each piston at TDC and tightened the rockers down, got the onfi from the crane website
  4. B

    is it normal?

    Yeah it just dies and and like I am at red line
  5. B

    is it normal?

    After my head and tfs1 swap i am on rev limiter at 5200-5300 rpm??
  6. B

    Intake cracked

    thanks now just got to find a reputable shop in my area
  7. B

    Intake cracked

    I broke the front ear off my explorer intake when I was putting my engine back together last month and I put a band-aid on it and repaired it with JB Weld but noticed the other day that it looks to be starting to crack. Has anyone ever tried the aluminum welding rods that you use with a torch...
  8. B

    MAC vs. PYPES

    How much difference between shorties and LT
  9. B

    MAC vs. PYPES

    Looking at unequal lenth shorties, would 1 be better than the other?
  10. B

    Will these seats fit?

    they should I am running the front and rear seats out of a 2000 in my vert
  11. B

    Injectors

    yeah I was looking and the 255 is at most $20 more than the 190, so def going to get a 255 and some 24lb injectors and would I need to go ahead and install an adjustable fpr when I put in the fp and inj or would my factory do until I add Nitrous? How rich will I run with the 24lb injectors with...
  12. B

    anyone runnin ebay rotors ur stang?

    I am running ebay rotors on my car since spring and no problems what so ever
  13. B

    Injectors

    Also debating just do the fuel mods and then save for a tweecer r/t. I do have a small crack on my drivers side header, how much will this effect my performance
  14. B

    Injectors

    could my gas mileage be associated with taking the smog and egr off? The tune i was looking at was only going to cost me about $350. $269 for the sct 4 bank and then $75 for dyno pulls to see what my a/f ratio is for each burn and then they will rebrun the chip for free, just cost me $5 to ship...
  15. B

    Injectors

    What size fuel pump should I go with? I was looking at 155 or 190lph. Basically, I have 300bux to spend should I go for 24lbs and a 155lph, adjustable fpr and possibly a cobra maf since it is cal'ed for 24lb... or Go ahead and get my car tuned for the cam and set-up I have now and...
  16. B

    Injectors

    i think i am going to get some 24lbs before i get a sct chip, can they manipulate my factory maf for the 24lbs with a chip?
  17. B

    Injectors

    How about if I added a 75shot
  18. B

    Injectors

    With my set up are my 19lb injectors sufficient? Explorer Intake BBK 75MM TB Trick Flow Elbow ported & polished E7 heads bbk shorties crane 1.6 rr TFS1 Cam