Search results

  1. pumm3l

    Vibration around 1400 rpms

    thanks but i just called advanced they don't even carry the part in store you gotta order it online.
  2. pumm3l

    Vibration around 1400 rpms

    damnit anyone know where I can get the clutch disc alignment tool before the weekend? Autozone, pep boys, and advanced auto parts don't carry it. I know summit and partsamerica.com do but I doubt they can get it here before the weekend, I got the dowels and wanna try to get them in before the...
  3. pumm3l

    Vibration around 1400 rpms

    nope no burning clutch here, and that king cobra clutch really stinks so you'd definitly know heh.
  4. pumm3l

    Vibration around 1400 rpms

    yup I torqued the clutch/flywheel to spec and as for the pressure plate bolts, I tightened them all evenly starting with the top and moving to the next in a circular motion like the instrucions stated, then I torqued those as well. that's an interesting point with the harmonic balancer I...
  5. pumm3l

    Vibration around 1400 rpms

    Yes that's the one. I'm aware they won't work with the 11" which doesn't apply in this case because even though I'm using a 2002 engine I'm still using my t45 tranny which uses the 10.5" clutch.
  6. pumm3l

    Vibration around 1400 rpms

    He's thinking the clutch had the imblanace? is that your stock flywheel that they shaved a bit off? I'm ordering those alignment dowels and I'll try to throw those on, if that don't work I'm going to order a new flywheel and see what happens from there. Hopefully I don't need a new clutch...
  7. pumm3l

    Vibration around 1400 rpms

    I'm positive the alignment dowels on the block for the bellhousing were there. I'm goning to take everything apart this following weekend and take a look, that clutch alignment tool makes much more sense the way it was designed when you describe how to actually use it heh. After you use the...
  8. pumm3l

    Vibration around 1400 rpms

    I'm using an excedy racing flywheel: http://cgi.ebay.com/ebaymotors/EXEDY-RACING-FLYWHEEL-96-04-MUSTANG-COBRA-4-6L-6-BOLT_W0QQcmdZViewItemQQcategoryZ33732QQihZ019QQitemZ8071407038QQrdZ1QQsspagenameZWDVW That's the exact one I have. I definitly torqued the flywheel bolts and in the circular...
  9. pumm3l

    Vibration around 1400 rpms

    I feel this vibration in neutural as well so that should rule out that, I keep leaning towards the flywheel/clutch but I'm trying to do more simple things first before I try to remove my trans on my back with little to no room heh. What kind of place would be able to check my pressure plate &...
  10. pumm3l

    Vibration around 1400 rpms

    well I finally got around to changing all the mounts (left, right, trans) and the damn vibration is still there. If anyone has any other ideas to help me out I'd appreciate it.
  11. pumm3l

    Vibration around 1400 rpms

    somone suggested that it's probably the trans mount here's the link: https://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=213914&chapter=DP2FW0&appSectionid=10&groupid=10039&subgroupid=61465&make=10&model=Mustang&year=2002&catalogid=1 It threw me off because it says...
  12. pumm3l

    Vibration around 1400 rpms

    OK I think I figured it out. After I pulled the inspection cover and everything seemed fine, my grandfather suggested that we check the motor mounts so he had me get in the car hold the brake pedal while putting the car into gear, the left side seemed okay but when we put it in reverse and...
  13. pumm3l

    Vibration around 1400 rpms

    well I've done a bunch of testing since I last posted. I pulled the harmonic balancer off and started the car without it on and I could still feel the vibration so I think that rules that out. Nothing seems to be wobbling anywhere that I can see anyway, I pulled all the plugs, they...
  14. pumm3l

    Philly SCT Tuners

    gave a call to both companies today, L&M does tune they were a bit expensive though, JDs I've heard good things about on some local forums. The only reason I'm leaning towards SCT rather then diablo is I like the 4 bank chip that allows you to change your tune on the fly does diablo have a...
  15. pumm3l

    Philly SCT Tuners

    I'm about to get a SCT chip and a dyno tune and I looked up some dealers in my area and the 2 that came up were: JD's Performance Center L & M Engines Inc Anyone have any expierence with either of these 2 companies? I've bought some nitrous refills from L&M but I don't know their...
  16. pumm3l

    Vibration around 1400 rpms

    yes actually I did, I actually had to remove the entire front cover of the engine because I did an explorer swap and had to use a tbird cover so I'll check that out today to see if I can see anything unusual under the hood.
  17. pumm3l

    Vibration around 1400 rpms

    did a swap about nov of last year while I was at it I put in a new clutch & flywheel after everything was done I now have a slight vibration at 1400 RPMs only, did a little searching some are saying that the pressure plate and clutch could be out of balance as a set, anything else I can start...
  18. pumm3l

    Installed my painted chin *pics*

    Well thinking about it the chin spoiler IS plastic and somewhat flexible, I wonder if theres a certain method to installing it like maybe you first install the both sides flush with the wheel well then pull it forward and stretch it as much as you can so that when you drill the holes it's flush...
  19. pumm3l

    Flywheel

    I wasn't planning on getting a cobra flywheel at all. I'm getting the King Cobra clutch with either of the 2 flywheels listed in my post.
  20. pumm3l

    Flywheel

    spun a bearing in my 99 GT so I bought an 02 alumuinum PI engine, and I need a 6 bolt flywheel so figured might as well change everything out since this clutch has about 60k miles on it and I have to go in there anyway. I decided to go with a king cobra clutch setup but I'm torn between 2...
Top Bottom
Back
Forums
Menu