Search results

  1. 194stang

    broke t-5 and new l/t

    well month ago broke the t-5, finally got around to gettin one, (if any one needs a rebuilt one I got the guy to do it. got mine for 550 + my old tranny,shipped to my door. tranny was perfect including steel retainer.) anyway, was puttin it together today and got to the exhaust and couldnt force...
  2. 194stang

    The fastest you have had your car

    radared by a deputy buddy at 147....dont recomend it though, it gets a little lite at that speed
  3. 194stang

    SN95 Wheel Bearing Replacement. How hard?

    thats about it, youll have to pull the rotor and caliper, then get ready, that big nut is tight--like 200-300 ft lbs, (dont remember the exact figure) then pop the new one on and tourque it down. Good luck!
  4. 194stang

    Is it time for a rebuild?

    I would look into changing the valve seals, its fairly cheap and not too hard to do. good luck
  5. 194stang

    aluminum heads

    wanting to replace my gt-40's with a economical(if there is such a thing) aluminum head. I dont want to start the AFR,edel, twisted wedge debate,just seems I remeber a lower priced aluminum head from Ford, just dont remeber where or which one it was. Like a Y or something.Not really concerned...
  6. 194stang

    brake rotor choices

    Looking for new rotors for the stang. Need some opinions: slotted? cross drilled? both? any comments welcome. need something reasonably priced too. :D
  7. 194stang

    ***Official Free Post Thread***

    :D :D unbeleivable, lots of good info gone :notnice:
  8. 194stang

    Questions regarding JMS & others pre-program chips.

    I got a chip from JMS....had the dreaded e-cam blues, weird idle-surge. They fixed all that and more. You can change the fan settings,eliminate egr codes just about anything you want. Give them a call and talk to them. was worth the money to me . Only thing is if you change your set-up, it may...
  9. 194stang

    Base RPM for E303 Cam?

    mine idles the best around 850, but i have a custom chip setting the idle there.
  10. 194stang

    Pre-Paid Power

    if you are looking for a chip to order, then JMS is tough to beat. They will want to know: cam,heads,intake,throttle body, maf,injectors,weight,tranny,rear end ratio,where you want the fan to turn on, any drivability problems,the number of your computer and probably a couple other things I dont...
  11. 194stang

    Does anyone know what RTV stands for?

    room temperture vulcanizing
  12. 194stang

    Need pics of aftermarket tachs

    i dont have a pic handy, but i mounted it wherew the clock pod was.....fabbed up a bracket to bolt it down....that way the holes will be covered by the clock if i remove the tach
  13. 194stang

    Winter storage

    I am going to be putting the stang up for the winter soon and wanted some suggestions on the best way to store her. Planing on putting it under a carport with a car cover....any ideas on the battery, gas ect.? Thanks!
  14. 194stang

    Anyone have recommendations for a new distributor.

    I got the MSD pro-billet one....real nice unit, but they are a little more $$$.As far as a part number....I would call like summit or jegs and make sure you get the right one for our cars....I ordered one from the catalog guide and it came as one for a fox body, the rep said they would get the...
  15. 194stang

    new EEC for E303

    I have pretty much the same setup and I had some idle and surge issues with the e-cam.....some do some dont,pretty hit and miss with our puters....however to be safe I would plan on a chip,tuner or a dyno tune. I got a custom chip from JMS and it cured the problems, plus you can get things like...
  16. 194stang

    rear main

    i dont think you could do that in a hour and a half....the tranny has to come out.bellhousing,clutch, flywheel, the oil pan has to be droped.... when i replaced mine,i just went ahead and pulled the motor, wasnt that much more work
  17. 194stang

    My 95 loves oil :(

    if i were guessing i would point a finger at the valve seals......i had that prob once and the replacing the seals cured it.....if nothing else changing them is a cheap deal if you have the know how. good luck
  18. 194stang

    *Need Idle Help* please

    problem is probably the e-303.....some guyys get a decent idle but most dont......get a tune or a chip from JMS....they fixed all my drivability issues with the e-303.
  19. 194stang

    Sorry, but need a stock cd player...

    eaby.....guy on there goes by mach460 (or something like that).....usually has stock stuff....
  20. 194stang

    What Do You Guys Think?

    it also says it is a hyd. FLAT tappet, ie. non roller.....are you sure you dont want a roller?
Top Bottom
Back
Forums
Menu