Search results

  1. Daniel50

    blower setup

    well i decided to put a supercharger on my car so it will be quick while i build a 347 longblock up. i want the loudest supercharger they make. what is it? i going with a used kit to save money. looking for a vortech s trim or a trim. only going to run 9lbs max on my stock motor.
  2. Daniel50

    H/C/I

    you could upgrade to 24's and get a 75mm pro-m or granteli to use. but if you dont want to spend the money you can get away with the 19's still. if you plan on going nitrous like it says in your plans your going to want to upgrade for sure. with that combo w/out nitrous i would expect 250 rwhp...
  3. Daniel50

    3.73's wow! whats next?!

    oh yeah i didnt have the bfg drag radials either lol.
  4. Daniel50

    3.73's wow! whats next?!

    to clear a few things up i already have underdrive pulleys. and the car was a cobalt ss with longtube header, no cat, borla catback, cai, stage 2 (4 more pounds of boost, and computer). it went 14.2@99 at the track. lol all those mods for that time
  5. Daniel50

    3.73's wow! whats next?!

    well just had my first race with my 3.73's and lets just say i lost by 2 cars before and i wont by about 4 cars now to the same car haha. im pumped now. what will give me the next best bang for the buck?! excluding nitrous since i have a kit that i will use later on
  6. Daniel50

    3.73 gear break in

    sweet if i didnt drive around daily on bfg drag radials i would love to feel the difference from a 2500 rpm punch in 1st haha. but just grips and goes with no spinnage
  7. Daniel50

    3.73 gear break in

    i just got my 3.73 gears installed, trac loc rebuilt, and new bearings. i drove 20 miles and let rest for 30 mins. then drove 20 miles and let rest for 30 mins. drove 25 miles and let rest for 40 mins. then drove 30 miles and let rest for 45 mins. and finally drove 30 more miles and let rest for...
  8. Daniel50

    Your tire combo on 17x9 rims

    i got 275/40/17 eagle f1's up fron and bfg 275/40/17' drag radials out back
  9. Daniel50

    dyno numbers for a semi stocker.

    im guessing the second one is most accurate. through an aode and 190,000 miles 163k seems a little low but more accurate than the 204hp. since your only power mods is pulleys really. i would take it to a dynojet so you can get numbers that compare with everyone else's
  10. Daniel50

    h/c/i gasket set

    anyone?
  11. Daniel50

    h/c/i gasket set

    doing h/c/i swap and need to know if there is a kit with all the gaskets i need in it? trickflow has some sets on summit but either they have some of the gaskets or way to many. or can someone give me a list of ALL gaskets i will need. thanks for the help guys
  12. Daniel50

    custom cam spec

    i got the information i needed. the cam will work fine with my setup's its a custom cam made by a shop close to me.
  13. Daniel50

    custom cam spec

    buying a custom cam for my holley systemax II heads. and performer intake. do these specs sound good for this setup? Intake/Exhaust: 544 lift 224 Duration i looked it up and almost idenitcal to the x cam just a tiny bit more lift. can i use my stock pistons with these?
  14. Daniel50

    hp estimate

    in your guys opionion is this combo good for 315 rwhp? -Ported Holley Systemax II Heads -Elgin Custom Cam -Ported Performer RPM Intake -1.6 rockers -Mac Longtbues -O/R X-pipe -Mac Catback -BBK CAI -Pro-m 75MM Mass Air -BBK 70mm throttle body -Mac underdrive pulleys
  15. Daniel50

    900 dollars is it worth it

    they are the systemax heads. i figure if i can get the holley manifold for 300 used and buy new everything else. i would but they complete h/c/i package for about 1500 instead of spenind about 2400 on buy buying the kit new and adding the lifters. so thats an extra 900 i can but to a new shortblock
  16. Daniel50

    900 dollars is it worth it

    i want to do a h/c/i and this guy i know is sellin a set of holley heads with really low miles, a set of 1.6 rockers, and a custom grind cam that matched this setup. is it worth 900 dollars? then i just would need some gaskets, lifters, timing chain, intake manifold, and pushrods and id be set!
  17. Daniel50

    another Hp ?

    i guessing between 220-230 to the wheels.
  18. Daniel50

    Rate my crate (347ci) HP

    400 at the motor through an aode comes down to roughly 315 to the wheels. and on high side i say it makes 340 to the wheels. all that motor needs is a little boost and you will be good to go!or even a 75 shot and you will be well into the 11's....
  19. Daniel50

    Need your opinion on a shortblock upgrade

    isnt the 331 only like an extra 500 dollars?
  20. Daniel50

    Buying a 95 gt with mods, need help

    maybe he meant 400hp to the crank? that would roughly come down to about 330-340 to the wheels. which is more believable. if it has the a4 block i say jump on it. with that motor all you need is a big blower or turbo and you will be set!
Top Bottom
Back
Forums
Menu