Search results

  1. 98GTfromGA

    Pics of my KB Saleen

    I didn't get it at first, but that is pretty slick
  2. 98GTfromGA

    5.1L ready to go in car

    what he said
  3. 98GTfromGA

    Question about a 2.9 RR pulley

    I have a V-2 SQ-trim with a RR 2.7 6 rib. No belt slip with a 112" napa belt. And over 1,000 miles no sign of the belt deteriorating. Boost comes on hard in the midrange. I'm making 10lbs at 5000 rpm
  4. 98GTfromGA

    Mid pipe install.....seriously wtf

    PB Blaster ftw!
  5. 98GTfromGA

    Vortech supercharger questions if anyone can answer

    that bolt is pretty hard to turn, an impact might be your friend on this one
  6. 98GTfromGA

    vortech pulley

    If you want 10lbs at 6000 rpm you will probably need a 3.1" pulley
  7. 98GTfromGA

    Cams??

    i would say the Hitech stage 2s or the Comp 270s
  8. 98GTfromGA

    going to a blow thru setup

    I was going to recommend a 3" protube meter, or the pmas slot meter
  9. 98GTfromGA

    Anyone know this car?

    I want to know what kind of exhaust and cams he has. YouTube - My 4.6 Mustang GT with Cams (after i got it dyno tuned)
  10. 98GTfromGA

    HOLY CRAP, IT IS GREAT BEING BLOWN!

    Funny thing is I had 42s and sold them to get 60s. If I had the 97 rails with a regulator I would have been fine. Oh well, live and learn right.
  11. 98GTfromGA

    HOLY CRAP, IT IS GREAT BEING BLOWN!

    Well the first time we we had to stop the pull at 5700 because the car was going lean. The 60s were sucking all the fuel out of the rails and my fuel pressure started dropping. Car made 12.5psi and with 11 degrees of timing did 441 rwhp and 442 rwtq on a Mustang dyno. I have the bigger rails and...
  12. 98GTfromGA

    The end all be all cam thread.........

    No that's all I added however I did notice that the exhaust duration on the VT stg1 2v cams is not right, it should be 226 not 246
  13. 98GTfromGA

    HOLY CRAP, IT IS GREAT BEING BLOWN!

    WOW your setup is almost a mirror image of mine! Same coil packs too. I had my intake routed exactly like that but my hood would not close right so I changed it a little. Very nice, where did you get the 3" to 4" transition that is bolted to your maf? My BA2600 is pegging because its in a...
  14. 98GTfromGA

    Speedo/odometer faliure?

    The speedometer and odometer are driven by different gears. If they both stopped working its likely that it is an electrical issue and not a mechanical one. In my car the speedo works but the odometer and trip meter stopped working because the teeth on that gear are worn down. They sell the...
  15. 98GTfromGA

    The end all be all cam thread.........

    I added the new TFS 2v cams and Houston Performance cams
  16. 98GTfromGA

    Ebay/cxracing intercooler works very well

    Yeah here Almost done with intercooler install.... - ModularFords.com
  17. 98GTfromGA

    Ebay/cxracing intercooler works very well

    I have a V-2 SQ-trim with a Reichard Racing 2.8 ultragrip pulley. The intercooler is probably costing me about 3lbs of boost so the blower is probably making 15lbs.
  18. 98GTfromGA

    Vortech guys; I need help deciding on pulley size!

    255 intank, T-rex, 60s, stock fuel rails and regulator. He said if I had an adjustable regulator he could have jacked the fuel pressure up to 45 psi, it was only 38 or so and the 60s were sucking the rail dry.
  19. 98GTfromGA

    Vortech guys; I need help deciding on pulley size!

    We had to stop the run at 5700 because the car was going lean, boost was still climing though. When i get the fuel system situated we will rev it to 6500. It should make 15lbs then.
  20. 98GTfromGA

    Vortech guys; I need help deciding on pulley size!

    It depends on which blower you have as well. My sq trim made 12.5 lbs at 5700 yesterday. I have a 2.8" RR pulley 6 rib
Top Bottom
Back
Forums
Menu