Search results

  1. fastangboi

    EFI to Carb trade off

    alright ive got a buddy that has agreed to switch me his complete carb set up for my EFI. he has Edelbrock 600 carb Edelbrock RPM performer intake, 2"x14" K&N MSD 6 BTM w/ retard switch MSD distributor tank, pump, fuel lines for my 80mm cia under hood 76mm C&L maf 70mm t/b light...
  2. fastangboi

    one wire alternator?

    i did a 130a junk yard swap. i was looking for a taurus donor then ran across a police package fox. got the alt and wires for super cheap. stupid easy to hook up too
  3. fastangboi

    pin on hatch

    my fiberglass back with the lexan is SOOOO much lighter than stock stuff. i drove with nothing on the tail to see how it would hook while in the middle of the project. 1st useless, 2nd higher speed of no traction, 3rd doesnt stop spinning till about 5k rpm. now thats on a relitively stock 5.0...
  4. fastangboi

    pin on hatch

    Alright ive got a 89gt and a pin on style hatch with a Lexan window. Does anybody know how to set this up? like are there any write-ups hidden in any forum, im having a hard time running this info down. thanks guys:D
  5. fastangboi

    From EFI to carb'd on an 89

    Also why do i have to swap over ignition systems. I figured mine thats on my 89gt is more advanced than a duraspark set-up
  6. fastangboi

    351 swap ??

    ok there have been thousands of guys that have done this swap, but my question is... Were there any unexpected snags in the project that you didnt anticipate? I mean anything. Its my first time going form a 302 to a 351 and i want to be prepared and do it right. i anso dont know if my 302...
  7. fastangboi

    From EFI to carb'd on an 89

    they do it completely different than me. i was using a huge guage solder and getting the wire hot with a lighter and letting it drop onto what needed to be soldered. i usually strip the wire to the length of the width of me pinky nail, twist, then heat shrink. Never had any one of my jobs fail...
  8. fastangboi

    From EFI to carb'd on an 89

    i cant solder to save my life. it always ends up clumpy and brittle
  9. fastangboi

    From EFI to carb'd on an 89

    nice copy and paste, i already read that stuff. thanx though. . CARLP-i was planning on running steel tubing, like huge brake line style. Steel braided would be a little over the top. And i was planning on doing a little more talking to 5.0 guys to see if they had some nice parts collecting...
  10. fastangboi

    From EFI to carb'd on an 89

    Well under hood mods include 1"5/8 w/ 3" collector long tubes mild home port job on E7 heads(mostly port match and polish) E303 cam with 1.7 crane cam roller rockers refreshed block(new bearings and seals) underdriven, no A/C, no power steering, no smog Manual tranny, 3.55 gears . For budget i...
  11. fastangboi

    From EFI to carb'd on an 89

    what is the shopping list of parts to do the swap? Already i figured a 650 Carburator, inline fuel pump, GMS in tank pick-up, manifold, filter. What else? any vacuum conversion or ignition concerns?
  12. fastangboi

    Problems with BBK Fuel Pressure Regulator

    Yeah. my BBK FPR was fine for like the first month. I had it running dog rich and then i could back it off. but then no matter where i adjust it to the idle doesnt change and it wont richen up. Wierd
  13. fastangboi

    Exhaust leak at manifold, problem?

    This subject has come up like 50 times already. On the driver side it is the ball and socket style flange. There are two steel dowels that prevent over tightning, but on aftermarket pipes it makes it to where you cant tighten it down corectly.
  14. fastangboi

    4.6 to 5.4 swap

    what kind of advise do you need? All i know is that you need a lightning lower intake with a cobra(pre03)upper intake. i think you can use your stock headers but if you want to go aftermarket you have to stay with shortys. And you will need the H or X pipe costom fabed. . Do more research online
  15. fastangboi

    got 600 bucks to blow, what to buy

    yeah, just about to say that. either a Diablo or SCT
  16. fastangboi

    Scary noise on startup.

    check your oil level
  17. fastangboi

    what is this??? its ripped off!!

    get a closer pic. that would be helpful
  18. fastangboi

    cylinder 4 location...

    4 is at the wall on the pass. side
  19. fastangboi

    O2 simulators

    i would think they should
  20. fastangboi

    spark plugs

    5 and 8 usually foul on the 4.6
Top Bottom
Back
Forums
Menu