Search results

  1. faststang90

    after market steering wheel question

    it says that it is for a 673 WHEELS which is a 3 bolt mount but the steering wheel has the 5 bolts on the outer part of the mount. Grant Products 673 - Grant Racing Performance GT Wheels - Overview - SummitRacing.com
  2. faststang90

    after market steering wheel question

    no problem hope it was what u need. it was passed to me when i asked
  3. faststang90

    after market steering wheel question

    check with them STEERING WHEEL INSTALLATION KIT 84-93 FORD - HOLCOMB MOTORSPORTS INC
  4. faststang90

    Need to replace fog lights, won't pass inspection

    hmm
  5. faststang90

    Is the coupe/convo saleen wing the same as gt/hatch?

    the one for the coupe and conv bolts to the car different than the hb. the hb is wider
  6. faststang90

    Clunk in steering

    sounds like a rag joint http://www.latemodelrestoration.com/item/DOR-31000/79-93-Mustang-Steering-Shaft-Rag-Joint
  7. faststang90

    Post your favorite pic of your car.

    this was mine. it was a 1993 coupe i was doing a bbf 572 cu with a 101 mm turbo. i had a guy hit me on my bike and it stopped the build of it because the money stopped coming in.
  8. faststang90

    Engine Hoist

    we buy things from Harbor Freight and we get about a 50/50 chance that it works all the time. i have one like that and it works good to get the motor out easy
  9. faststang90

    4.6 3v for a 2005-up

    This motor and tranny have less then 200 miles on either. I went ALL out on my new set up so this will make a perfect swap for some one interested. Theres way to many details to list every option. The complete package from 5000.00 to 7000.00. Call me for more details. 281-615-6455 thanks, Wesley...
  10. faststang90

    4.6 3 v

    This motor and tranny have less then 200 miles on either. I went ALL out on my new set up so this will make a perfect swap for some one interested. Theres way to many details to list every option. The complete package from 5000.00 to 7000.00. Call me for more details. 281-615-6455 thanks, Wesley...
  11. faststang90

    upr Mustang A/C Pump Eliminator w/ Holes?

    any one have one of them. i have just the alt,water,pump and i added a stock type part to make the belt tighter but the belt is making noise. i dont have any other parts does this just bolt to the motor 86-93 Mustang A/C Pump Eliminator w/ Holes
  12. faststang90

    Please help need get car going asap

    i had just the water pump,alt and it was running hot so i had to get a pulley so it would go more around the water pump. mine was a 57.5 belt
  13. faststang90

    Lug nut stud install

    i went to a long stud on all 4 wheels and i had to drill out the front to a larger hole. i was told to have the hole about .020 smaller than the lug. i have a big drill press so it was not a problem.
  14. faststang90

    need help selecting Stage 8 fasteners

    i would do the one with the long lock because it has a 12 point locking piece and it gives u more of a area to install the lock. i just got a motor with them but all the parts are missing.
  15. faststang90

    Lug nut stud install

    i just installed long ones and i got a nut with thick washers and pulled them in with a wrech
  16. faststang90

    Extended Axle Questions

    what is the lug the bullit rims take is it a cone type or the one u last posted. the one i posted is a cone type and the last on is like a weld rim uses. if u what to keep the long studs u are going to have to use a open end lug
  17. faststang90

    347 pistons

    guess it matters what kit you are tring using. i was looking at the dss kits and there kits are the way i posted so you need to get all the parts checked to make sure they work 302 Based Strokers
  18. faststang90

    Extended Axle Questions

    like this? its a 1/2 with a hole not sure if the angle is right on the wheel side. Summit Racing SUM-7540026 - Summit Racing® Lug Nuts - Overview - SummitRacing.com
  19. faststang90

    347 pistons

    a 347 is a 3.40 stroke and a 5.400 rod. a 331 is a 3.25 stroke and a 5.315 rod. a 331 uses a 5.315 rod and a 347 uses a 5.400. so the piston would be down in the hole .085 because of the rod and then u would be another .150 down in the hole because of the stroke. so that .235 down in the...
  20. faststang90

    do I have any chance of this oil pan working?

    u will need a fox body oil tube pick up to work with the mustangs pan.
Top Bottom
Back
Forums
Menu