Search results

  1. Fox_84

    Subframe Connectors

    There are a million and one posts to search on this, but my opinion is only from what I have on my 93. I have the Wolfe Racecraft, through the floor connectors on mine. You have to cut through the floor and are not that good of an idea for a newbie do it yourselfer, but they are very rigid...
  2. Fox_84

    master cylinder need bleeding?

    I was working on installing cobra brakes on the front of my 93gt and got near the end and found out I did not have the correct length banjo bolts. I left it setting overnight with the brake lines tied up as high as I could get them so they would stop pouring fluid out (by the way is this normal...
  3. Fox_84

    suvlights.com headlight harness

    I purchased the universal headlight harness that suvlights.com sells with the intentions of running just Sylvania Silverstars and a 3g alternator. Just trying to get as much juice to the bulbs as possible so they will be as bright as possible (dont want to do a retrofit HID). ANYWAYS, the plug...
  4. Fox_84

    Headlight Harness

    Is there a silverstar bulb for the foglights that is ultras like the headlights ( part Number)? Also, thanks alot for the part number on the headlight bulbs. And do I need to beef up the wiring on the fog lights if I run a brighter bulbs in them? If so, any help here would be great...
  5. Fox_84

    Headlight Harness

    Noone has any advice on this?
  6. Fox_84

    Headlight Harness

    What about bulbs? I have decided to stay with the factory lenses, just put all clear corners and parking lights, no amber. Can I run a hotter/higher beam bulb, if so what should I run, where do I get them, and part numbers? Is there any advice on wiring them except the wiring harness that...
  7. Fox_84

    Headlight Harness

    is there a harness I can buy for this fix or a thread that shows how in detail? Also what about a part number on the silverstar bulbs, which ones are the best?
  8. Fox_84

    Headlight Harness

    I am looking to make my headlights as bright as possible without the cost of doing an HID retrofit. From what everyone suggests, Sylvania Silverstars are the way to go, so that is what I am going to get. I did many searches and found one that said upgrading the wiring harness is not a must...
  9. Fox_84

    New member with project(pics) *need advice*

    personally if I were doing the same project as yourself, I would start with chassis/suspension work, then go motor and tranny, and lastly paint. I am not positive but I would say you would be safer with 4" hood though. You MUST start with torque box reinforcements, welding all the torque box...
  10. Fox_84

    Trust StOcK block or NOT

    Well, I would like to stick with the 302 because of cost to convert. What is the best H/C/I setup I could do? I also plan to rebuild, bore, balance, port, polish, etc. to squeeze all I can. Any other advice to get all I can out of the stock 302? Also if I do a stroker for a street car...
  11. Fox_84

    Trust StOcK block or NOT

    See I was hoping 400-425na plus spray. I know that will be pushing the stock block. What block do you recommend that is more affordable than a dart. What block could I get by with?
  12. Fox_84

    Trust StOcK block or NOT

    I am about to start my engine build and just not sure what block to go with. I dont want to spend the money for a dart. I am looking to build an engine at around 400-425 horses. It will be street driven and not often raced, but ran hard. I plan to put a TKO 500- or 600 (opinions). Want to...
  13. Fox_84

    Ford Racing B or C springs?

    I have the C springs and i guarantee you a way stiffer ride than factory. So if you are definitely worried about a softer ride, go B. If you want a car the digs in to corners hard with absolutely no body roll and can sacrifice some ride quality, go C
  14. Fox_84

    Anyone ever buy these, what is your opinion

    Where to buy LX Taillights I am looking for a good place to buy LX taillights from... I want to buy the complete taillight, not just the lenses. I did a search and found where many said to not buy KSR. I wanted to buy OEM but I cant find anyone that sells the housings and lenses complete...
  15. Fox_84

    Anyone ever buy these, what is your opinion

    Cobra lenses from ebay, anyone buy them? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=016&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=260043753707&rd=1,1 These are the ones from Blue Oval Industries. Anyone ever buy a set from them? What did you think? Anyone got pix and...
  16. Fox_84

    Anyone ever buy these, what is your opinion

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=014&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=330039819620&rd=1,1 I am looking for a set of taillights for the GT. Didnt really want to go LX but I cant find any good GT tails. I came across these and just wondering if anyone else...
  17. Fox_84

    Difference between GT and LX taillights

    I wasnt looking for a smarta$$, just making sure I was clear. Wasn't really asking you anyways, but thanks.
  18. Fox_84

    Difference between GT and LX taillights

    So the tails are the same, just lenses are different. I can put GT lenses on LX tails and all will look original? Thanks.
  19. Fox_84

    Difference between GT and LX taillights

    Your threads are not disappearing. They are being deleted. You may NOT post Want or For Sale ads within the forums except for the classifieds forums. Please read the sticky at the top of the forum! Daggs
  20. Fox_84

    5 lug rear disc conversion has me pulling my hair out

    I had the exact same problem except before I used and JB weld, I had the center hole in the factory plug welded up. I would suggest finding someone that can weld aluminum and do that after cleaning all that JB weld off. I would never suggest that crap on brake components, it is just TOO...
Top Bottom
Back
Forums
Menu