Search results

  1. Fox_84

    Ultimate rear end build??

    I used an Eaton posi locker with 373s and Strange 31 spline axles. It is SOLID! I did not weld the axle tubes, because you always take the chance of warping them if you REALLY dont know what you are doing. I do like the above recommendation about only a ratcheting locker for street use. Mine...
  2. Fox_84

    What tranny?

    If I plan to stop at somewhere around 450 hp with 373s in the rear, what tranny would I be better off with, TKO 500 or 600? Is the TKO600 geared a little higher and really too high for 373s? This is just kinda what I gather after reading, correct me if Im wrong. What tranny and WHY?
  3. Fox_84

    Paint and prep...

    Being a body guy myself, not for a living but on the side, if you are going black, without a doubt and your mind isnt changing, I would definitely go with a PPG epoxy primer. DP90LF is the primer, it is black in color. Then it requires a catalyst. There are two types of catalyst you can use...
  4. Fox_84

    GT (cheese grater) Taillights

    I can not find a MINT set of factory GT taillights anywhere. Anyone know where to look except ebay? I have looked on ebay and they just dont come across there very often. The car is in the body shop now and need lights asap. Let me know what you have and pix would be great. Thanks for any help.
  5. Fox_84

    suspension help

    I have a 93 with MM rear control arms, Ford C Springs front and rear, adj. uppers in the rear, and was wondering if anyone had suggestions on sway bars? I am running 17x9 03-04 cobra rims with 275/40 in rear and 255/40 in the front. Not track car but ran hard on the street. I am trying to get...
  6. Fox_84

    help me find this part - metal moulding clip for side skirt

    jy is junkyard
  7. Fox_84

    Anybody else dealing with the stress of College?

    I am hearing you 100%. I have 21 hours left counting this semester of which I am only taking 12 so I will graduate in May of 07. i am a business management major and the stress is TREMENDOUS classes this semester: International Mgmt. Labor Relations and Collective Bargaining Human...
  8. Fox_84

    People These Days!!

    Man I used small scres in the top and bottom side of the housings. You cant see the bottom ones and only see the top ones when the hatch is open. Also get black screws and they show even less. I put about 4 on top and 3 on bottom. Just and idea and it looks very clean.
  9. Fox_84

    In car vid

    Dude I have torque box reinforcements from rick, also welded all seems, no ice or water, MM control arms with solid bushings, and I have no trouble at all getting third gear. Dont know what your stang ran like with stock engine but I know mine has some balls!!!
  10. Fox_84

    In car vid

    I am saying starting in first, not reving and dumping but hitting first, then second, then third. Of course I cant do a 40mph punch in third or nothing. but the guy posting this just went through the gears starting in first, that is what I am talking about. You said wouldnt lose traction...
  11. Fox_84

    In car vid

    Not trying to start any new wars here, but the statement put up that no bolt on cam geared car would lose traction after second, is far from true. My gt has a bone stock 302 with 130,000 miles with no tune that I bought about 6 months ago and getting ready to do an engine build but for now all...
  12. Fox_84

    93 dome light and sunvisor questions

    50resto does not have the 93 dome light. Do they? Also, their sunvisors are not complete. any other ideas?
  13. Fox_84

    93 dome light and sunvisor questions

    I have a 93 gt and converted to black interior. All I have left is sunvisors and dome light. I am wanting MINT pieces and I havent came across anything yet. Would a dome light or set of sunvisors work from a newer body style mustang? Any advise here or anyone who has some parts I could use...
  14. Fox_84

    where to buy window trim?

    I am having the car completely repainted and wanted to replace the trim that goes under the door windows. The trim that goes the width of the doors. It is metal with some type of plastic or rubber coating on it. They are bad to dry out and the coating start to peel. Not the part that wipes...
  15. Fox_84

    4 cylinder springs up front?

    A lot of people run this setup and it seems to work fine. It will lower a little but not so much as a lowering spring and it still rides nice. This is just my 2cents.
  16. Fox_84

    Stock Fox GT SPOILER

    Anyone know where the best place to get a nice, clean stock gt spoiler for my 93 gt? I have been working on taking my car down to bare nothing and sanding everything to get ready for a repaint and my dad knocked mine from 3 foot to the concrete floor and now it is trash. Anyways anyone have...
  17. Fox_84

    looking at buying a dirt bike tomorrow...

    I had a 2001 and it was a great bike. I only put a FMF Fatty pipe and jetted the carb. It would all depend on how many hours it has on it and how roughed it has been. I only had about 35-40 hours on mine and it was CLEAN, ran hard but maintained really well and I only got $2000 out of it 3...
  18. Fox_84

    where to buy weatherstriping?

    getting the pony a new coat of paint and wondering the best place to buy nice weatherstriping??? I dont want that crap that dont fit worth a $h!t, I want good fitting parts. Anyone know where to go to get all the rubbers for the entire car? Thanks.
  19. Fox_84

    steering "chatter"

    Just to let you know, I replaced my rack, pump, and all lines. Everything was brand new even fluid. My car was not doing it when I replaced all I was just looking for better steering feel and the original parts were wore out anyway. I put a sn95 rack for tight steering feel and now I have...
  20. Fox_84

    breaking in new gears

    I need advice about breaking in my new 373 gears. Does it matter how hard I drive it? I have heard drive 10 miles, let cool, drive 10 miles, let cool, for about 30 miles worth. Is this necessary? Do I need to change the oil after break in? Thanks for any and all advice. Also as of now, I...
Top Bottom
Back
Forums
Menu