Search results

  1. T

    T45 Replacement Parts/Reman Tranny

    Can it not be rebuilt? I just take my trannys out and have them rebuilt at a good local tranny shop depending on the tranny model and the damage inside will determine the price Usually if you do not have any major components( such as input/output shafts) damaged it will not be too much...
  2. T

    03/04 Cobra clutch for a 02 GT?

    The 99 to mid 01 has the T45 tranny with the 10.5 clutch and fly but then they went to the 3650 which uses a 11inch fly and clutch just like the T56 He actually swapped his 3650 to a T45 because he was having so much problems with it, but kept the 11in fly so he still uses a 11in clutch
  3. T

    how to remove radiator from 01 GT

    blunt basically has it written out I had the old one out, transfered the fan and had the new one in, in about 30 min. Couldnt be a easier task Dont forget to drain. :nice:
  4. T

    03/04 Cobra clutch for a 02 GT?

    How is the stock 03/04 cobra clutch? My buddy has a 02 GT and blew his clutch and now is looking at a stock 03/04 Cobra clutch as a replacement. My only concern is that it is worth his time putting a ford replacement if it is only going to get him more problems. Thanks
  5. T

    03/04 Cobra clutch for a 02 GT?

    A T56 in a Camaro/TA is hydraulic but in a mustang all are cable No he can drive, but he does a lot of racing and highway drop and go And i think it finally just gave out No both the 3650 and the T56 use a 11in clutch and flywheel Both will be interchangable In fact he took out the...
  6. T

    03/04 Cobra clutch for a 02 GT?

    My buddy has a 02 GT that blew up his RAM clutch and needs a replacement and is looking into putting in a 03/04 Cobra clutch His view point is if it can hold 390 hp/tq then its should handle his power Im just not so sure putting any stock ford clutch back into a mustang What do you all...
  7. T

    Race Bullet Mufflers

    Why do you want the 3" The 2.5 should work fine
  8. T

    Race Bullet Mufflers

    Brotherperformance.com was selling them for 25 a piece i think they still are I bought a set a couple months back and my buddy put them on his 02 Gt and if you like REALLY LOUD muscle car sound its the way to go Most of the time people ask him if he dropped a 350 in his GT He has...
  9. T

    SCT xcal2 & predator prices!!!!

    somewhere the diablo was selling for 325
  10. T

    Cut springs or buy cheap lowering springs on ebay?

    Those were the days, just slide under and change the oil I havent been able to change my oil with out the lift for two years i even have to use a floor jack just to get it high enough so can put i on the lift Cutting your springs will be fine just dont go too crazy Make sure you...
  11. T

    Radiator upgrade?

    Really The cobra radiator first came to mind when i thought about replacement What are the differences in the 03/04 cobra radiator compared to the gt Im guessing bigger, maybe more cores?
  12. T

    a couple little tech q's

    I have a spec II and it works great and grabs hard, the chatter comes from the spec TOB which for some reason they decided to make half of it out of plastic :nonono: . What i did was use OEM TOB(all metal) from ford and doesnt make a sound. Great grab no noise :nice: But it looks like...
  13. T

    Radiator upgrade?

    Well of course at the beginning of summer my thermostate gasket leaks and now their is a hole in my radiator and is constantly losing fluid. The gasket of course a no brainer. Now the radiator what are my options When i replace something I try to replace it with something better then stock...
  14. T

    What Kind Of Synthetic Oil Does Everybody Use?

    Royal purple all the way its between them and amsoil in my opinion
  15. T

    Estimated time of removal/install

    Personally i left the third starter bolt off between clutches, off road pipes and such its just not worth leaving it on Once you get k member and long tubes there is not trouble at all at reaching it
  16. T

    I'm sick of my TR-3650.

    I would take a my t45 over the 3650 any day my buddys 02 has had his 3650 rebuilt 4 times within 15,000 miles he eventually swapped a t45 no problems seems like the machs and 05 3650s are doing ok so hopefully they fixed it
  17. T

    Estimated time of removal/install

    with car lift, trans jack and air tools its takes no time at all it takes more time to have the fly wheel turned but if on jack stands, hand tools and working on your back you might be under the car for a while so it depends
  18. T

    Long tube problems

    youll find that some long tubes are quieter at idle but louder at WOT. And also yeah a O/R x or h will be louder as well
  19. T

    Spinning only one wheel with slicks?! :(

    I would worry about coming back on a flat bed if you are launching with slicks on a stock rear end
  20. T

    Damn Big speed bumps >:o

    I put in subframes and that took all of the abuse away from my exhaust
Top Bottom
Back
Forums
Menu