Search results

  1. 2

    What RPM's give full charging with Steeda UD Pulleys? With stock or Steeda Alt pully?

    I read most the posts on the UD's I could find, but I did not see any numbers on what RPM's will the Alt be able to provide full charging? I know at idle they will not be providing the full charge but what RPM will they be? I have a Optima Yellow Top, and I really don't have my radio turned...
  2. 2

    Finally got a Dyno done...ok numbers I guess.

    Graph should be up now, had problems attaching it. ~K
  3. 2

    Finally got a Dyno done...ok numbers I guess.

    Finally got some time on a Dyno at a local shop. The guy at the shop said there was not much left to be had without more mods. Did 3 runs with weather at 62 Degrees and around humidity 10% Max HP 242 Max TQ 285 A/F hung around the 13 area. What do you guys think about these numbers...
  4. 2

    Why does my window squeek :(

    Mine only do it when they are dirty. A good cleaning in/out and no more squeaking. You can also try some glass polish..that might help. ~K
  5. 2

    Bought a new radar detector - BEL RX65

    BEL's are good, but mine seem to break every 1.5 years. Maybe cause I leave it on the dash all summer and winter long. Been through 2 940's and now on a 945. The RX65 is supposed to be BEL's newest and greatest next to the STi Pro. They are usually $330, but you can get them on ebay for...
  6. 2

    Mustang Cruise 4/22! Raleigh - Greensboro!

    Why Southpoint? We should move it down to the Hooters in Morrisville, off Airport Blvd. I know the GM and I am sure I can talk him into it. ~K
  7. 2

    Where to get a Dyno tune in NC?

    Are you thinking of Randy from Haywood Customs Speed Shop, I think they moved and changed names, its somthing racing right now. I have a appointment for some dyno time with him next week. ~K
  8. 2

    All Mustangs and Fords Curise-In at Hooters in Mooresville,NC 3/31/07

    I am planning to come down from Raleigh for the weekend. The weather still saying isolated Thunderstorms.. Everyone still going to be there? ~K
  9. 2

    New suspension and un-even ride hight - How to fix?

    Too bad I did not keep my Stock springs, they were pretty shot anyway. I think the extra weight in the back is killing my rear quicker then normal. Is it bad to mix and match differnet spring types? Are there differnet springs that might hold that extra weight in the back better then these? ~K
  10. 2

    New suspension and un-even ride hight - How to fix?

    So about a year ago I put on the Bullitt suspension from Ford (M-5400-A) I think the part number is. Car rides pretty good and I like the suspension, but... My problem is that the front of the car is sill 1" higher then the rear. 28 1/4" front vs 27 3/8" Rear. :bang: I think it is because...
  11. 2

    Where to get a Dyno tune in NC?

    Well I think it is about time for me to get a good tune and drop the standard diablo performance tune. I figured with a few Dyno runs and that info, I could use the tune they make for me or send the info off to Tim and get one from him... My question is, anyone know a good shop in the NC...
  12. 2

    Brake Pedal Travels more than usual after Bullitt Brake Kit

    Are the calipers put on right? I put on a set on of cobra's backwards / upside down once and had the same weak peddle even after bleeding them. Double check the install, check for leaks, don't use speed bleeders, make it a two person job. If all that fails, then you may have to bleed the MC /...
  13. 2

    Pulsing Brakes

    I warped a few set of cheap rotors, blanks, drilled / slotted, before I finally broke down and got some blank cobra stock brembo's ( I have cobra brakes up front). Get the zinc plated if you can find them, that way you don't have to paint them to keep them from rusting and looking like crap...
  14. 2

    4.6 Spark Plug Wires Routing? Advice!

    Aren't all wires covered in rubber which is an insulator so they should never spark across unless there is a cut in the rubber. As far as some RF being created some how, if you are worried you can buy some 3M copper EFI tape that will block almost any RF, we use that tape to seal RF leaks in...
  15. 2

    Brakes STILL squeaking...are my axles BOTH bent?

    Are the tires and wheels balanced. Vibration at 50-60 is usally a off balance issue, and if the wobble it could cause the brakes to squeak on and off with the wobble. Also, are the rims bent at all? ~K
  16. 2

    Brakes squeaking the first few times I hit em in the morning

    Sounds like a little rust build up, or the brake dust from the day before just hardened on the rotors. If it stops after a few uses, I would just live with it. ~K
  17. 2

    brakes squeaking

    There could be lots of causes why they squeak. I got new brembo rotors and pads (Hawk HPS first) on all my brakes a few months ago. My front are great but one of my rears squeak. Ususally squeaks when I am not using them. It finally got so bad I had someone replace them. Those did the same...
  18. 2

    seat belt beeping help

    I think there is something in part the seat belt plugs into. Maybe someone cut the wires down there on accident? ~K
  19. 2

    Speeding ticket - need advice please

    I would get a lawyer. A lawyer has gotten me out of some serious tickets, speeding dropped, 5 point reckless dropped to 1 point, etc. Find a local lawyer to the MD area. Try http://tixnix.com/ my gf just used them to find a lawyer a few months ago and her ticket got totally dropped. A...
  20. 2

    TYPHOON INTAKE w/ 75mm Throttle Body and upper Plenum - Does +35hp sound true?

    So I was surfing around and found the above combo made by Professional Products, and they claim its a +35hp with the package. linky: http://blueovalindustries.bluekeyinc.com/products.php?pid=99012898 Do you think the +35hp is real or overstated? Ideas / comments? ~K
Top Bottom
Back
Forums
Menu