Search results

  1. valley82

    Trunk Ideas Wanted

    Very nice!
  2. valley82

    Next Sticky Post Poll

    Already have the big wilwood brakes on all four corners, and the T5 with the modern driveline hydraulic clutch shifts like a modern stang...so voting for the 8.8 rear end.
  3. valley82

    Trunk Ideas Wanted

    Agreed, the entire interior is dynamated and then covered with heat/sound deadening wool like mat with silver material from mustangs plus (quiet ride solutions) the combo makes a huge difference in how quiet the car is inside and out.
  4. valley82

    Windshield Trim

    And be very patient...
  5. valley82

    Trunk Ideas Wanted

    I used the coupe trunk carpet kit, built a sub box that matches the angle of the sheet metal behind the rear seat and is vertical on the rear of the box. The carpet kit is just long enough to go up the back of the box and looks pretty clean. Mounted a 10" alpine sub in the box and a 5 channel...
  6. valley82

    New Seats

    Headroom was not an issue for me, it was leg room... Advertising???
  7. valley82

    New Seats

    I removed the seat pans (humps) from the floorboards, cut an inch and a 1/4 out of them and rewelded them back in. I am 6'3" tall so it was the only way for me to be able to drive the car after I did the TMI sport seat upholstery and foam. I have plenty of leg room between the steering wheel and...
  8. valley82

    First Post!

    Listen to 1970_347, bag and tag Everything! It made my resto much easier on the way back together. Sounds like a smoking deal on that ride. Oh and welcome there is a lot of great knowledge here.
  9. valley82

    Front Wheels Too Far Forward

    I would try the adjustable strut rods to get the lower arms back a little then realign, you should be able to center the wheels better in the wheel well. I am no STANG expert but it worked on mine and I was still able to align it to the Shelby drop specs. These are 17" with 235/45
  10. Imported Item

    Imported Item

    • valley82
    • Media item
    • Comments: 1
    • Album: Valley82's 66 coupe
  11. Valley82's 66 coupe

    Valley82's 66 coupe

    • valley82
    • Album
    • Comments: 0
  12. valley82

    Finally After Eight Years...it's Alive!

    They are the stock seats with the TMI sport pony seat and cushions w/headrestss. I cut the seat pans down 1 1/4" then welded them back into the floor. I am 6'3" and have plenty of leg room between the seats and steering wheel. As far as comfort they are as nice as my 2010 dodge 3500 Laramie...
  13. valley82

    Finally After Eight Years...it's Alive!

    Thank you guys. Yea, the first drive was the BEST! I know that pic was before I put on the headlight doors, but they are on in the top pic. Now I need to find another one for my som and I to build together. I'm telling you, if you want to switch to EFI go with the Edelbrock Estreet, super easy...
  14. valley82

    Finally After Eight Years...it's Alive!

    Took her out for a spin and she ran great. Could not be happier! Edelbrock Estreet EFI is a great product. Still need to tint the rear windows but my out of control resto-mod is now a runner.
  15. valley82

    neutral safety switch HELP!

    Where can I find a neutral safety switch wiring connector??? My tranny is a new T-5 and has two studs that I assume are designed to have some sort of push-on connectors, I have searched all of the stang vendors and come up empty???
  16. valley82

    Help! where can i get a differential carrier for an 8 inch

    Currie Enterprises Mustangs Unlimited (or) Plus don't remember which one.
  17. valley82

    Coolant ports on a 302

    Thanks D. had not thought of that!
  18. valley82

    Coolant ports on a 302

    are there any more water/coolant ports on my 302? performer rpm has one, but I need two additional temp sensors to complete the car. 1 - temp guage 2 - retrotek EFI 3 - electric fan the motor is a Ford racing 345h.p. 302
  19. valley82

    Retrotek Purchase

    Been a while since I've worked on the car, I have the pump and fuellines run, the hardware mounted and the throttle body is on...just need to run the wiring and light the thing...problem is that being a Refrigeration/AC contractor and the temps are rising here in so. cal. so I've been very busy...
  20. valley82

    Retrotek Purchase

    Received the polished kit tuesday, Very nice looking piece. Kinda made me laugh and get torqued all at the same time...there is a raised portion on each end (the bowl if it was a carb) on which is embossed "professional products" Now to get some time to install the system. Gotta tell you...
Top Bottom
Back
Forums
Menu