Search results

  1. 4dStang

    Parting it out 88 Mustang

    I have a 88 mustang 4 cyl, 113 K miles with rebuilt auto trans and red interior. It has new 15" Nitto tires with only 800 miles on them and they are mounted on ten holes and pruchased in September.. The car is whole and actually starts and drives. I drove it from Utah to St Louis and that is...
  2. 4dStang

    Parting it out

    I have an 88 Mustang 4 cyl vert that is nearly full to part 113 K miles. Vehicle has near perfect red interior and cream colored outside, auto tranny. Everything runs, I just started prep for paint and got overwelmed with work to paint it. I can get pics if desired. I sell under minders4 on...
  3. 4dStang

    gt hood and cobra bumper prices

    Ship it greyhound (bus) shipping. It's much cheaper and sometimes faster. wrap the bumper in brown masking paper from lowes and the shipping will be about $55. I send all my big items through the bus as opposed to a truck. I bought a 96 Cobra hood and had it shipped via greyhound for under...
  4. 4dStang

    my wipers keeps coming on ..????

    I have the exact same problem in my 88 vert. I changed the Govner, motor and switch (twice) and it still is on intermittent low. I ended up just pulling the fuse and inserting it when I need it. I'm parting the car out anyway now so its moot. I couldn't fix mine so I can't tell you what it...
  5. 4dStang

    Electrical guys help connect stero please

    for $25 I'll send you all the parts discussed priority USPS (I'll pay shipping) and you can have them by this weekend. -----For now----- If you really want to drive your car, assuming you can open the doors, do as I said earlier about pulling the ign assy out and once the assy is out, use...
  6. 4dStang

    Electrical guys help connect stero please

    I had assumed you were starting it with a screwdriver. That would trash the tumblers and allow any key to work. Heck if a screwdriver works, so would any key. Sorry for the confusion on that.
  7. 4dStang

    Electrical guys help connect stero please

    Like I said, I have a set of ign and door locks. I was going to put them in an 88 stang but I decided to part it out since I have 3 stangs total. I need to get rid of something. The door keys will be different from the ign but many cars ar like that. The ign switch I have is new and only a...
  8. 4dStang

    Need opinions on removing wrench from my engine

    88SC, dont ever let it be said that no one likes ya - you got 3 pages of folks trying to help. :nice: Ditto. Tons of Mustang knowledge here. Keep the head up!
  9. 4dStang

    Electrical guys help connect stero please

    I went to autozone or advance auto parts and got a set of keys and a NEW ign for $13.50. Locksmith, + servicecall = $90 or so. Whats cheaper? I can change the ign in 10-15 minutes. A locksmith can do it if you want the same key but if you are starting it with a screwdriver, you have already...
  10. 4dStang

    Odometer froze

    Crawl under the car and remove the speedo gear set. Check the teeth and clean the gear with brake cleaner. I just did this to my Cobra for the same reason, speedo, odo was dirty as crap and with it being electronic, could cause problems. It fixed my problem. This applies if you have a 5...
  11. 4dStang

    My seat broke today

    My 95 power seat broke and I ain't fat! Anyway I replaced it with a Manual track for cheap. If you need a manual track for a SN95, I have an extra to sell. Let me know.
  12. 4dStang

    95 Cobra Clutch recomedations please!

    The FRPP king cobra clutch kit is made by valeo and Ford. The PP was a Valeo and the clutch and TB were ford staped. I just put one in two weeks ago. I think it is a nice soft clutch but it may not be the best if you are looking for drag launching. Just depends on how much you want to spend...
  13. 4dStang

    Need input on fixing my dashboard lights

    How deep is the melting lenght wise? I had a melt down near my vert swithc on my 88. I went to the Junk yard and cut off what I needed then just spliced it in to the old harness with butt connectors and it works great now. If you need a partial harness, I am just starting to part a 88...
  14. 4dStang

    Electrical guys help connect stero please

    Super simple to replace ign. I promise! Then you will have new keys and a new ign. If you want more info PM me or email me at [email protected]. I have a set of door locks too. If you wanted them changed. Actually I have two sets of door locks and a coupe trunk lock assy.
  15. 4dStang

    Electrical guys help connect stero please

    As far as the stereo wires, go to walmart or Circuit city and buy a SCHOSCE harness for Ford. Wire the stereo to the corresponding wires, Blue is amp turn on, red is power, yellow is Constant power (fuse this) and black is ground. The rest are speaker wires and maybe a power antenna and...
  16. 4dStang

    Electrical guys help connect stero please

    For a fox body, changing the ignition is easy. I just did it myself for a few dollars. I even have an ignition that is bearly used that you could replace it with if you email me, I'll sell it cheap. Anyway, take off the collar around the steering column. Turn the keyless ign to on. There is...
  17. 4dStang

    Need opinions on removing wrench from my engine

    True! The mirror idea is a good one. Like a little dental mirror, shine a light on it and look around the hole. I'm scared to put anything near engine orafaces such as the intake, carb or dizzy hole. This is actually making me want to think harder about being under the hood with tools.
  18. 4dStang

    Need opinions on removing wrench from my engine

    Maybe a coat hanger wire could be bent in many different ways to at least locate if the wrench is in the rotating assm or partially in the pan or just laying back out of sight. That really sux that you have to pull the motor or at a minimum, the pan but grab a good light and some wire and try...
  19. 4dStang

    wtf was that?? (help!!!)

    Gotta watch out for those sneaky floormats! :lol:
  20. 4dStang

    Need opinions on removing wrench from my engine

    I am missing a 9/16" socket for the same reason you are. it fell into an old sixty something Bonneville that had a big motor and was as big as a Navy Desroyer, but my tool that I lost was a socket. It'll sit at the bottom in the sludge until one day when someone will pull the engine and find a...
Top Bottom
Back
Forums
Menu