Parting it out 88 Mustang

I have a 88 mustang 4 cyl, 113 K miles with rebuilt auto trans and red interior. It has new 15" Nitto tires with only 800 miles on them and they are mounted on ten holes and pruchased in September.. The car is whole and actually starts and drives. I drove it from Utah to St Louis and that is it. i started a paint job and some one hit my other mustang and Now I have no time to finish the paint because I have to finish fixing the 95 Stang, the wifes car, and a city warn in 95 Cobra. So if you need parts inside or out, Let me know now before I start putting parts on ebay. Four verification, I go by minders4 on ebay if you want to check my feed back.

-Perfect recently bought front bumper assy for LX
-New inner tie rod on steering rack
-Great red interior with good ash tray assy
-7.5 rear (gear unknown)
-Rebuilt auto tranny.
-All switches and trim for LX and 4 cyl
-Seats are faded a little but are not ripped
-Local to St louis area
-Will ship large parts via greyhound vs truck

Let me know if you need something

Chris
 
4dStang said:
I have a 88 mustang 4 cyl, 113 K miles with rebuilt auto trans and red interior. It has new 15" Nitto tires with only 800 miles on them and they are mounted on ten holes and pruchased in September.. The car is whole and actually starts and drives. I drove it from Utah to St Louis and that is it. i started a paint job and some one hit my other mustang and Now I have no time to finish the paint because I have to finish fixing the 95 Stang, the wifes car, and a city warn in 95 Cobra. So if you need parts inside or out, Let me know now before I start putting parts on ebay. Four verification, I go by minders4 on ebay if you want to check my feed back.

-Perfect recently bought front bumper assy for LX
-New inner tie rod on steering rack
-Great red interior with good ash tray assy
-7.5 rear (gear unknown)
-Rebuilt auto tranny.
-All switches and trim for LX and 4 cyl
-Seats are faded a little but are not ripped
-Local to St louis area
-Will ship large parts via greyhound vs truck

Let me know if you need something

Chris

What kind of Nitto's, and how much?