Search results

  1. timewarped1972

    OH YES, Its alive!! First drive with 3000 Stall!!!

    ....the converter does start to couple and turn the drive shaft before it's rated stall........it's just not a solid lock like when it reaches the stall speed......in essance......it's like slipping the clutch........ what he said about the higher stall creating heat and...
  2. timewarped1972

    running a 4 ga ground strap

    i think the general idea is because the 3g puts out more you wanna have a heavier ground...... example......your battery.....it has what ever gauge battery cable for a ground (usually 4 or 6 on most cars) it doesnt have like a 4 gauge positive and then some shoe string size...
  3. timewarped1972

    All AOD's equal?

    just to clarify it's the internal drive gear in the tranny tailshaft........of the tranny.......not the speedo gear itself, just incase i said that wrong.......
  4. timewarped1972

    All AOD's equal?

    the speedo drive gear in the tranny is different too i believe........84 to 89 is one drive gear, 90 to 93 another....in a 90 to 93 aod you can only get the correct speedo gear for up to 3,55 gears unless you swap the old speedo gear drive from the 89 in they did that with the...
  5. timewarped1972

    running a 4 ga ground strap

    great thanks.......
  6. timewarped1972

    running a 4 ga ground strap

    is this the area?? where the screw driver tip is pointing??
  7. timewarped1972

    running a 4 ga ground strap

    ok so i'm guessing that means by the windsheild washer where that other ground is bolted is the place to run it........ i had originally thought people were refering to that ground strap from the back of the engine to the firewall as well, but being it's there, and...
  8. timewarped1972

    running a 4 ga ground strap

    ok, stupid question...i got around to buying a 4 ga wire to add an extra ground strap being i have a 3g. i found a place near the battery that already had some ground wires atatched to the inner fender, i ran it from there to a a/c compressor bracket.......but then i read in a...
  9. timewarped1972

    bad vibration above 65mph

    well the driveshafts definatly can cause a problem......but not to sound stupid but......as tires wear they sometimes become un balanced, if you've had any panic braking situations that could flat spot them, that will do it too........burn outs have been known to toss wheel...
  10. timewarped1972

    Do I need a new Master Cylinder???

    i think you need the master cylinder for like a 93 cobra....... maximum motorsports has some info on this as well www.maximummotorsports.com i think when i go to do mine i'm just going to go with the braided lines and the caliper bushings and see if that...
  11. timewarped1972

    will bald BFG DRs hook??

    i would think if you got then heated well they would.....it's the heated compound that gets sticky that makes them hook....although i don't know when the treads gone how much is left of the sticky stuff or the tire....... be carefull driving them bald ass things on the...
  12. timewarped1972

    Need Clutch Adj. Help I'm Going Crazy!

    something else i just thought of, and this may sound dumb but i'm askin anyway........you did remove the rubber grommet from the end of the cable and file down the 4 small tabs before putting the cable through the fwa correct?? just checking......
  13. timewarped1972

    LX Repair Log - Lots of pics DUW

    that is SHARP!!!!!!
  14. timewarped1972

    Need Clutch Adj. Help I'm Going Crazy!

    ok here's what i did.......you have an adjustable cable.......i took my adjustable cable and tightened it all the way on the clutch fork........and just used the fire wall adjuster to adjust the cable.......in effect i adjusted the adjustment out of the cable itself.......what hook are you using...
  15. timewarped1972

    just noticed a small problem

    did you make sure the belt is proprly routed?? other than that and a new belt if nothing else has changed it should work
  16. timewarped1972

    Another tranny qwuestion

    i believe they make the tko 600 available with a .64 5th gear for freeway cruising.......
  17. timewarped1972

    Clutch Quadrant

    if it's the stock quadrant, try and get some needle nose pliers in there, or, a long skinny screwdriver to try and pop them out....after that you pretty much have to take a screwdriver and pry/bust the old one out.....if it's the old plastic one your talking about...... and...
  18. timewarped1972

    ? about the design of the factory neutral safety switch

    thanks.........
  19. timewarped1972

    first impressions after electric fan install

    glad you got it fixed.......electrical problems suck, especially that "fried wire" smell...... was that the regular base model fan or one of those newer "extreme" black magic fans??
  20. timewarped1972

    ? about the design of the factory neutral safety switch

    ok, was the factory n/s switch made so it will only start in neutral ( gear shifter) or was it made so it will start in any gear so long as the clutch is depressed?? here's the deal, got the t-5 in, i purchased a complete t-5 wiring harness for the tranny...
View older results
Top Bottom
Back
Forums
Menu