Search results

  1. mach1one

    carb selection on a 351c

    I've been looking harder at the demon series since I've had such bad luck with holley. They suggested the exact same thing. I believe that's what I'll be purchasing. Thanks!
  2. mach1one

    carb selection on a 351c

    I'm finishing up a rebuild and needed some input on the carb. 351C Aussie 2v heads XCellator intake Cam is a custom grind, can't find the card, but if memory serves me it's a 240/245 dur. 560/560 lift on a 110. solid lifters. comp 12:1 (yeah I know, heads were milled a bit more than...
  3. mach1one

    FR500s on my 73 mach 1 plus pics

    Last one :)
  4. mach1one

    FR500s on my 73 mach 1 plus pics

    Couple more
  5. mach1one

    FR500s on my 73 mach 1 plus pics

    Sorry for the late bump but I had a few pm's about the wheels and figured I'd post better pics. I finally got to take some day time pics. The brake kit still works great, the stopping power is incredible for a car this heavy. And on an unrelated note, where can I find the weatherstripping for...
  6. mach1one

    1971-73 Mustang Pictures

    Not with the gas prices being what they are :( I haven't driven it in a couple months :( :(
  7. mach1one

    1971-73 Mustang Pictures

    I'm partial to mine :)
  8. mach1one

    71-73 gauge pod

    I used the smaller size, 2 1/6" I believe. I know it's not the 2 5/8". I thought I had some pics but I can't find them. I'll try and remember to take some later today and post them.
  9. mach1one

    71-73 gauge pod

    I just recently swapped to Autometer gauges in the center pods. I couldn't find any guage kits, so after experimenting with various glues we found one that worked. I can't remember what we used unfortunately. After wiring them in, I had one person help me hold them in place while I'll...
  10. mach1one

    bouncing needles on new gauges

    It looks like the engine will need to be rebuilt anyway so I'll have time to take that on. That is probably a good idea since I wasn't very fond of some of the things the previous owners did.
  11. mach1one

    bouncing needles on new gauges

    Yeah, what's even crazier is that its been running fine. No charging or electrical problems aside from the one non-working guage.
  12. mach1one

    bouncing needles on new gauges

    The IVR wasn't hooked up; originally I wasn't sure if it was suppose to be. So here's an interesting conclusion. I went to check the engine/chasis ground and there was none! So I bought one, installed it, problem solved. The previous owners had also wired the guages such that they were on...
  13. mach1one

    bouncing needles on new gauges

    The coolant temp. guage never worked in the 73 mach, so I decided to update it with new guages (along with the oil pressure/volt. guage) while troubleshooting the problem With a new sending unit the guage doesn't read, it just bounces below 100; even with the car warm. To test the wiring I...
  14. mach1one

    new tag came in today for my mach

    :lol: Luckily most people seem to have a good sense of humor about plates like these :)
  15. mach1one

    new tag came in today for my mach

    The fact the previous owners have dumps exiting under the driver's seat helps that image :lol: :lol:
  16. mach1one

    new tag came in today for my mach

    :rlaugh: Unfortunately the 03 cobra is not mine, it belongs to a good friend of mine.
  17. mach1one

    LS1 Heads on a Ford

    I'm pretty interested in trying this on my 351c. What about headers? Are the bolt patterns the same as well? I'm having a hard time believe that LS heads would bolt up so easily. The dollar value and results of what you're getting would be awesome compared to working 351c heads.
  18. mach1one

    FR500s on my 73 mach 1 plus pics

    The previous owner installed air shocks, I've yet to mess with it.
  19. mach1one

    FR500s on my 73 mach 1 plus pics

    couple better night pics.
  20. mach1one

    FR500s on my 73 mach 1 plus pics

    Peer pressure is a bitch! haha! Just how we do. I think it goes without saying that drums behind wide 17" is retodded. With the system bled the car stops really well. I'm a sucker for better braking courtesy of my talon's setup.
Top Bottom
Back
Forums
Menu