Search results

  1. fastimes69

    Need help with my T-5

    If you really want to know what you are getting in to, order the T5 rebuild video from Hanlon Motorsports. Very informative and gives you step by step instructions. They are about 20 bucks and well worth it if you've never taken a tranny apart before..
  2. fastimes69

    Which Nitrous System.

    I bought mine from www.coldfusionnitrous.com. It's a wet kit adjustable from 50-200 shot with a 15lb bottle. The kit works great and is fairly priced. I paid around $550 shipped to my door..
  3. fastimes69

    Please help with main harness wiring issue!!

  4. fastimes69

    Please help with main harness wiring issue!!

    Well I've tried two harnesses already but still the same thing no spark, there is no power to the coil (red/green wire). Why would there be no power? Anyone???
  5. fastimes69

    Please help with main harness wiring issue!!

    We tried another harness off an 89 and now there is no power to the coil, no spark either. The positive wire on the ignition coil shows no voltage when cranking. We tried my coil, distributor, new cap, wires, and rotor and still no spark. I'm stumped. Computer is new to.
  6. fastimes69

    Please help with main harness wiring issue!!

    I'm working on a buddies car, it's an 88 gt. He bought a Ford Racing main wiring harness and computer from 5.0 Resto to be able to use mass air. I hooked up the harness and all but there is a couple of problems. The car has two connectors in the engine by the EEC test pin, a gray and black. The...
  7. fastimes69

    Distributor wont go all the way down on new motor

    Are you sure the shaft didn't come out of the pump while messing with it or turning the motor over if it was on an engine stand? It's happened to me on more than one occasion. When I've pulled out the distributor to check the timing or align the rotor to the no. 1 on the dis. cap they sometimes...
  8. fastimes69

    clutch install gone terribly wrong

    I knew it:D Glad I could be of help!! I still don't know why these pressure plates do that? I know the Motorsport clutch sets don't give problems like that...Later
  9. fastimes69

    Who is Running N2O in First Gear on a manual trans

    I've been running nitrous for about three years now with just a WOT switch. I've used a 150-175 shot off the line and never had a problem.I've launched at 5 grand a few times, but now mostly at 3500 or 4 grand. I use 26x10 slicks and they always hook even when I had a stock suspension setup.Now...
  10. fastimes69

    correct plug and gap

    Well what type of heads do you have? Stock heads= Autolite 24's .035 gap NGK 7773 .035 gap Aluminum Heads = Autolite 3924's .035 gap Motorcraft agsf32c's .035 gap I know there are more plug choices than these, but these are some of the more...
  11. fastimes69

    clutch install gone terribly wrong

    I had a similar problem with my brothers LX when we put in the King Cobra same noise, everything. When we would turn it on, you could hear a tapping noise on the bellhousing and you could feel it if you put your hand on the bottom part of the bellhousing while the car was on. We took out the...
  12. fastimes69

    f303 cam help

    Yes it will work, my cousin runs a similar set up to yours, all stock (even heads) with no probs. I ran the f cam with 1.7's on my stock ported heads and no problems either!!
  13. fastimes69

    GT-40 or GT-noisy ??

    My old TrickFlow Street intake used to sound like that at idle. It sounded like a whistle type sound. It's normal I guess, I had a 70mm tb and it ran great!!
  14. fastimes69

    Does anyone use these Performer RPM heads? Part #60229

    I just got mine also, can't wait to put them on!!I've heard nothing but good things from people using these heads. Don't forget the head bolt bushings.According to Edelbrock,you will need them in order to bolt them on to a 302!!
  15. fastimes69

    Thinking of going with F303 cam...

    I put mine in about 2 months ago. I went from the E to the F. because it was cheap and I like the choppy idle it has. Overall it's ok, nothing changed performance wise but I like it.
  16. fastimes69

    Wet or Dry Nitrous?

    I had the NOS 5115-2 (stage 2 ) Dry kit and used a 175 shot and my car ran 11.70's. I sold that kit and bought a Cold Fusion Nitrous wet kit with 15lb bottle and is adjustable up to 200 shot. It feels the same as the dry kit to me, no difference. I tried the 200 shot but my car would not hook...
  17. fastimes69

    ~whos got the answer...mechanic dosent!!!~

    If you have buddies who own Mustangs, try one of their computers on your car and see what it does that way you won't spend money on another computer..
  18. fastimes69

    PROBLEMS after cam swap, please help!!!

    Well yesterday we replaced the injector harness with an extra one we had and tried another upper intake just for the heck of it. To our surprise the car idles fine now, all we have to do is replace the plugs since they were fouled out from running rich. I figure the harness was bad because...
  19. fastimes69

    PROBLEMS after cam swap, please help!!!

  20. fastimes69

    PROBLEMS after cam swap, please help!!!

    My cousin had an E -cam on his 89 coupe and the car ran and idled fine. The engine is stock except for the pullies and exhaust. He decided to buy an f -cam and swapped it in. Ever since the cam change, it won't idle steadily, then it dies. It runs rich because the plugs are all black when we...
Top Bottom
Back
Forums
Menu