Search results

  1. J

    Injector Size ?

    I am putting together the following combination looking for suggestions on injector size. 306 bottom end gt40 heads milled about 20 thou, upgraded dual springs e cam, I know not the best. I have 1.7rr I may put on it. edelbrock performer intake 70mm TB/Egr plate Guy who built the motor said...
  2. J

    5.0 at the Shop - am I being Had?

    I wouldnt want a cheap autozone clutch in my car. Cheap parts are okay to put on some things that are easy and cheap to replace when they fail early. A clutch is something I would spend the extra money on and not have to replace again within a year. I think the prices are about on par with most...
  3. J

    ...Keep oil-fouling spark plugs... HELP

    Sounds like bad oil rings if you replaced the valve seals. Check your PCV screen to make sure it's not causing too much pressure and pushing the oil past the rings.
  4. J

    cam off 1 tooth?

    Did you have the spout connector out?
  5. J

    clutch

    Any brand name company should be fine Ram, Exedy, Center Force, ACT, ETC.....The HD Ford Racing ones seem to be good.
  6. J

    fluid advice

    Distilled will not build up minerals inside the cooling system.
  7. J

    92 Mustang does not start, nothing seems to work

    Sounds like the battery dropped a cell. Test the battery and I think you will find your problem there.
  8. J

    thermostat

    In Orlando I would get a 180.
  9. J

    2nd Head Gasket....3rd?

    You can pull them one by one and reseal them.
  10. J

    Diagnosing a Clutch Problem... help.

    Sounds like a clutch to me. I have 160k miles on my original clutch and it still grabs great, but it comes down to how the car was driven and who drove it. Is there any free play on the pedal ?
  11. J

    More fox idle woes...

    Check your coil to see if it's cracked or bad. Best to run the car at night and look at the coil to see if you can see spark jumping off.
  12. J

    Curious overheating issue... possibly an electric problem?

    Sounds like a gauge issue. I recently put in a Summit brand digital water temp gauge. The Summit brand gauge works great and was cheaper than autometer. Also if your still on the original radiator you may want to look at it. When I got my car my radiator was plugged up with chunks of rubber and...
  13. J

    Fox parts left over

    PM sent.
  14. J

    Fox parts left over

    Where are you located ?
  15. J

    Professional Products Intake ?

    I like the professional and the eldebrock intake for the sole reason you an pull the valve covers without having to pull the upper intake
  16. J

    Dim Light on Autometer gauges?

    Did the guage have a dimmer wire on it? If so just disconnect the dimmer wire.
  17. J

    wheels and tires, ponies or no ponies?

    Try American Muslce they had pony wheels when I looked not to long ago, unsure of the sizes though.
  18. J

    Aluminum radiators and E-Fan combos

    Thanks for the setups and input. I guess my next big question is the overflow tank. The Contour fans might be the ticket for me. I have one of the newer 2SP DCC fan controllers, I would have to email him unless someone else knows if it's able to run the 2 fan Countour setup.
  19. J

    Aluminum radiators and E-Fan combos

    I need a new radiator and I'm looking to upgrade to a Champion aluminum radiator. The core on the Champion is 2". The OEM radiator measures 11/4". I currently have a Taurus installed inside the factory Mustang fan shroud. I am concerned that with a 2" core I will not have enough room between...
  20. J

    New Paint

    Looks good. I bet that cost a few bucks.
Top Bottom
Back
Forums
Menu