Search results

  1. RyanSG

    Turbo mustangs

    yeah mine with the .84ar exhaust and .7 afr compressor sees 13.5psi by about 3200rpm. It's at 7-8psi at 3000rpm def not to bad of a spool. it'll also depend on how big the turbo is 2. usually the higher the .ar the more power u can see up top but more time to spool and vise versa. So it'll...
  2. RyanSG

    Turbo mustangs

    www.cardomain.com/id/ryansg Got a few pics of my setup on there although i'm gunna make some of it look nice this winter but it def works! (turbos can def be a hassle but i would take it over my super charger anyday) Although the supercharger was worth it when it came down to simplicity and...
  3. RyanSG

    no oil pressure and smoke from exhaust..?

    yeah the oil pumps fine, i have the relocation kit and pulled a few of the other lines off and just ran the starter and it was pumpen oil like crazy so the pump is good. I just got another sending unit for it and i'm gunna try that 2morrow and see what happens. I think there may have been...
  4. RyanSG

    no oil pressure and smoke from exhaust..?

    it dosn't sound liek anything is out of the ordinary. and i didn't see and major cracks alone the lifter vally. although i didn't take a real good look either, since i figured it was just my lower intake gaskets.... The pump is under 6 months old and it's a high volume so i would think the...
  5. RyanSG

    no oil pressure and smoke from exhaust..?

    yup i did change the oil and it's good that i did cas there was anti-freeze in it like 87stang said. So thats all replaced and i'm going to check it again and drain it etc to see if there still is some. I took the oil line off of the turbo and plugged it started it up and the same thing. no...
  6. RyanSG

    no oil pressure and smoke from exhaust..?

    only thing is though i should still have oil pressure even if it's leaking through the turbo.... gunna have to take another look at it 2day or 2morow. looks liek the motors gunna have to come out again....
  7. RyanSG

    no oil pressure and smoke from exhaust..?

    actually not to much, prob about 1200-1400 all said and done, i did it all myself and prob gunna redo some of it this winter clean it up etc. It was runnen great i just don't know WTF happend to it... I hope i didn't blow the bearings out man that would def suck... I was hopeing to not have...
  8. RyanSG

    no oil pressure and smoke from exhaust..?

    Hey guys, well i was doin a few highway pulls and all of a sudden my oil pressure goes down and smoke starts pooren outa my exhaust.... SOOOO towed it home and chercked it out. Compression was fine on all 8 cylenders.... So i figurd it was the lower intake, ive had oil and water probs from...
  9. RyanSG

    Aluminum heads and autolite 3924's

    yeah the autolite heat rang is the last 2 numbers. Like paul said, 25 is stock or NA heat, then for boosted you go 1 or 2 steps colder 24 or 23.. The 39 i guess is the that designation for the length. All i know is i snugged em up and she fired right up.. the good part is i could go 3...
  10. RyanSG

    Aluminum heads and autolite 3924's

    yeah thats wht was happening to me i could tell it was running bad as well as i was getting smoke at idle. The bad part was i switched to a stand alone ECU and i figured it was just my settings... after comparing the stock type an the 3924's there about 2x as long into the head... I just hope...
  11. RyanSG

    Aluminum heads and autolite 3924's

    Hey guys, changen my plugs and i was told to use the 3924's by a few people. I;m not sure what to gap them at since i'm running a turbo setup.. I was thinking .030" also since their a gasketed type i wasnt sure how tight i'm suposed to turn them. I have em in and i can still turn them but i...
  12. RyanSG

    standalone wideband

    depends what type your lookin into......
  13. RyanSG

    Plug gapping make more HP in my application????

    How can you tell if a spark plug is "blowing out" AKA how does it sound or feel?
  14. RyanSG

    Anyone running a Spec Stage 2 plus clutch?

    Agreed man, had mine for quite a long time 2 and still grabs like a mo-fo... Just gotta get used to it, and put it in neutral when sittin at a light.... Just give a lil most spce when in bad traffic so you can let the clutch out a bit insted of tryen to slip it for only a few feet... But...
  15. RyanSG

    att. someone with Fcam

    yeah mine idles at 8-9Hg with the e-303 cam...
  16. RyanSG

    Just bought my Megasquirt Stand Alone ECU

    hey guys, well the install is done! My FPR was fuzunked and messing everything all up but i got it running with the 50lb/hr injectors. Just gotta road tune it whithin the next few days. I'm running a t70 60mm turbo with a .84 exhaust a/r and .70 compressor a/r. I get 13 psi at 3K(ish) but i...
  17. RyanSG

    Quad Shocks...need 'em?

    i was wondering about putting a turnbuckle type of setup there for more room for wider tires etc. like say a 1/2 rod with 2 turn buckle ends on... It would remove the quad shock but i'm not sure if the solid mount would work? It would stop axle rotation though but it really wouldn't dampen...
  18. RyanSG

    bad 5.0 wreck on rt 13

    ditto, had an explorer the first yea rthen the stang... gotta respect the power and RWD... Not bashen anyone but somtimes ppl drive FWD's and AWD and get into a RWD and get themselves in trouble way to easy... I feel bad to the kids parents to man, all there gunna be thinkin now is why did we...
  19. RyanSG

    E-303 cam advanced 4 degrees with boost?

    yeah i have the T5 in it. Well it sound sliek i'm going to leave it 0 deg adv/ret lol. def not gunna give me anything worth while lol. Thx for the info guys!
  20. RyanSG

    E-303 cam advanced 4 degrees with boost?

    Hey guys, i was browsen again and came accross some e-cam questions but i didn't want to jack the guys thread so i figured i would post new. I aso have the e-cam and i herd a few people saying that davanceing the cam by 4 degrees (i'm guessing at the timing chain) that it will give better...
Top Bottom
Back
Forums
Menu