Search results

  1. 7D3mach

    Here's my idea

    Thanks for all the info guys. Ya I doubt if it will give any extra power, I just think it would be a neat experiment. One buddy of mine picked up a tenth in his fox body with something similar, but nothing says it was from that "mod." I'm always up for a project so this will give me something to...
  2. 7D3mach

    Here's my idea

    Ya I'm aware of that but the hard part will be shipping to Canada. :canada: So I figure if I can build something with junkyard parts that might do for now until our Canadian suppliers get the parts too.
  3. 7D3mach

    Here's my idea

    Ok so I don't whore up ga289stocker's thread I figured I would start my own. Now I was wondering how hard it would be to make that ram air box work with a NASA hood. http://www.ramairbox.com/ I see some of you guys have used an air cleaner and seal to make a base for the original style ram air...
  4. 7D3mach

    Ram Air install and Battey relocate finished..

    I don't mean to whore this thread but does anyone think that a ram air system like that could be made to work with a NASA hood? It might be a cheap alternative for poor university students like myself. Also, did you notice any difference in performance? Let us know the results!
  5. 7D3mach

    I have a carfax suscription now... for 1 month

    Would you mind doing a couple of VINs for me? The first is 1FALP42TXSF100653 and the other is 1FALP42X1VF128610. These cars are both at auction so it's hard to find anything out. You can post up the results or email em to [email protected] Thanks a lot.
  6. 7D3mach

    Carfax vin?

    Could somebody run a couple of VIN's for me as well? The first is 1FALP42TXSF100653 and the other is 1FALP42X1VF128610. These cars are both at auction so it's hard to find anything out. Thanks a lot.
  7. 7D3mach

    Need More Aftermarket Parts For 71-73 Stangs

    So am I!
  8. 7D3mach

    Need More Aftermarket Parts For 71-73 Stangs

    Good news guys, I'm not crazy. Here's a link to those new interior quarters I was talking about before. http://cgi.ebay.com/ebaymotors/71-72-73-MUSTANG-FASTBACK-INTERIOR-TRIM-PANELS-NEW_W0QQitemZ140034666798QQihZ004QQcategoryZ140732QQrdZ1QQcmdZViewItem Enjoy!
  9. 7D3mach

    Need More Aftermarket Parts For 71-73 Stangs

    Ok I checked before I posted and now I went back and can't find them either. I'll look again tomorrow though.
  10. 7D3mach

    Need More Aftermarket Parts For 71-73 Stangs

    Check out eBay, Laurel Mountain Mustang has reproduction panels.
  11. 7D3mach

    interior uphostery!!!!!!!!

    Canadian Mustang was good to me for quite a while I will admit that. The problems actually started when I ordered the upholstery. They sent the wrong ones (box was labelled wrong) and then refused to take them back. Eventually they took them back but would not cover my costs of shipping them...
  12. 7D3mach

    interior uphostery!!!!!!!!

    As far as I know all of the parts suppliers get their upholstery from TMI Products. When I bought the upholstery for my 73 Mach 1 I called TMI directly and asked if they could send me a sample of the vinyl. Sure it took a week to get the sample but then I was sure of what I would be getting. I...
  13. 7D3mach

    Tire Pressure Decal location 73 stang

    Ok so I went out to measure where the decal was, I don't know if you care but I figured it might help. The bottom of the decal is about 1/8" above the washer on the striker bolt. Hope this helps.
  14. 7D3mach

    Tire Pressure Decal location 73 stang

    It goes on the passenger side door jamb. EDIT: I should have been more specific, it goes on the quarter panel side.
  15. 7D3mach

    Seat Emblems/Hardware

    When I did the seats in my Mach 1 I used a dremel to grind the studs. To put the emblems in the new covers I used a push on nut thing and then put some JB Weld on the end to keep it from coming off. The emblems are still on there so it must have worked. Hope this helps
  16. 7D3mach

    302 intake swap

    Nope just a stock 2V on there that needs a rebuild anyway, so I figured I might as well swap. Anybody have a guess as to if I'll see an increase in power. I'm also using a Holley 4160 600cfm carb. Thanks
  17. 7D3mach

    302 intake swap

    Great! that's exactly what I needed to know. Thanks
  18. 7D3mach

    302 intake swap

    Well I know it isn't the best choice but when you're a student and money is tight you take what you can get. The 302 is only in there until I can afford to rebuild the original engine so I don't want to sink a lot of money into it. Sure I could use the cast intake but the whole point of this...
  19. 7D3mach

    302 intake swap

    Nope, don't remember an "L" shaped coolant port. The heads are 302's and have a D4 part number. Thanks for your help!
  20. 7D3mach

    302 intake swap

    So the time has come to swap a 4V intake onto my 302. I have a Ford factory aluminum 4V intake which i believe is off an 84 (E4) but the engine and heads are 74 (D4). When I got the intake gaskets there were two different sets in the package - one that matches the intake, and one that matches...
Top Bottom
Back
Forums
Menu