Search results

  1. Dallasgt01

    Cams, Springs and Headers Install????

    I plan on doing a Install of everything on the 5th :banana: ... but i need alittle help on how to do this crap... I never opened up a modular motor it has been all 5.0s and 350s stroked to 383 hehe...i heard you have to drop the K member on the headers but am clueless on how to do that...no...
  2. Dallasgt01

    How loud would....

    it is REALLY REALLY loud.. I have the stock manifolds with a set of 3" cutouts for track use and i mean DAMNNNNN i could not even imagine with LTs not yet atleast hehehe
  3. Dallasgt01

    Cheapest place to buy 2000 Cobra R's?

    i bought a REAL set not the Aftermarket one from USA motorsports in arlington Texas they were the cheapist on the REAL Y2K R's
  4. Dallasgt01

    Nitto 255/40/17 and 235/45/17 on stock wheels

    you can put a set of 275/45Zr17 on the stock 99+ Gt rims.. Nittos also run alittle thinner then other tires...up front no more then a 265/45zr17....It will rub....I run the Nittos DRS 315/35ZR18... And that is a huge tire it is mainly for track use... Stret wise i ave a set of 275/45Zr18s.... I...
  5. Dallasgt01

    Should I sand this down???

    600 till you get to 2000 wet sanding it... that will port then polish it by the time you are done....
  6. Dallasgt01

    Should I sand this down???

    hell yeah i would sand everything in there down to where it is like a 1mm - 2mm thickness of a wall hell you have another one so why not... see if you have a hp increase
  7. Dallasgt01

    Gears and Slicks are worthless

    You did not know that each sticker is worth atleast 15WHP and that NOS one OMG it is like a 65-75WHP increase <~~~i need one of those
  8. Dallasgt01

    Gears and Slicks are worthless

    with 4.10s i think my 60 ft went up to like 4.26 on a set of Nitto DRs god with the stock 3.27 i was runing in the 1.9s damn it.. that was on a drag radial also...
  9. Dallasgt01

    HELP - 2001 GT Mods

    pulleys 100.00, chip 200.00, Intake plenuim 150.00, Drop in K&N 39.00
  10. Dallasgt01

    for you 96-98 NPI head guys

    bump
  11. Dallasgt01

    PLEASE HELP!! 4.10/WRX question

    Hey i dont mean to argue but whe i had the STOCK 3.27 i would TOP OUT IN 3RD at about 100mph when u change gears it will make the RPM rap up faster so i dont see how with 4.10s ur still in 3rd at 115mph i doubt you could do those with the 2.?? gears ford makes
  12. Dallasgt01

    Last computer question I promise

    when you take your comp out of the kick panel it will go in the very top part you will have to remove the black cover of the top then with a brillo pad remove the glue that is on there...make sure your batt is disconnected..
  13. Dallasgt01

    Long Tubes a waste on N/A cars.

    sorry but i have almost every single bolt on there is for the 4.6L besides Cams, Port and polish heads, Headers and the steed TA... i just purchased a set of Bassani Headers and the guy i know i bought them from had them on his car and he would kick my cars ars... i run a 13.2-13.5 1/4 mile with...
  14. Dallasgt01

    Another "What next" question here.

    i personally did Long Tubes(Bassani), Mid pipe o/r x(Bassani) and cams (Comp cams Stage II)i have only spent 300 for the LT and O/R X and i spent 600 for cams... i wish i could do the heads but the gaskets and bolts alone are 300 for the heads...With the LT it only cost me like 50.00 for new...
  15. Dallasgt01

    Transmission Problem: Need HELP! Vid inside.

    i had the same prob it was my tranny mount... It is not hard you just have to jjack the car up and put something to hold the trans up with and swap the mount out...
  16. Dallasgt01

    for you 96-98 NPI head guys

    complete PI SWAP for sale http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33617&item=2461278670
  17. Dallasgt01

    Widest Tires on MY 00 MUSTANG GT??

    you can run a 275/40ZR17 on those rims but they will not grip as good as ther 255 or 265.. Yeah there is alot of sidewall buldge there it looks alrght but take the money you were going to spend on the tires and get the rims WIDENED to a 10" rims then run some 305-315s
  18. Dallasgt01

    Royal Purple Motor Oil

    IF i was YOU i would strongly recommend AMS OIL i can get it for $5.00 per quart 10w30. Plus shippingi am ams oil in the cobra and i mean i have never spent 40.00 that did so well i mean man that is really a nice oil...
  19. Dallasgt01

    Free Carfax

    http://www.fox5dc.com/news/newslinks.shtml There you guys go...
  20. Dallasgt01

    Comp Cams 102600

    bump
Top Bottom
Back
Forums
Menu