Search results

  1. 9646gt

    What is the redline at on the factory tach?

    Thanks!
  2. 9646gt

    What is the redline at on the factory tach?

    Trying to find a good looking replacement for the crappy v6 overlay on my gauge cluster someone installed. Most seem to show like a 7k red line. Isn't it jsut before 6k on the stock GT tach?
  3. 9646gt

    EE FAIL on cluster in test mode...bad cluster?

    Saw over on mustangworld and one other site that if while in test mdoe on your gauge cluster, if you goto EE and it alternates between EE and FAIL you have a bad instrument cluster. WTF? Mine def does this. However I am assuming my cluster works fine. Minus that v6 gauge overlay someone...
  4. 9646gt

    Best Sparkplug for 99 GT

    Ngk that are compatible with stock plug really. Unless you have crazy mods, you won't see any major difference from plug unless yours are bad ;)
  5. 9646gt

    Thud coming front driver side suspension...

    That's exactly the brand I bought today. My ball joints made no noise at all when shaking the wheel....jsut that inner tie rod. Is the car still ok to drive in the mean time if I take it easy on sharp turns or avoid them? It seems to have no effect on anything other than the noise :/
  6. 9646gt

    Anywhere to buy a stock GT or bullit gauge overlay?

    I can't stand to look at these V6 white face gauges the previous owner put in my stang! Is there somewhere I can buy the stock overlay or even a bullit overlay? All I have found on ebay is the white face ones or a black with a not so stock font and a 6600 rpm redline. I know you can buy the MAC...
  7. 9646gt

    Thud coming front driver side suspension...

    Had my wife rock the steering wheel back and forth while car was on the ground and I was laying under the front bumper. Heard a very audible clicking and light thud coming from the part of the tie rod that is covered with a boot. This is the inner tie rod right? Is there an affordable upgrade...
  8. 9646gt

    Thud coming front driver side suspension...

    Does the entire front end need to be up when doing these checks or is the one side efficient?
  9. 9646gt

    Thud coming front driver side suspension...

    Ok so jsut bought this 01 GT with 52k. It has spent the Alaska winters in storage and it just came out of storage about 2 days before I bought it. It drove perfect the entire 6 hour drive home. But after some spirited highway driving on the way back..taking some long sweeping turns its making a...
  10. 9646gt

    How to adjust freeplay slop in clutch pedal?

    I think that's my problem! I have done the auto adjustment constantly with no luck. However...while driving I can pull up on clutch pedal with my toe and leave it in that adjustment position and never hear a single noise from it! How hard is the quadrant to change? Does the cable also have to be...
  11. 9646gt

    How to adjust freeplay slop in clutch pedal?

    I pretty much remember how to adjust the actual quadrant but I can't quite figure out how to adjust free play. The pedal is making a annoying rattle at different RPMs and such. Sounds like a peice of loose trim somewhere. But when I touch the pedal I can feel it moving a little freely up and...
  12. 9646gt

    Picking up the stang tmrw!

    vin comes back as a GT lol. Looks like previous owner bought the wrong gauges ;) Mods where on the car from the owner before this guy lol. I will pull those out ne ways.
  13. 9646gt

    Ford C and B spring questions Also pic request with and without dead coil cut!

    hum..looks good . did you cut a coil in the rear? I am affraid if I don't cut it I will not get much of a lowering in the rear...but then again I am not sure I want to hack brand new springs. How bad off was your alingment? If it wasn't to bad I may can do it myself. My buddy has a setup for...
  14. 9646gt

    Ford C and B spring questions Also pic request with and without dead coil cut!

    Just can't decide if I want progressive front springs or jsut stick with buying the C springs. Ride quality isn't a big deal...my question is if I am more into drag races and twisty roads wich spring should I go with? I am thinking C since they are a constant rate spring. Also I can't decide if...
  15. 9646gt

    Picking up the stang tmrw!

    If all goes as planned tmrw I am flying to Anchorage to pick up the stang I am buying! It's my 5th stang..with my previosu ones being a 89 lx 4cyl at age 16 a 90 and 95 gt at age 23 and a 99 v6 at age 18 roughly. The one I am buying will be around for a long time lol. I have been so sick since...
  16. 9646gt

    Wanting to buy this stang..need opinions..

    Well my bank is being gay and only wants to loan 8550.00 on it so I am trying my best to talk him down and maybe seal a deal by tmrw afternoon and pick it up saturday. Wish me luck guys...I want another stang so bad!
  17. 9646gt

    Can someone please run a carfax?

    1FAFP42X81F131964 is the VIN. I would greatly appreciate it guys! Thanks in advance!
  18. 9646gt

    Wanting to buy this stang..need opinions..

    LOL In Alaska you can't touch a 97 or 98 with under 100k un modded for less than 6500 or so. And shipping up here is around 2700 bucks and that's not counting a plane ticket to go check the car out first ;) I am just going to bite the bullet and go for it. I don't plan to sell it ANY time soon...
  19. 9646gt

    Wanting to buy this stang..need opinions..

    lol I have never seen a mach in the entire state. There is a 99 cobra for around 10 but it's got like 90k
  20. 9646gt

    Wanting to buy this stang..need opinions..

    Found the information on the TSB I had forgotten about that one. I will check into it. Owner says the car shifts perfect and has never had any issues. My gues is the previous owner before him had it done. Either way I will try and find out. Hell, it may have a t45
View older results
Top Bottom
Back
Forums
Menu