Search results

  1. jansen29

    Roll Bar rear down strut ideas?

    I am redoing my cage a bit since the rear down struts only go to the sheet metal behind the rear seat. I plan on plating it to the floor of the trunk but not sure the best location. Option 1, is to plate it at the front of the trunk right behind the rear seat and then X the bar from strut to...
  2. jansen29

    sn 95 swap to a 351w

    Quick time performance should have a bellhouseing that will fit. Make sure you read all the product information or all them.
  3. jansen29

    Problems

    I at last got the carb I need..I was way under. I got the new Holley ultra double pump 750 and it will peel the paint of the car now...If you are wondering what I have it in now it an forged eagle 347 kit with H beam rods and a main cap girdle , comp cam 35-522-8. intake 232 and exhaust 240 at...
  4. jansen29

    master cylinder

    thanks for the info guys...I went with the late model from the bronco II and it seems to be working well. I will see if I can get some photos up tomorrow.. thanks again for the help
  5. jansen29

    Pair of Lacy rims and tires need a home

    Hey guys, If no one is interested in these I plan on turning them in to the recycling center next week. So, if some one wants them let me know,
  6. jansen29

    master cylinder

    you dont know that part number for that one do you?
  7. jansen29

    master cylinder

    Hey guys, Has anyone had an issue with their master cylinder leaking from the top? Mine is six months old and it has a new seal and everything and it has messed the paint up I just shot. Any ideas or suggestions on a newer type master cylinder that might work better..
  8. jansen29

    Pair of Lacy rims and tires need a home

    I have a set of Four Lacy rims and tires that I do not need if any one is interested and you just have to pay for the shipping. To see a photo look up my car under the Ghia section its a 78 convertible and it's under Jansen York. I currently live in Ft Riley Ks.... let me know if anyone is...
  9. jansen29

    Problems

    Cobra 7, What did you change ur jets sizes out to?
  10. jansen29

    Wiring issues

    Hey guys, I just put in my new motor and while I was at it a I relocated my fuse box to the kick panel on the drivers side. When I went to turn it over no love. I get the keyed power but no start. So I tracked it down to the blue and red wire that goes to the "S" terminal on the starter...
  11. jansen29

    Wire color for fuel gauge

    I have a 78 with a 302 in it and my white yellow with a white strip in it. Jansen
  12. jansen29

    T5 converision

    I have a t-5 in mine and I had all kinds of hoops I had to jump to get it done. Yes the t-5 bell housing is shorter and fat. THis is what I did. I use a quicktime bellhouse for a t-5 on a mustang II and yes they make it. Then I used a center force light weight SFI flywheel and clutch set up. I...
  13. jansen29

    front alignment

    So, what would solve that issue? Welding some more metal at the top where the a arm shaft bits into the metal? Thanks, Jansen
  14. jansen29

    front alignment

    Thanks for the help, I had a shop do the alinement but it took them three times to get it right. There are no lock washers or washer of any kind under the nuts so I thought I would get some lock washers and some plylock nuts and put those on. As far as I know it was torqued correctly but...
  15. jansen29

    front alignment

    Yes, it is the upper A arm that slid out on me. Someone that was talking on the phone coming down an on ramp did not see me so I had to go down a small hill to keep from hitting them and I think it slid out on me. Also this happened again when I hit a big pot hole before. I have new A Arms and...
  16. jansen29

    front alignment

    Hey everyone, Has anyone had any issue with there alinement just slipping out on them and if so what did they do to stop it from doing it again. This has happened to me three times now. Thanks, Jansen
  17. jansen29

    Nice PhotoShop Restyle

    Wow, Almost looks like my car besides the top looks alot better on yours.
  18. jansen29

    Dash Pannel Wiring Harness

    Just to let everyone know the fuel sending wire is the yellow with the white strip. I got the new gauges in and it looks good. I will try and get some photos up tomorrow and some photos of the new 8.8 rear end I put in as well.
  19. jansen29

    Dash Pannel Wiring Harness

    Hey guys, I am in the process of replacing my gauges in my dash and it would make it alot easier if some one knows the wiring that matchs the number on the dash pannel harness. I have a 78 Ghia with a 302. I looked at the photo on the mustang II tech site for some one that label there dash...
  20. jansen29

    U joints

    Thanks guys, That is the issue my so called custom drive shaft is about 1 3/4 in to long. I am going to put my new 8.8 in next week and then have the drive shaft changed again off the new rear end. Good thing I'm not driving the car to much right now. Again thanks for the help.
Top Bottom
Back
Forums
Menu