Search results

  1. Mustangmaker67

    How do I get this front end?

    All my fiberglass came from the Mustang depot, It was tough to fit but was alot better then some of the others I've tried.
  2. Mustangmaker67

    '67 Mod motor stang

    I have no pics at the moment but I have done mod swaps, I will try to get pics of previous swaps soon. DVS has finish the MIB car and it turned out pretty nice. There was a short article in one of the recent Mustang monthly about it. DVS Has lots of Mod Motors and has a connection with FORD's...
  3. Mustangmaker67

    1967 GT500E Vert W/IRS MII Frt

    It's not Paul Andrews. I'm not sure he would like me giving out his name, so I will discuss it with him first. He is however, I new Mustang Fan. I had to explain to him how these cars were never built like this. He did know How much the White Unique Motors car sold for. And how rare a vert is at...
  4. Mustangmaker67

    1967 GT500E Vert W/IRS MII Frt

    Final Destination is, believe it or not. within 4 miles of where it spent most of it's life. Cherry Hill NJ. The new owner lives very close to the address I found on the original Title. The new owner had no clue of the car history or the man that bought it originally. HOw cool is that?
  5. Mustangmaker67

    The Reenmachine DOHC '67 Shelby Clone Convertible Progress

    Cluster looks great!!!! I'd order a couple. Let me know how much and how soon. Kid looks great too!!! I have one in college and one is senior. It's been awhile since I held any newborns. Good Luck!!!!
  6. Mustangmaker67

    got a new plan, and some questions about rust sealers and such.

    Be very careful about having your car dipped. I just had one done at a very well known business. They told me that all the acid was neutralized but it wasn't between the seems in the metal. I've tried everything to stop the seeping out of this acid, and yet it still seeps and causes paint to...
  7. Mustangmaker67

    1967 GT500E Vert W/IRS MII Frt

    Hello all, I was checking out the forums and saw all the projects. I thought I would show off the one I just finished. 1967 Vert with the Maier Eleanor kit installed. 01 Cobra IRS, Heidt's Mustang II frt suspension W/ power Rack & pinion, IDIDIT tilt steering column, Coil over shocks, Griffin...
  8. Mustangmaker67

    attach Eleanor panel ?

    I just finished up a GT500E Convertible, I bonded and Riveted all the Side skirts, wheel wells, frt valance, bolted the upper nose cone, then blended all the the fiberglass except for the upper nose panel. I also trimed off the lower parts of the frt of the fenders after I attached the valance...
  9. Mustangmaker67

    I think Ford can find a problem now!

    Sounds to me like an Axle bearing has shelled itself. Thus the flat tire sound, and If your brake pedal is pulsating it probable is letting the rear rotor/drum wobble. thus pushing brake fluid back to the master cylinder giving you the pulse. If it gets bad enough the axle will cut itself into...
  10. Mustangmaker67

    Something wrong with air conditioning

    I've run into this in a few cars, The engine actually overrevs the AC compressor causing the clutch to slip some. Thus making mor noise then normal. If you rev and cause this more and more it will cause the compressor clutch to fail. Problem is Ford hasn't figured out a "True fix" yet. Theve...
  11. Mustangmaker67

    2000 GT Trans Case Swap

    I currently restomoding a 67 vert I would like to use a 4.6- auto, But the only trans a I have is broken badly, and I can't find another case or a Core Trans. Anybody have one Or know where I could get a case?
  12. Mustangmaker67

    The price of a 70Stang...

    I have a 70 Mach 1 up for sale right now, 351C FMX, new 4 bbl edelbrock, fresh rebuild on engine, New exhaust, 4 new firestone firehawks, new radiator, new trunk lid, new rear wing, $4500 500 want-to-be-Mustangers, No buyers yet.
  13. Mustangmaker67

    Mustang II conversion

    P.S. Tim's Hot Rod shop in Washington State has Heidt's system on a sale now where it has a power Rack and 11 1/2 inch brakes and the deluxe crossmember for $1695 and NO shipping!!!!! I'll try to find his web site and post it. He ran an ad on EBAy, You might look there. I bought one 2 weeks...
  14. Mustangmaker67

    Mustang II conversion

    I've read all the post on this, Frankly, Heidt's system installs easily, uses disc brakes, Rack & pinion steering. All of which we all need. At a price that's affordable. It's a "No Brainer" If you want to go into a corner so fast that it could possible fail, #1 your nuts, #2 Your abusing your...
  15. Mustangmaker67

    2000 GT Vert For Parts

    Use the classified section! :mad: Read the forum rules.
  16. Mustangmaker67

    Mustang II front With Cobra IRS ?

    I know they hold up pretty good under normal conditions, But you know some guys, They can break anvils!! I've never broke one, of course I'm not trying to.
  17. Mustangmaker67

    My 67 Fastbacks Pics

    Both have 289's green one has factory Air & disc brakes, red c4, green one has 4 speed.
  18. Mustangmaker67

    Mustang II front With Cobra IRS ?

    Oh yea, I forgot The cobra is weak for guys who love to spend lots of money on engine parts ,, I guess I'm more into shock value then "BROKEN PARTS VALUE" If I wanted to build a drag car I would, But it wouldn't have a 8.8 in it now would it?
  19. Mustangmaker67

    My 67 Fastbacks Pics

    Just figured out how to post pics thought you might like to see these. The green one belongs to a friend, and the red one is mine. All of my good pics have files too large. So I'll have to post more later.
  20. Mustangmaker67

    Mustang II front With Cobra IRS ?

    Sure,,, When it's done. What engine? Color? Supension? Interior? E-kit, Or Shelby? I do have a Couple of part cars I'll sell the roof panel & Fastback stuff though
Top Bottom
Back
Forums
Menu