Search results

  1. J

    spoiler bolt removal....need help

    one of the alen bolts that holds on my spoiler is stripped. ( the head is stripped) im trying to get it out so i can replace it but im not having any luck. trying using an easy out, but cant get a straight on shot at it because of where the access hole is. anyone have any ideas on how i can get...
  2. J

    door lock actuator replacement?

    mine died. i bought the replacement kit from LMR. is the replacement pretty much straight forward? or is there a write up i should read? thanks guys Joel
  3. J

    need hardware for a gt spoiler, where to get??

    the bolts on my saleen spoilder are stripped so the spoilder rattles, where do i get new hardware for a saleen or gt spoiler? thx Joel
  4. J

    understeer after coilover install?

    hm, thanks for the info, if you could post those rates if you can find them that would be awesome
  5. J

    understeer after coilover install?

    i had the alignment done right after i put the coilovers in. ive read something on the MM website that after putting in their coilovers its suggested that you switch front sway bars because the stock one is too stiff. is there any truth to this?
  6. J

    understeer after coilover install?

    just what the title says, ive noticed i have a bit more understeer after my coilover conversion, does anyone know why? all suspension mods are in my sig. sorry if this is a repost kthanks Joel
  7. J

    horrible problem after a arm install

    left front was 0.0 camber 3.0caster .76in toe right front was .8camber 2.0caster .75in toe total toe was 1.51in so i think it was my toe that was way off
  8. J

    horrible problem after a arm install

    got the car aligned, the pulling is gone along with most of the shutter however its still there a bit, what in the hydrolic system would cause this?
  9. J

    horrible problem after a arm install

    ill start there, if i get it aligned and then loosen and tighten the bolts is it going to screw up my fresh alignment? cuz the only time i have to get it done is tomorrow morning and i dont have time to loosen them and tighten them before tomorrow morning
  10. J

    horrible problem after a arm install

    crap....yeah i torqued them while they were hanging. :(
  11. J

    horrible problem after a arm install

    the pulling is probably due to the misalignment, im going to get it done hopefully friday morning, im more worried about the shutter that happens when i turn the wheel when standing still. it only does it when the motor is running, the rack bushings were replaced along with the rack about a year ago
  12. J

    horrible problem after a arm install

    so i installed my MM tubular a arms today. install went ok but when i went for a test drive the steering pulled to the right, also when the car sits idling and i turn the wheel to the left or right there is a horrible shuttering feeling and it almost looks like the car raises or lowers a bit...
  13. J

    ordered MM tubular A arms

    awesome, they should be here today, hopefully i can get them in tonight and i'll post about how the install went, i hope it gets rid of a bit of the play in the front suspension, im pretty sure my balljoints are shot
  14. J

    ordered MM tubular A arms

    i dont think it would be too much for a daily driver, i have a stock k member but other than that im running mostly tubular stuff, it makes it a bit stiff but its nice
  15. J

    ordered MM tubular A arms

    im already running full MM coilovers so i figured i might as well spend the extra $50 on the tubular ones.
  16. J

    ordered MM tubular A arms

    just ordered them right now, i needed new bushings and balljoints so i figured why not. :D anyway im stoked, anyone have any opinoins on them? also how hard is the install? seems pretty straight forward thanks joel
  17. J

    right hardware for a saleen spoiler?

    hmm ok, i didnt see any hardware kits for gts on lmr's website, anyone know where i can pick one up?
  18. J

    right hardware for a saleen spoiler?

    one of my screws holdilng my spoiler on is loose but the head it stripped and its rattling and driving me insane. these dont look the same as the ones that are holding my spoiler on right now but will these work? 86-93 SCREWS, REAR SPOILER, LX MUSTANG
  19. J

    96 to 04 a arms on a fox body??

    i'll skip the newer a arms, as far as money goes that at this point isnt as much of an issue as the downtime for the car. the reasoni keep leaning towards new a arms from MM either tubular or not is because i want to be able to just unbolt the old ones and bolt up the new ones. anyone with ideas...
  20. J

    96 to 04 a arms on a fox body??

    so i found that the a arms for a newer mustang are cheaper through MM than the ones for fox bodys. will they if on a fox? theyre about half the price. thanks Joel
Top Bottom
Back
Forums
Menu