Search results

  1. F

    explorer intake just a "bolt on" replacement???

    I have a lower off a 93 explorer, gt-40, for sale.
  2. F

    Needed: Clean no hassle one wire alt setup

    Title said it all. Looking for advice on how to fabricate a clean one wire alt setup for a road race 86 5.0 coupe, trunk mounted battery, painless wiring harness......any advice or ideas? Thanks.....it's coming along....slowly
  3. F

    8.8 bolt torque specs

    My stupid Haynes manual does not have the torque specs for the ring gear or the carrier bearing cap bolts, any help? Thanks:shrug:
  4. F

    8.8 Rearend Question

    Hey modular2v your mailbox on stangnet is too full let me know how to contact you so we can do this.
  5. F

    8.8 Rearend Question

    Hey Modular2v, there is a god. Be glad to trade housings. my email is [email protected]
  6. F

    8.8 Rearend Question

    Had the reaend rebuilt with all new parts only to discover that the previous owner had the housing modified for c-clip eliminators. So not only am I out about $300 bucks in labor I have to get a new housing. I have a 86 coupe what 8.8 rear ends will work and have the exact demensions as...
  7. F

    Bad vendor info

    Yeah folks this is D&D in Valencia, California, not to be confused with anyone else. www.dndmotorsports.com
  8. F

    Bad vendor info

    Here is the story. I ordered a flaming river manual rack for my 86 race project from D&D Motorsports, dealt with a guy named Dave. Ordered this thru their Ebay ad for this item. I got the rack which was suppose to come with tie rod ends. It did not..oh this was in May 05 I believe. As of...
  9. F

    Bad vendor info

    Here is the story. I ordered a flaming river manual rack for my 86 race project from D&D Motorsports, dealt with a guy named Dave. Ordered this thru their Ebay ad for this item. I got the rack which was suppose to come with tie rod ends. It did not..oh this was in May 05 I believe. As of...
  10. F

    Pulleys and water pump p/s alt issues

    Money money money...regards to the electric wp
  11. F

    Pulleys and water pump p/s alt issues

    Currently building a 86 coupe for road racing/autocross. I've converted the car to manual brakes and steering. So the pulley setup on the motor has drastically changed. Anyone know a good aftermarket vendor they would reccomend, maybe a kit they know of? Also can you change out a reverse flow...
  12. F

    Pulleys and water pump p/s alt issues

    Currently building a 86 coupe for road racing/autocross. I've converted the car to manual brakes and steering. So the pulley setup on the motor has drastically changed. Anyone know a good aftermarket vendor they would reccomend, maybe a kit they know of? Also can you change out a reverse flow...
  13. F

    Pulleys and water pump p/s alt issues

    Currently building a 86 coupe for road racing/autocross. I've converted the car to manual brakes and steering. So the pulley setup on the motor has drastically changed. Anyone know a good aftermarket vendor they would reccomend, maybe a kit they know of? Also can you change out a reverse flow...
  14. F

    sn95 spindles/brake upgrade

    I found a set of 94/95 sn95 spindles, however how can you tell by looking at them if they are in fact off of a 94 or 95 stang? I don't have the donor car to verify the origin and I don't want to get ripped off. Thanks
  15. F

    Wheel and Tire question...another one

    Thanks, but I need size and fittiment advice I'm familiar with the MM Konigs, to much money and I'm set on the Cobra R's any advice on if this set up will have any contact issue?
  16. F

    Wheel and Tire question...another one

    I have an 86 coupe with the baer track kit all the way around. This car is a dedicated roadrace car and I'm building it up to compete in races such as the Silver State Classic. I need to select wheels and tires. I feel that the Cobra R 17x9's would be a good choice with 245/45 17 up front and...
  17. F

    17x10.5 or 15x10 which one?

    Hey Rflow Let me know how this works I'm building a full race (roadrace, silver state classic) 86 LX coupe. Probably going with Cobra R's 17x9 all around, I cannot have any rubbing issues (high speed blowout issues) so I'm curious to see if you have any clearance problems with the 17x9's...
  18. F

    86 Coupe 5 lug wheel issues

    cause the sn95 spindles are wider...and with tire clearance issues already I didn't want to go any wider track.
  19. F

    86 Coupe 5 lug wheel issues

    Just ordered the Baer Track kit with 13" front rotors, mounted on machined fox spindles (included in the kit). I plan on using 95 Cobra R wheels. The Baer rep said that because that is a sn95 wheel there will be some issues with the spindle punching thru the center cap. He did say that 5 lug 95...
  20. F

    Need to upgrade the brakes on 86 coupe

    Uhh that sux Gee I did'nt know that...cars got 33 spline moslers and a heck of a posi unit....maybe I should sell it outright and go back to stock???
Top Bottom
Back
Forums
Menu