86 Coupe 5 lug wheel issues

[flyingtexan]

Just ordered the Baer Track kit with 13" front rotors, mounted on machined fox spindles (included in the kit). I plan on using 95 Cobra R wheels. The Baer rep said that because that is a sn95 wheel there will be some issues with the spindle punching thru the center cap. He did say that 5 lug 95 cobra R wheels made for the fox spindle are available.

Any sources or ideas? Will the wheel fit without center caps? This is not a street car or a show car, I just need wheels that work and are safe at high speed..

Thanks

 

[Mustang5L5]

Why not just buy the Baer track kit for Sn95 spindles? It will solve all your problems and is a better design. (Sn95 vs Fox)

 

[flyingtexan]

cause the sn95 spindles are wider...and with tire clearance issues already I didn't want to go any wider track.

 

[Mustang5L5]

cause the sn95 spindles are wider...and with tire clearance issues already I didn't want to go any wider track.

Only 96-04 spindles are wider...8mm to be exact.

94-95 spindles retain the same front track as the Fox Mustang. This is what i run without any issues.