Search results

  1. moneypit94

    I made 500rwhp!!

    Wow.. Looking at the numbers and the curve you should have spun it harder. Looks like that cam is designed to make power at higher rpms. If you would have gone up to 6200-6500 you would have peaked past 500 easily. And you have a super unique setup! I like! I always wondered about the...
  2. moneypit94

    Dyno results from a dynomite dyno.

    first run of the day at 14 psi and 10ish afr. final run of the day at 20 psi.
  3. moneypit94

    Dyno results from a dynomite dyno.

    This was all done with E85 and on a Land and sea, Dynomite dyno. @14psi made 525 starting off with a flat 10.5 afr. @14psi Upped it to 12.0 flat afr and made 575. @14psi Added some timing and made huge area under the curve but about 578 peak. @20psi and a slightly lean but headed back rich...
  4. moneypit94

    msd overdrive alternator pulley?

    thanks for the info. I ordered the 48mm. Was like 18 dollars after shipping. Im not sure with it being an aftermarket alternator if it would have overspun it at 15,000 rpms but its best to be safe anyway.
  5. moneypit94

    msd overdrive alternator pulley?

    It has a stock pulley on it now. I bought a used alluminum underdrive kit from a guy without alternator pulley. My chrome alternator has a chrome pulley and all i was thinking at the time was it goes nicely with the other pulleys. Its supposed to be a 200 amp alternator but at idle its spinning...
  6. moneypit94

    msd overdrive alternator pulley?

    I have been watching my dumby voltage guage and noticed it moving coming off idle. Well i Just remembered that I have underdrive pulleys and never replaced the alternator pulley. I found just an overdrive alternator pulley on ebay that should put the rpms of the alternator back to about...
  7. moneypit94

    twin turbo 427 project car back on the streets (pics)

    yeah. its a built glide.. couldn't tell you what gears but that would make sence.
  8. moneypit94

    twin turbo 427 project car back on the streets (pics)

    you may notice that the standard 03 cobra bumper has an extra lip that comes down. Well mine did too untill i caught it coming off the trailer when i took it to have it dynoed and snapped a big chunk of it out. But it broke just right that i took and cut off that 2-3 inch lip off all the way...
  9. moneypit94

    Just had alternator rebuilt, what voltage should it be putting out at idle?

    Funny you should mention that. Because i spent about 40 bucks on 4 guage wire to run to the motor directly from the battery in back. I also went crazy grounding everything including the pms, the injector driver, ignition module, etc. And the last time i had it tuned at AFM they took a wire...
  10. moneypit94

    twin turbo 427 project car back on the streets (pics)

    yeah i remember you chris. I believe I started talking to you when you were stationed in Korea and you are/were air force correct? And Oson sounds familiar. I wonder why my tranny makes noise and yours doesn't. I asked about it on hardcore50 and they said it was normal. :shrug: Well it...
  11. moneypit94

    twin turbo 427 project car back on the streets (pics)

    What tq convertor do you have? Is it an aftermarket case build-up? Do you have a transbrake? Do you use it much. What issues have you had? When you put it in reverse do you have to manually switch the solenoid? What rear end gear are you running?
  12. moneypit94

    twin turbo 427 project car back on the streets (pics)

    Yeah to get everything to clear the wastegates i had to make a custom shroud to were i cut out the electric fan out of the old shroud and carefully bolted it to the new shroud and then turned my overflow tank around to fit the other direction. Its not perfect but does the job. What really...
  13. moneypit94

    Just had alternator rebuilt, what voltage should it be putting out at idle?

    It did fix a lot of stuff with the new ECM. It helped the drivability in it greatly. I think what it did was make it to were it would idle with a slight load like a normal automatic car will do when you put in in drive and hold the break, as to were the manual computer didn't really like this...
  14. moneypit94

    twin turbo 427 project car back on the streets (pics)

    Yes, I like the glide. Its noisy but it puts the power to the ground extremely smoothly and makes it almost all useable. I don't know about cruising or excellerating after your already moving but i do know that it is extremely sluggish taking off and the power it seems to be taking to move the...
  15. moneypit94

    twin turbo 427 project car back on the streets (pics)

    Actually I just got done reading and article about a guy who dynoed his powerglide. These are the only actual numbers i have seen. I will say that I do like the powerglide because for the power im at it puts it to the ground fairly smoothly so i don't just rip the tires off each time...
  16. moneypit94

    Just had alternator rebuilt, what voltage should it be putting out at idle?

    Im using a AFM PMS piggy back system. I don't remember seeing anything about voltage changes in it.
  17. moneypit94

    331ci 9:1 compression AFR 185 comp headed dyno results inside!

    Those numbers are unblievably good and im totally jealous. You have a way of working out every possible hp and ET times out of your setups. I guess i just never had the patience to do that. I got bored and power hungry with each of my previous setups the little time i had them. And now your...
  18. moneypit94

    twin turbo 427 project car back on the streets (pics)

    That is an Edelbrock EFI Elbow that I and a friend modified. I guess i should give him most of the credit. We cut off the end and welded a piece of aluminum tubing at an angle. and welded the end back on and sanded and painted. If i remeber right it had enough hood clearance but i wanted a...
  19. moneypit94

    Just had alternator rebuilt, what voltage should it be putting out at idle?

    Im thinking that bad diode had been causing mine inconsistant results on the dyno. I figured this all out when i kicked on the high side of the fan and it would kill the motor if the air fuel wasn't below 13.25. Im thinking the different voltages and current were causing the fuel injectors to...
  20. moneypit94

    twin turbo 427 project car back on the streets (pics)

    Have been tuning out all the bugs and finally got the car on the street and to the car wash for the first time in 5 years (i think). Still have some odds and ends to finish up but its semi streetable at least. I also just got done putting an E85 tune on it. I LOVE THAT STUFF! It's easier to...
Top Bottom
Back
Forums
Menu