Search results

  1. 2

    1st dyno pulls with 100 shot

    I have all the safety goodies window switch 3100-6200 spray, FPSS, and an automatic heater. So when I sprayed on the dyno my pressure was in the green on the guage but I am not sure of the exact pressure. I think once I get the injectors, pump and Mod depot emails my new tune I should be good.
  2. 2

    1st dyno pulls with 100 shot

    My long term plans are a built motor and a 250 shot. So I dont feel like buying things twice and if I run a little rich its no big deal better than lean. I got the parts from Randy at MD FORD 410-655-2000 ext 5618. The pump was 85 and injectors 235 so that was a good price, I searched alot of...
  3. 2

    1st dyno pulls with 100 shot

    I am hoping that with the pump and injectors I will be able to get to 150 shot safely. I am planning on upping the shot atleast 125 on my next dyno but that will be after the retune. Red35th - I am kinda new to nitrous so thanks for the tip about changing my fuel jet i will remember for next...
  4. 2

    1st dyno pulls with 100 shot

    I recently finished installing NX new plate kit for our motors and I was very impressed with the HP and TQ numbers on the dyno. You can see in the graph below my HP was up about 75 and my TQ about 140 :) . The only problem I had was my A/F it never fell below 13.5 which is way too high. I...
  5. 2

    Help with squeaky throw-out bearing please!

    It is a pretty common with the T45 it happened to me and a bunch of other guys on this forum. If you know how many miles you have on it I wouldnt worry so much but if you dont know or have high mileage I would replace it. When I blew my clutch last year with 45k on it the TOB was squeeking...
  6. 2

    NX or NOS?

    The Nitrous will void a warranty just as fast as a chip. I have the plate kit from NX it is a great kit and I have an Xcallibrator with generic tunes from Modular Depot. I am getting dynoed on tuesday so I will post my results then but reflashing the computer only takes about 45 seconds as...
  7. 2

    NX or NOS?

    That the one I have and it works great. :nice: Putting the jets in are a bit of PITA becuase of the plate being under your T/B but otherwise it is and excellent kit.
  8. 2

    Squeaking noise when pushing the clutch

    I had the same problem last year stock clutch and TOB with 45K on them. The I blew my clutch at the track so when I did the repair My TOB was so shot it was almost in 2 pieces. I replaced everything and the problem went away. I think if I would have waited much longer with the TOB it...
  9. 2

    Something Broke - please read!!!!!

    If you did that on a stock block I say you might be buy a new block. It almost sound like a compression issue or you might have cracked the intake and air is getting into the engine. As far as jumping timing Ive heard of it but not with a modular since our chain is so long and it has...
  10. 2

    NOS questions

    NX wet here also I just finished installing mine but I have the new plate kit. I did a little street testing and Its a great feeling when you hit that button. Make you get all the safety equipment or you will blow something up.
  11. 2

    Gauge Cluster

    use one of your switched 12 volt wires that are tied into the light switch. I dont remember which one I used just use a test light.
  12. 2

    Wet/Dry kit

    I just installed NX wet plate kit after alot of question and reading post and I tell you it is worth it. I havent been to the track yet or the dyno (hopefully next week) but I played around a little on the highway and it is by far a great feeling when you reach 3k and it kicks on. I am...
  13. 2

    Hooker header install

    I installed Hooker is Mine on the graound after a couple hours of screwing around trying to get the stage 8 bolts in I dropped the K-member. I should have dropped it right from the begining it wasnt that much extra work and what it was you made up in time for the install of screwing around...
  14. 2

    Took car to the track and now it won't go in 3rd or 4th gear ? Blown synchros?

    I had the same problem last year only more stuff broke and it cost me $700 at Hanlon Motorsports
  15. 2

    3:73's out 4:30's IN

    I have 4.30's sitting a box, but I might not put them in since I just installed 100 shot of N2o. I dont want to run out of gear but the time I get to the end of the track. Shifting to 5th at the end would probably hurt my times.
  16. 2

    96 Cobra Long tubes ,Hooker vs BBK - Fit + Trans Removal ?

    I was able to get my trans out fine in my 2000 with jet hot L/T that are modeled after the hookers. Once you have the trans out just cut a couple of the tabs off the bell housing it will make life easier installing it again. I am pulling my trans again next week it needs rebuilding.
  17. 2

    No Mufflers....Good or BAd

    I love the open pipe sound. I want to get rid of my Borla catback and put on a pair of Dynomax race mufflers with turndowns. Do you guys think the lose of power would be the same as open exhaust??
  18. 2

    L/T removed when changing Cluch????

    I have the Jet Hot L/T and changed my clutch with both pipes in. The Jet Hot's are modeled after the Hookers so they should work also.
  19. 2

    Suspension vs. NOS

    A 100 shot would definetly give the power you need at the track but if you cant put that power to pavement it is useless performance. Go get yourself a set of D/R and some adjustable shocks, also a good set of control arms would'nt hurt. For me I went from 14.2 then I did shocks and D/R and...
  20. 2

    help me run 13s

    Practice and a set of D/R's
Top Bottom
Back
Forums
Menu