Search results

  1. Mustang92

    How much do you owe on your Stang?

    0.00
  2. Mustang92

    cool read, fastest 2v/4v cars around

    This is the latest I have however there are lots of different forums now and I don't spend as much time on all of them any more so I don't know how accurate the list is. 1999 - 2004 2V Naturally Aspirated (PI Heads) 1/8 ET: 1 . Fastest NA 2V - 6.80 @ 102.00 ( 1999 GT 5 SPD - 302ci Mod ) 2...
  3. Mustang92

    Mach 1 Whipple Swap

    I picked these up from Modular Head Shop. My stock 04 heads ported with Livernois valve springs, new guides and valve seals. I'll be starting the longblock assembly this week as well as buttoning up the front suspension changes I made while the car was down. Bill
  4. Mustang92

    Mach 1 Whipple Swap

    The car was already converted to a Eaton set up by me a few months back but I started having oil pressure issues shortly after finishing and started on the next step of my project. I had a shortblock built so I could run more boost and in the process I'm changing a few things on the car...
  5. Mustang92

    Boosting a 96-98 Cobra with 03/04 parts.

    Just FYI but the lightning and some 5.4 truck engines use 8 rib balancers as well.
  6. Mustang92

    Boosting a 96-98 Cobra with 03/04 parts.

    I assume you are going to be moving the blower back so you can run it off of the balancer pulley? How are you going to mount the alternator? Bill
  7. Mustang92

    Boosting a 96-98 Cobra with 03/04 parts.

    Lower intake $400, intercooler $350-400, timing cover $250-400, intercooler adapter, pulley bridge, idler pulley bracket, alternator, balancer, supercharger crank pulley, hardware, intercooler lines, intercooler reservoir, MAF, injectors, rails, upper and lower alternator brackets. If you...
  8. Mustang92

    Mach 1 or Cobra?

    Mach 1 with a Eaton swap FTW! :flag: But then again I'm biased in my opinion. Bill
  9. Mustang92

    is this K-Member/Coil Over Kit ny Good

    Hard to say without seeing the actually struts themselves. That picture is a stock (generic) picture not the correct one for a 99+ car as the lower mounts aren't there. If it's that same style where the strut mounts to the spindle and the strut runs through the spring like a coil over set up...
  10. Mustang92

    How long will stock axles live?

    You should be fine but like it's been said I've seen bone stock Mustangs on Nittos break axles and people like me making 150 or so passes on slicks (making 250RWHP) before breaking the differential. Bill
  11. Mustang92

    32v in a fox

    Actually a pretty nice combo to put together would be to find a teksid shortblock, 01+ continental heads, have the exhaust ports opened up, 03/04 cobra cams (you can find them cheap all over the boards and they are the same as 03/04 mach 1 cams), mach 1 or 99+ cobra intake. Bill
  12. Mustang92

    is this K-Member/Coil Over Kit ny Good

    It's a QA1 K-member. You can get it a little cheaper here...
  13. Mustang92

    Custom Cobra conversion V-6

    :nonono: I didn't realize Cobra emblems made it a conversion. Would the yellow interior accents (that don't match anything on the car make it a banana conversion as well, or maybe a snow plow conversion due to the that horrid front bumper? Best of all is the rebuilt title and thinking the car...
  14. Mustang92

    why is a 4.6 car better? help me make up my mind. lol

    Yep those were the good old days. I sold the car so I could afford my house. Took a few years off and got the Mach 1. I've had it for 14 months and I'm on my third combo. :) http://forums.stangnet.com/786271-mach-1-eaton-swap.html Bill
  15. Mustang92

    why is a 4.6 car better? help me make up my mind. lol

    You beat me to it. My Mach 1 made 306RWHP with a K&N, Bassani Mid Lengths, catted X and a tune. Get a Mach 1 longblock with the stock 3650 and you have a 12 second (on street tires) capable car or high 11's on slicks without even getting into the engine. Drop that into a 4cyl coupe and away...
  16. Mustang92

    Small tid bit of useless information.

    Another reason may have been that the Teksid block has knock sensors and the terminator does not use them so they could not use the Teksid block without machining the block. The iron block does not have knock sensors so really it's the only block they could just take off the shelf and put into...
  17. Mustang92

    Mach 1 Eaton Swap

    Glad to hear someone got some use of those articles. I nearly built another NA 2V but I couldn't pass up the deal on this car at the time. I bought it thinking I wouldn't do much to it but that didn't last long. Bill
  18. Mustang92

    Mach 1 Eaton Swap

    After the car got to full temp I came to a light and the stock gauge dropped to L then came right back. I disregarded it for a fluke and took it to the track. I made two passes and on my way home came to a light and after 30 seconds of idling it dropped to L and stayed there till I gave it some...
  19. Mustang92

    Mach 1 Eaton Swap

    Yeah I picked it up in April of last year.
  20. Mustang92

    Mach 1 Eaton Swap

    November 2005 almost 6 years to the day that I bought it new. I hated to let it go but it was the car or the house and the house won. Now I have both...well different car.
Top Bottom
Back
Forums
Menu